Three New Serratane Triterpenoids from Phlegmariurus squarrosus

Three new serratane triterpenoids, (3α,14α,15α,21α)‐3,14,15,21,29‐pentahydroxyserratan‐24‐oic acid ( 1 ), (3α,21β)‐serrat‐14‐ene‐3,21,24,30‐tetraol ( 2 ), and (3α,21α)‐serrat‐14‐ene‐3,21,24,29‐tetraol ( 3 ), were isolated from Phlegmariurus squarrosus, together with eight known compounds. Their chemical structures were elucidated on the basis of in‐depth spectroscopic analyses.     

Influences of permeation of vanadium ions through PVDF-g-PSSA membranes on performances of vanadium redox flow batteries

The preparation and physical characterization of a poly(vinylidene fluoride)-graft-poly(styrene sulfonic acid) (PVDF-g-PSSA) membrane prepared by a solution-grafting method were described. These membranes exhibited high conductivity with a value 3.22 x 10(-2) S/cm at 30 degrees C. ICP studies revealed that the PVDF-g-PSSA membrane showed dramatically lower vanadium ion permeability compared to Nafion 117. Trivalent vanadium ions had the highest permeability through all these membranes in contrast to pentavalent vanadium ions with the lowest. The VRB with the low-cost PVDF-g-PSSA membrane exhibited a higher performance than that with Nafion 117 under the same operating conditions, and its energy efficiency reached 75.8% at 30 mA/cm(2). The performance of VRB with the PVDF-g-PSSA membrane can be maintained after more than 200 cycles at a current density of 60 mA/cm(2).     

NiOxHy薄膜的电致变色特性和机理

运用循环伏安和阶跃电位方法研究了Ni（OH）2粉末靶直流溅射沉积的NiOxHy薄膜电致变色特性．结合实时的光透射-时间变化，发现着色后的薄膜在零外电势下有一自发的消色过程，该过程可能对应着Li 的自发注入。着色没有自发过程，获取了着消色状态Ni2p3／2和O1s的XPS谱，表明在着色态镍被氧化，消色态镍被还原，相应地氧的化学环境发生改变．     

A New 18(13 → 12β)‐abeo‐Lanostadiene Triterpenoid from Ganoderma fornicatum

A new triterpenoid, fornicatin C (= (3β)‐3‐hydroxy‐18(13 → 12β)‐abeo‐lanosta‐13(17),24‐dien‐18‐oic acid; 1 ), was isolated from the fruiting bodies of Ganoderma fornicatum, together with the known compounds fornicatin A ( 2 ) and fornicatin B ( 3 ), among other constituents. The structure of 1 was elucidated by means of spectroscopic techniques, and those of 2 and 3 were identified by comparing their spectroscopic data with those reported in the literature.     

Dimethyl azo(bisisobutyrate) and C(60) produce 1,4- and 1, 16-Di(2-carbomethoxy-2-propyl)-1,x-dihydro

Thermal decomposition of dimethyl azo(bisisobutyrate) in a solution containing C(60) produced 1,4- and 1, 16-di(2-carbomethoxy-2-propyl)-1,x-dihydro[60]fullerenes in yields of 21% and 27%, respectively, based on reacted C(60). The structure of this first 1,16-dialkyl-1,16-dihydro[60]fullerene was assigned from (13)C 2D INADEQUATE NMR spectra. The 1,16-isomer has first and second electrochemical reduction potentials shifted positively by 0. 18 V relative to those of the 1,4-isomer. From the close similarity of all spectral, chromatographic, and electrochemical data, the previously unassigned isomer of 1,x-di(2-cyano-2-propyl)-1, x-dihydro[60]fullerene, which was obtained from azo(bisisobutyronitrile) and C(60), is also a 1,16-isomer.     

Theoretical study of the surface energy and electronic structure of pyrite FeS2 (100) using a total-energy pseudopotential method, CASTEP

The geometric and electronic structures of FeS(2) (100) surface have been studied by a quantum-mechanical calculation using a total-energy pseudopotential code, CASTEP. The (100) surface is very stable and does not give any significant geometric relaxation. The electronic structure of FeS(2) (100) surface is characterized by the appearance of new native surface states in the bulk band gap, which correspond to antibonding mixed Fea-Ssp(3) states. These surface states play an important role as mediators of electron transfer on both anodic and cathodic sites in the incipient oxidation of pyrite. Moreover, the (100) surface has small band gaps and shows some metallic character. It is predicted that the rate of cathodic reductive reaction of O(2) in the incipient oxidation of pyrite is much faster than previously considered. The transport of electrons from the anodic sites to the cathodic sites on the (100) surface is faster and hole injection of anodic sites is not the rate-determining step. So we can deduce that the rate-determining step of incipient oxidation for pyrite consists of both electron transfer of pyrite/aqueous O(2) interface and the splitting of H(2)O.     

A direct injection high-throughput liquid chromatography tandem mass spectrometry method for the determination of a new orally active alphavbeta3 antagonist in human urine and dialysate

A generic high-throughput liquid chromatography (HTLC) tandem mass spectrometry (MS/MS) assay for the determination of compound I in human urine and dialysate (hemodialysis) was developed and validated. By using the HTLC on-line extraction technique, sample pretreatment was not necessary. The sample was directly injected onto a narrow bore large particle size extraction column (50 x 1.0 mm, 60 microm) where the sample matrix was rapidly washed away using a high flow rate (5 mL/min) aqueous mobile phase while analytes were retained. The analytes were subsequently eluted from the extraction column onto an analytical column using an organic-enriched mobile phase prior to mass spectrometric detection. The analytes were then eluted from the analytical column to the mass spectrometer for the determination. The linear dynamic range was 2.0-6000 ng/mL for the urine assay and 0.1-300 ng/mL for the dialysate assay. Intraday accuracy and precision were evaluated by analyzing five replicates of calibration standards at all concentrations used to construct the standard curve. For the urine assay, the precision (RSD%, n=5) ranged from 1.9 to 8.0% and the accuracy ranged from 87.8 to 105.2% of nominal value. For the dialysate assay, the precision (RSD%, n=5) ranged from 1.1 to 10.0% and the accuracy from 94.5 to 105.2% of nominal value. In-source fragmentation of the acyl glucuronide metabolite (compound III) did not interfere with the determination of parent compound I. The developed HTLC/MS/MS methodology was specific for compound I in the presence of compound III. Column life-time is increased and sample analysis time is decreased over traditional reversed-phase methods when direct injection assays for urine and dialysate are coupled with the technology of HTLC.     

Three New Triterpenoids from Lycopodium japonicum Thunb

Three new triterpenoids, (3β,8β,14α,21α)‐26,27‐dinoronocerane‐3,8,14,21‐tetrol ( 1 ), (3β,8β,14α,21β)‐26,27‐dinoronocerane‐3,8,14,21‐tetrol ( 2 ), and lycopodiin A ( 3 ), together with four known compounds, lycoclavanol ( 4 ), lycoclaninol ( 5 ), α‐onocerin ( 6 ), and 3‐epilycoclavanol ( 7 ), were isolated from Lycopodium japonicum Thunb (Lycopodiaceae). Their structures were established by means of spectroscopic analyses. Compounds 3 and 7 showed moderate antitumor activity. Compounds 4 and 6 exhibited acetylcholinesterase inhibition activity.     

REVERSE ATOM TRANSFER RADICAL POLYMERIZATION OF STYRENE WITH COPPER-BASED CATALYST

 "Living"/controlled radical polymerization of styrene was carried out with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS)/CuCl₂/bipyridine (bipy) initiation system at 120℃. The molecular weights of resultant PSt increased with the monomer conversion and the polydispersities were in the range of 1.37 ～ 1.52. A linear ln([M]o/[M])versus time plot was also obtained indicating the constant concentration of growing radicals during the polymerization with this initiation system. End group analysis by ¹H-NMR spectroscopic studies showed that the end groups of the polymer obtained is cω-functionalized by a chlorine group from the catalyst and a-functionalized by a (carbethoxy-cyano-phenyl)methyl group from the fragments of the initiator. Having C1 atom at the chain end, the PSt obtained can be used as a macroinitiator to promote a chain-extension reaction with fresh St and block copolymerization reaction with a second monomer, such as methyl methacrylate, in the presence of CuC1/bipy catalyst via a conventional ATRP process.     

Rigid nanoscopic containers for highly dispersed, stable metal and bimetal nanoparticles with both size and site control

We demonstrate a novel strategy for the preparation of mesoporous silica-supported, highly dispersed, stable metal and bimetal nanoparticles with both size and site control. The supporting mesoporous silica, functionalized by polyaminoamine (PAMAM) dendrimers, is prepared by repeated Michael addition with methyl acrylates (MA) and amidation reaction with ethylenediamine (EDA), by using aminopropyl-functionalized mesoporous silica as the starting material. The encapsulation of metal nanoparticles within the dendrimer-propagated mesoporous silica is achieved by the chemical reduction of metal-salt-impregnated dendrimer-mesoporous silica by using aqueous hydrazine. The site control of the metal or bimetal nanoparticles is accomplished by the localization of inter- or intradendrimeric nanoparticles within the mesoporous silica tunnels. The size of the encapsulated nanoparticles is controlled by their confinement to the nanocavity of the dendrimer and the mesopore. For Cu and Pd, particles locate at the lining of mesoporous tunnels, and have diameters of less than 2.0 nm. For Pd/Pt, particles locate at the middle of mesoporous tunnels and have diameters in the range of 2.0-4.2 nm. The Pd and Pd/Pt nanoparticles are very stable in air, whereas the Cu nanoparticles are stable only in an inert atmosphere.