Preparation of AgBiVMoO/-Al2O3 Catalysts for the Partial Oxidation of Propane

A novel mixed sol method was developed for the preparation of supported catalysts. Analyses by means of XRD and BET show that a 40%AgBiVMoO/γ-Al2O3 catalyst prepared by this method possessed high specific surface area and high dispersion of the active phase. As a result, high acrylic acid selectivity of 8.5% was obtained when the catalyst was used in the reaction of propane partial oxidation to acrylic acid in a fixed-bed reactor.     

Indirect laser photoacoustic detection for trace samples on membranes

An indirect laser photoacoustic technique is described. The basic principle, the experimental set-up and the influencing factors are discussed in detail. This method was used to quantify phenylamine, arginine and methylene blue on membranes. The linear ranges of the calibration curve are up to two orders of magnitude. With 1 microliter of sample solution, the detection limits are 0.25, 1.52 and 0.14 pmol for phenylamine, arginine and methylene blue, respectively.     

Molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed to calculate molar conductivity based on mode coupling theory in which the ion transference number is introduced into the theory. The molar conductivities of LiPF6, LiClO4, LiBF4, LiAsF6 in PC (propylene carbonate) are calculated based on this method. The results fit well to the literature data. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.     

Density functional study of the l-proline-catalyzed α-aminoxylation of aldehydes reaction: The reaction mechanism and selectivity

The reaction mechanism of the l-proline-catalyzed α-aminoxylation reaction between aldehyde and nitrosobenzene has been investigated using density functional theory (DFT) calculation. Our calculation results reveal following conclusions [1]. The first step that corresponds to the formation of C–O bond, is the stereocontrolling and rate-determining step [2]. Among four reaction channels, the syn-attack reaction channel is more favorable than that of the anti one, and the TS-ss channel dominates among the four channels for this reaction in the step of C–O bond formation [3]. The intermolecular hydrogen bond between the acidic hydrogen of l-proline and the N atom of the nitrosobenzene in an early stage of the process catalyzes very effectively the C–O bond formation by a large stabilization of the negative charge that is developing at the O atom along the electrophilic attack [4]. The effect of solvent decreases the activation energy, and also, the calculated energy barriers are decrease with the enhancement of dielectric constants for C–O bond formation step. These results are in good agreement with experiment, and allow us to explain the origin of the catalysis and stereoselectivity for l-proline-catalyzed α-aminoxylation of aldehyde reaction. The addition of H₂O to substituted imine proline, intermolecular proton-transfer steps, and the l-proline elimination process were also studied in this paper.     

Design,synthesis, and evaluation of 6-carboxyalkyl and 6-phosphonoxyalkyl derivatives of 7-oxo-8-ribitylaminolumazines as inhibitors of riboflavin synthase and lumazine synthase

A series of 6-carboxyalkyl and 6-phosphonoxyalkyl derivatives of 7-oxo-8-D-ribityllumazine were synthesized as inhibitors of both Escherichia coli riboflavin synthase and Bacillus subtilis lumazine synthase. The compounds were designed to bind to both the ribitylpurine binding site and the phosphate binding site of lumazine synthase. In the carboxyalkyl series, maximum activity against both enzymes was observed with the 3'-carboxypropyl compound 22. Lengthening or shortening the chain linking the carboxyl group to the lumazine by one carbon resulted in decreased activity. In the phosphonoxyalkyl series, the 3'-phosphonoxypropyl compound 33 was more potent than the 4'-phosphonoxybutyl derivative 39 against lumazine synthase, but it was less potent against riboflavin synthase. Molecular modeling suggested that the terminal carboxyl group of 6-(3'-carboxypropyl)-7-oxo-8-D-ribityllumazine (22) may bind to the side chains of Arg127 and Lys135 of the enzyme. A hypothetical molecular model was also constructed for the binding of 6-(2'-carboxyethyl)-7-oxolumazine (15) in the active site of E. coli riboflavin synthase, which demonstrated that the active site could readily accommodate two molecules of the inhibitor.     

锰（Ⅱ）—邻菲口罗啉配合物极谱吸附波及其应用

在ｐＨ９．５ＮＨ３ＮＨ４Ｃｌ缓冲溶液中，Ｍｎ（Ⅱ）与邻菲口罗啉形成的配合物在－１．３６Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的吸附波，一阶导数峰电流与Ｍｎ（Ⅱ）浓度在５×１０－８５×１０－６ｍｏｌ／Ｌ范围内呈线性关系，检出限为２×１０－８ｍｏｌ／Ｌ对极谱性质及反应机理进行了研究，用该法测定了大豆和茶叶中的微量锰，结果满意     

Applications of benzotriazole methodology in heterocycle ring synthesis and substituent introduction and modification

Applications of benzotriazole methodology for the preparation of heterocyclic compounds are reviewed. The characteristic advantages of benzotriazole as a synthetic auxiliary are first briefly considered. This is followed by a summary of its use in ring synthesis in which the construction of small; five-membered; six-membered; and larger heterocyclic rings using benzotriazole methodology are each examined separately. Finally, consideration of the use of benzotriazole in the ring annulation - particularly benzannulation - of heterocycles. Subsequent sections deal with the introduction of substituents into aromatic heterocycles; the ring substitution of saturated heterocycles; and benzotriazole assisted modification of heterocyclic substituents. The present review supplements a recent comprehensive review of benzotriazole chemistry [1] which covers the literature through 1996.