聚氨酯分子印章的制备和表征

“软平板印刷”微结构制备技术为微米和亚微米器件的制备提供了一条新的途径 [1] ,已被电子学家和材料学家所应用 ,近年来进入了生物学领域[2 ] .本实验室将这一方法与生物分子电子学相结合 ,提出了用于 DNA芯片在片合成的分子印章法 [3,4 ] .分子印章法的实质是接触压印与组合化学相结合的固相界面反应 .聚二甲氧基硅氧烷 ( PDMS)是一种软印刷的优良材料 [5] ,但是由于其疏水性和较差的机械性能 ,必须对其进行改性才能用来制备 DNA分子印章 [6 ] .　　聚氨酯作为一种功能材料 ,由于分子中交替的软、硬链段及其不同的热动力学性能而形成…     

卟啉超分子化合物在分子器件中的应用

分子电子器件已成为近年来的一个研究热点，卟啉类化合物因为光敏性好、性能稳定、易于修饰等优点成为分子器件研究的理想模型化合物。本文着重介绍了它在分子器件中的最新应用进展。     

氢化物发生石墨炉原位富集直接测定高温镍基合金中碲

通过选择碲的氢化物发生条件，克服了高含量镍对碲的干扰，把氢化物富集在涂钯石墨管里，然后再原子化，成功地测定了高温镍基合金中碲。     

Chemiluminescence flow system for the determination of ammonium ion

A novel chemiluminescence (CL) system for ammonium ion combined with flow-injection analysis is presented in this paper. It is based on the CL reaction between luminol, immobilized electrostatically on an anion-exchange column, and chlorine electrochemically generated on-line via a platinum electrode from hydrochloric acid in a coulometric cell. Ammonium ion reacts with chlorine and decreases the observed CL intensity. The system responds linearly to ammonium ion concentration in the range 1.0-100 muM, and the detection limit is 0.4 muM. A complete analysis, including sampling and washing, could be performed in 1 min with a relative standard deviation of <6.0%. The system is stable for over 500 determinations and has been applied successfully to the determination of ammonium ion in rainwater samples.     

混合配体、希土三元配合物的研究 Ⅳ.3,5二硝基水扬酸(H2DNSA)、邻菲咯啉(phen)、希土(RE)三元固体配合物的合成及性质

本文报道了十种希土元素与3,5-二硝基水扬酸、邻菲咯啉三元配合物的制备方法。通过元素和化学分析测定了化合物的化学组成,并用红外光谱、紫外光谱、差热分析、磁化率、X射线粉天衍射等对所合成的化合物进行了结构和性质的研究。     

KF/Al~2O~3/PEG 4000(FAP)存在下氯仿的Michael加成反应

在KF/Al~2O~3/PEG4000(FAP)存在下,氯仿可与α,β-不饱和羰基化合物进行Michael加成反应,得到中等产率的三氯甲基化合物。     

Infrared and electronic spectra of copper (II) complex of maleonitriledithiolate and 4,4'-dimethyl-2, 2'-bipyridine and their theoretical studies

The molecular structure and binding, as well as infrared and electronic spectroscopic properties for the title complex Cu(mnt)(dmbpy)(mnt(2-)=maleonitriledithiolate, dmbpy=4,4'-dimethyl-2,2'-bipyridine) were studied in this paper. With semi-empirical PM3 and non-empirical DFT (B3LYP/6-311G*) methods, the molecular geometry of the complex was optimized and corresponding vibrational spectra in the gaseous state were obtained. The calculated results derived from DFT were more reasonable than those from PM3. The point group of Cu(mnt)(dmbpy) in isolated gaseous state was C(2), in which Cu(II) adopted a distorted tetrahedral geometry and the dihedral angle between the N(2)Cu and S(2)Cu planes was about 29.814 degrees. And a complete assignment to the IR spectra of such a complicated molecule was exhibited. With ZINDO/S method an electronic spectrum was calculated. The results showed that the calculated values generally agreed with the observed ones. And a detailed explain was made on its electronic spectra.     

室温以上磁制冷材料La(Fe1-xCox)11.7Al1.3化合物的研究

通过X射线衍射分析和超导量子干涉磁强计（SQUID）磁性测量,研究了Co替代Fe含量对居里温度在室温以上的磁制冷材料La（Fe1-xCox）11.7Al1.3（x=0.072,0.081）磁结构和磁性能的影响。La（Fe1-xCox）11.7Al1.3材料的居里温度随Co的含量增加而增加,La（Fe0.919Co0.081）11.7Al1.3的居里温度为311 K。当外场变化为1.9 T时磁熵变达到3.6 J·kg^-1·K^-1,RCP值为168.6 J·kg^-1,虽然它的磁熵变小于具有巨磁熵变的磁制冷材料,但是它在磁场为1.9 T时的制冷能力与这些材料相当。     

Supramolecular isomers in the same crystal: a new type of entanglement involving ribbons of rings and 2D (4,4) networks polycatenated in a 3D architecture

The reaction of corresponding cadmium salts with the flexible ligand 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene (bbtz) affords the 3D coordination network [Cd3(bbtz)6(H2O)6](BF4)(6.1.75H2O (1), containing ribbons of rings and planar 2D (4,4) networks polycatenated with each other, the undulating 2D (4,4) network [Cd(bbtz)2(H2O)2](ClO4)2.2H2O (2), and ribbons of rings [Cd(bbtz)2(H2O)2](BF4)2.3DMF (3) and [Cd(bbtz)2(H2O)2](ClO4)2.3DMF (4).     

石油焦与煤混合燃料热重分析研究

石油焦与煤混合燃烧是高效处理石油焦的有效方法，作者对选用的石油焦和煤不同配比的混合燃料进行了热重分析研究。使用常压高温热天平研究、分析了各配比混合燃料的热解特性和燃烧特性。并根据化学动力学方法计算了各过程的化学动力学参数，即活化能E和频率因子A0。结果表明，各混合燃料热解起始温度大致相同，随煤焦比减小，挥发分析出速率变缓，最大释放速度所对应的温度升高，最终失重率减小，挥发分释放特性指数减小；随煤焦比增大，混合燃料着火温度和燃尽温度逐渐降低，最大燃烧速率所对应的温度降低，燃烧特性指数增大；随煤焦比减小，活化能和频率因子增大。