NO reduction by C3H6 over apatite-type A10(PO4)6(OH)2 (A?=?Ca and Sr)-supported Pt catalysts

A₁₀(PO₄)₆(OH)₂ (A = Ca and Sr)-supported Pt catalysts were prepared and their catalytic activity in NO reduction were investigated. The Sr₁₀(PO₄)₆(OH)₂-supported catalyst had high catalytic activity in the C₃H₆?CNO?CO₂ reaction; the activity was higher than that of the ??-Al₂O₃-supported catalyst at 300 °C. The basicity of the apatite supports would affect the chemical state of Pt on catalyst, resulting in promotion of NO reduction.     

DNA-binding small-ligand-immobilized surface plasmon resonance biosensor for detecting thymine-related single-nucleotide polymorphisms

A surface plasmon resonance (SPR) biosensor that carries DNA-binding small ligands has been developed for the detection of single-nucleotide polymorphisms (SNPs). 3,5-Diaminopyrazine derivatives, with a hydrogen-bonding profile fully complementary to the thymine base, were utilized as recognition elements on the sensor surface, and a target single-stranded DNA sequence was hybridized with a DNA probe containing an abasic site to place this site opposite a nucleobase to be detected. In a continuous flow of sample solutions buffered to pH 6.4 (0.25 M NaCl), the 3,5-diaminopyrazine-based SPR sensor can detect an orphan nucleobase in the duplex with a clear selectivity for thymine over cytosine, guanine, and adenine (5'-GTT GGA GCT GXG GGC GTA GGC-3'/3'-CAA CCT CGA CNC CCG CAT CCG-5'; X=abasic site, N=target nucleobase G, C, A, or T). The SPR response was linear in the concentration range 10-100 nM. Allele discrimination is possible based on the combination of different binding surfaces in a flow cell of the SPR system, which is demonstrated for the analysis of the thymine/cytosine mutation present in 63-meric polymerase chain reaction (PCR) amplification products (Ha-ras gene, codon 12, antisense strand). Comparison with a bulk assay based on 3,5-diaminopyrazine/DNA binding shows that the immobilization of 3,5-diaminopyrazine derivatives on the SPR sensor allows more sensitive detection of the target DNA sequence, and binding selectivity can be tuned by controlling the salt concentration of sample solutions. These features of the DNA-binding small-molecule-immobilized SPR sensor are discussed as a basis for the design of SPR biosensors for SNP genotyping.     

Time-resolved fluorescence study on the photomerocyanine form of spiropyran and its derivative with azobenzene

The excited state dynamics of the photomerocyanine (PMC) form originating from spirobenzopyran and the bi-functional photochromic compound spirobenzopyran–azobenzene (SpAz), containing typical photochromic molecules of spirobenzopyran (Sp) and azobenzene (Az), were investigated using picosecond time-resolved fluorescence measurements in solution at 200 and 285 K and in a PMMA polymer film at 298 K. While the fluorescence lifetimes of PMC were about twice as long as those of SpAz under all experimental conditions, both lifetimes showed similar strong dependence on viscosity rather than temperature. These results suggest that non-radiative decay to an intermediate state could be accompanied by a significant conformational change. The effect of the Az moiety in this relaxation process is also discussed. It is unlikely that an energy transfer from the PMC moiety to the Az moiety occurs. It was concluded that the PMC moiety in the bi-functional SpAz is independent from the Az moiety.     

Dioxygenases, key enzymes to determine the aglycon structures of fusicoccin and brassicicene, diterpene compounds produced by fungi

Fusicoccin A and cotylenin A are structurally related diterpene glucosides and show a phytohormone-like activity. However, only cotylenin A induces the differentiation of human myeloid leukemia cells. Since the cotylenin A producer lost its ability to proliferate during preservation, a study on the relationship between structure and activity was carried out and a modified fusicoccin A with hydroxyl group at the 3-position showed a similar biological activity with that of cotylenin A. We then searched for an enzyme source that catalyzes the introduction of a hydroxyl group into the 3-position and found that brassicicene C, which is structurally related to fusicoccin A with hydroxyl group at the 3-position, was produced by Alternaria brassicicola ATCC96836. We recently cloned a brassicicene C biosynthetic gene cluster including the genes encoding fusicocca-2,10(14)-diene synthase and two cytochrome P450s, which were responsible for the formation of fusicocca-2,10(14)-diene-8β,16-diol. In this study, we report that a α-ketoglutarate dependent dioxygenase, the gene coding for which was located in the cluster, catalyzed a hydroxylation at the 3-position of fusicocca-2,10(14)-diene-8β,16-diol. On the other hand, a α-ketoglutarate-dependent dioxygenase, which had been identified in a fusicoccin A biosynthetic gene cluster, catalyzed the 16-oxidation of fusicocca-2,10(14)-diene-8β,16-diol to yield an aldehyde (8β-hydroxyfusicocca-1,10(14)-dien-16-al), although both dioxygenases had 51% amino acid sequence identity. These findings suggested that the dioxygenases played critical roles for the formation of the fusicoccin A-type and cotylenin A-/brassicicene C-type aglycons. Moreover, we showed that short-chain dehydrogenase/reductase located in the fusicoccin A biosynthetic gene cluster catalyzed the reduction of the aldehyde to yield fusicocca-1,10(14)-diene-8β,16-diol.     

Synthesis and study of redox-active acyclic triazenes: toward electrochromic applications

Coupling of various 4-substituted phenyl azides with two distinct quinone-containing N-heterocyclic carbenes (NHCs) afforded the respective mono- and ditopic 1,3-disubstituted acyclic triazenes in moderate to excellent yields (38-92%). Depending on their pendant substituents (derived from the azides), the acyclic triazenes exhibited intense absorptions in the visible spectrum (359-428 nm), which were bathochromically shifted by up to Δλ=68 nm upon reduction of the quinone moiety on the component derived from the NHC. Cyclic voltammetry confirmed that the aforementioned redox processes were reversible, and a related set of UV-vis spectroelectrochemical experiments revealed that bulk electrolysis may also be used to switch reversibly the colors exhibited by these triazenes.     

Hydrodynamic Characterization of Nickel Metal Foam,Part 2: Effects of Pore Structure and Permeability

In this article, the structural characterization of chemical vapor deposition (CVD) nickel metal foam is presented. Scanning electron microscope and post image processing were used to carefully analyze the surface of the nickel metal foams. Data on foam unit cell, ligament thickness, projected pore diameter, and averaged porosity was obtained. Unit cell and projected pore diameters of CVD nickel metal foam possess Gaussian-like distribution. Characteristics of pore structure and its effect on permeability in Darcian flow regime were analyzed. The relations between the permeability, pore size, and porosity are presented. Present and previous data are compared with these relations. Measurement results indicate that the permeability or the viscous conductivity of the CVD processed metal foam is affected not only by the pore size, and porosity but also by the ligament structure.     

Hydrogen bond lifetimes in supercritical methanol–water mixtures via MD simulation

Dynamical features of hydrogen bonds in methanol–water mixtures have been analysed in terms of lifetime in the wide range of conditions, including supercritical states, using a molecular dynamics simulation with flexible potential models. Hydrogen bond characteristics in methanol–water mixtures were investigated by considering the combination of molecular species and donor–acceptor of hydrogen-bonded molecules. The hydrogen bond lifetimes mainly depend on temperature, and those in supercritical condition were about 1/10th of that at ambient condition. Focusing on the composition dependence of the hydrogen bond lifetime, the unique behaviour of that resulting from hydration structure was observed. Moreover, the molecular combination, which showed the largest hydrogen bond lifetime, was different for ambient and high temperature and high pressure conditions. The relationship between hydrogen bond lifetime and molar volume was also calculated to discuss the hydrogen bond lifetime in terms of the collision frequency of molecules and the intermolecular distance.     

Sonochemically synthesized core-shell structured Au–Pd nanoparticles supported on γ-Fe2O3 particles

A sample of Au–Pd bimetallic nanoparticles supported on γ-Fe₂O₃ was synthesized in a sonochemically one-pot process. The structural analyses of the synthesized sample were performed by the techniques of X-ray Absorption Fine Structure (XAFS), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and UV–vis spectrometry. Results indicated that the synthesized sample formed a core-shell structure in which a gold core was surrounded by a thin palladium shell. The reaction rate constant for the hydrogenation of cyclohexene of the present sample showed higher value than that of Pd nanoparticles supported on γ-Fe₂O₃ and core-shell structured Au–Pd nanoparticles supported on SiO₂. The present sample is a promising catalyst material which has a high catalytic activity.