Laser-induced periodic surface structures formed on the sidewalls of microholes trepanned by a femtosecond laser

Laser-induced periodic surface structures (LIPSSs) were observed on the sidewalls of 300-μm-diameter holes trepanned on cemented tungsten carbide using femtosecond laser pulses at a wavelength of 800 nm. For a circularly polarized beam, LIPSSs were formed at a period of 300 nm and oriented perpendicularly to the plane of incidence on the sidewalls. For a linearly polarized beam, LIPSS formation was dependent on the relative angle α between the polarization direction and the plane of incidence. For relative angles α from 0° to 70° and from 110° to 180°, LIPSS spacing was 300 nm. However, there were two types of LIPSSs coexisting from 70° to 110°. One had a spacing of 120 nm and the other had a spacing that varied from 500 to 760 nm. It was found that the orientation angle of LIPSSs measured between the LIPSS orientation and the plane of incidence had a nonlinear dependence on α. To understand this dependence, a model was proposed in which LIPSSs are assumed to align perpendicularly to the direction of the absorbed electric field lying in the tangent plane of the sidewall of a drilled hole. The calculated results from this model showed good agreement with the experimental results.     

Exchange interactions in a trigonal chromium (III) pair

The theory of exchange interactions in the excited state of a trigonal chromium(III) pair which occurs in Cs₃Cr₂Cl₉, and first nearest neighbours in ruby, is extended to the singly excited ² T ₁, ² T ₂ and ² E(t ₂ ³) pair states. The multiplet splitting is described by an effective hamiltonian which includes trigonal field, spin-orbit coupling, first-order Zeeman effect and bilinear and biquadratic exchange. Previous calculations on the important single-ion intensity mechanism for ² E pair states are incorrect. The corrected electric dipoles for ² E and also for ² T ₁ and ² T ₂ pair states are presented.     

Inhomogeneous superconducting state in the overdoped regime of La2−xSrxCuO4: Comparison with the superconducting state of NbSe2

We have measured the temperature dependence of the magnetic susceptibility, χ vs. T, and the magnetization curve, M vs. H, for NbSe₂ single crystals, in order to compare the superconducting (SC) state in the overdoped regime of La_2−xSr_xCuO₄ (LSCO) with the SC state of the layered conventional superconductor NbSe₂. While a plateau in χ vs. T in a moderate magnetic field and a so-called second peak in M vs. H, which is due to the marked enhancement of vortex pinning, have been observed in the overdoped regime of LSCO, these behaviors have not been observed in NbSe₂. The present results indicate that the anomalously marked enhancement of vortex pinning is a characteristic feature in the overdoped LSCO where a microscopic phase separation into SC and normal-state regions takes place.     

General, robust, and stereocomplementary preparation of beta-ketoester enol tosylates as cross-coupling partners utilizing TsCl-N-methylimidazole agents

We have developed a general, robust, and cost-effective method for the (E)- or (Z)-stereocomplementary enol tosylation of beta-ketoesters using TsCl- N-methylimidazole (NMI)-Et3N or LiOH. TsCl coupled with NMI formed a highly reactive N-sulfonylammonium intermediate. Stereocongested secondary alcohols were smoothly sulfonylated using Ts(Ms)Cl-NMI-Et3N. beta-Ketoesters underwent (E)-selective tosylation using TsCl-NMI-Et3N and (Z)-selective tosylation using TsCl-NMI-LiOH (total of 23 examples; 60%-99% yield). Stereoretentive Negishi and Sonogashira couplings using enol tosylates proceeded successfully to give trisubstituted alpha,beta-unsaturated esters.     

Facile cell patterning on an albumin-coated surface

Fabrication of micropatterned surfaces to organize and control cell adhesion and proliferation is an indispensable technique for cell-based technologies. Although several successful strategies for creating cellular micropatterns on substrates have been demonstrated, a complex multistep process and requirements for special and expensive equipment or materials limit their prevalence as a general experimental tool. To circumvent these problems, we describe here a novel facile fabrication method for a micropatterned surface for cell patterning by utilizing the UV-induced conversion of the cell adhesive property of albumin, which is the most abundant protein in blood plasma. An albumin-coated surface was prepared by cross-linking albumin with ethylene glycol diglycidyl ether and subsequent casting of the cross-linked albumin solution on the cell culture dish. While cells did not attach to the albumin surface prepared in this way, UV exposure renders the surface cell-adhesive. Thus, surface micropatterning was achieved simply by exposing the albumin-coated surface to UV light through a mask with the desired pattern. Mouse fibroblast L929 cells were inoculated on the patterned albumin substrates, and cells attached and spread in a highly selective manner according to the UV-irradiated pattern. Although detailed investigation of the molecular-level mechanism concerning the change in cell adhesiveness of the albumin-coated surface is required, the present results would give a novel facile method for the fabrication of cell micropatterned surfaces.     

Three-dimensional porous coordination polymer functionalized with amide groups based on tridentate ligand: selective sorption and catalysis

To create a functionalized porous compound, amide group is used in porous framework to produce attractive interactions with guest molecules. To avoid hydrogen-bond formation between these amide groups our strategy was to build a three-dimensional (3D) coordination network using a tridentate amide ligand as the three-connector part. From Cd(NO3)2.4H2O and a three-connector ligand with amide groups a 3D porous coordination polymer (PCP) based on octahedral Cd(II) centers, {[Cd(4-btapa)2(NO3)2].6H2O.2DMF}n (1a), was obtained (4-btapa = 1,3,5-benzene tricarboxylic acid tris[N-(4-pyridyl)amide]). The amide groups, which act as guest interaction sites, occur on the surfaces of channels with dimensions of 4.7 x 7.3 A2. X-ray powder diffraction measurements showed that the desolvated compound (1b) selectively includes guests with a concurrent flexible structural (amorphous-to-crystalline) transformation. The highly ordered amide groups in the channels play an important role in the interaction with the guest molecules, which was confirmed by thermogravimetric analysis, adsorption/desorption measurements, and X-ray crystallography. We also performed a Knoevenagel condensation reaction catalyzed by 1a to demonstrate its selective heterogeneous base catalytic properties, which depend on the sizes of the reactants. The solid catalyst 1a maintains its crystalline framework after the reaction and is easily recycled.     

One-electron photooxidation and site-selective strand cleavage at 5-methylcytosine in DNA by sensitization with 2-methyl-1,4-naphthoquinone-tethered oligonucleotides

Photosensitized one-electron oxidation was applied to discriminate a specific base site of 5-methylcytosine (mC) generated in DNA possessing a partial sequence of naturally occurring p53 gene, using a sensitizing 2-methyl-1,4-naphthoquinone (NQ) chromophore tethered to an interior of oligodeoxynucleotide (ODN) strands. Photoirradiation and subsequent hot piperidine treatment of the duplex consisting of mC-containing DNA and NQ-tethered complementary ODN led to oxidative strand cleavage selectively at the mC site, when the NQ chromophore was arranged so as to be in close contact with the target mC. The target mC is most likely to be one-electron oxidized into the radical cation intermediate by the sensitization of NQ. The resulting mC radical cation may undergo rapid deprotonation and subsequent addition of molecular oxygen, thereby leading to its degradation followed by strand cleavage at the target mC site. In contrast to mC-containing ODN, ODN analogs with replacement of normal cytosine, thymine, adenine, or guanine at the mC site underwent less amount of such an oxidative strand cleavage at the target base site, presumably due to occurrence of charge transfer and charge recombination processes between the base radical cation and the NQ radical anion. Furthermore, well designed incorporation of the NQ chromophore into an interior of ODN could suppress a competitive strand cleavage at consecutive guanines, which occurred as a result of positive charge transfer. Thus, photosensitization by an NQ-tethered ODN led to one-electron oxidative strand cleavage exclusively at the target mC site, providing a convenient method of discriminating mC in naturally occurring DNA such as human p53 gene as a positive band on a sequencing gel.     

Influences of Acidic Conditions on Formazan Assay: A Cautionary Note

Formazan assay has been used for several decades to evaluate metabolic activity of eukaryotic and prokaryotic cells. In particular, it has been often applied for quantitative assessment of viable cells under acidic circumstances caused by, e.g., ischemia and hypoxia. However, little attention has been paid to the influence of acidic pH on formazan assays. We found that acidic culture conditions significantly affect outcomes of the assays. Absorbance of tetrazolium–formazan decreased in a pH-dependent manner without affecting cell viability. This nonspecific effect was ascribed to influences of acidic pH on the production of formazan. Replacement of culture media to fresh medium at physiologic pH partially overcame this problem. The influence of acidic culture conditions should be carefully considered when formazan assays are used for the assessment of viable cells under various experimental situations.