Electropolymerization of single‐walled carbon nanotubes composited with polypyrrole as a solid‐phase microextraction fiber for the detection of acrylamide in food samples using GC with electron‐capture detection

We developed a solid‐phase microextraction coupled to GC with electron‐capture detection method for the detection of acrylamide in food samples. Single‐walled carbon nanotubes and polypyrrole were electropolymerized onto a stainless‐steel wire as a coating, which possessed a homogeneous, porous, and wrinkled surface, chemical and mechanical stability, long lifespan (over 300 extractions), and good extraction efficiency for acrylamide. The linearity range between the signal intensity and the acrylamide concentration was found to be in the range 0.001–1 μg/mL, and the coefficient of determination was 0.9985. The LOD, defined as three times the baseline noise, was 0.26 ng/mL. The reproducibility for each single fiber (n = 6) and the fiber‐to‐fiber (n = 5) repeatability prepared in the same batch were less than 4.1 and 11.2%, respectively.     

Development of a sensitive and reliable high performance liquid chromatography method with fluorescence detection for high-throughput analysis of multi-class mycotoxins in Coix seed

As an edible and medicinal plant, Coix seed is readily contaminated by more than one group of mycotoxins resulting in potential risk to human health. A reliable and sensitive method has been developed to determine seven mycotoxins (aflatoxins B₁, B₂, G₁, G₂, zearalenone, α-zearalenol, and β-zearalenol) simultaneously in 10 batches of Coix seed marketed in China. The method is based on a rapid ultrasound-assisted solid–liquid extraction (USLE) using methanol/water (80/20) followed by immunoaffinity column (IAC) clean-up, on-line photochemical derivatization (PCD), and high performance liquid chromatography coupled with fluorescence detection (HPLC-FLD). Careful optimization of extraction, clean-up, separation and detection conditions was accomplished to increase sample throughput and to attain rapid separation and sensitive detection. Method validation was performed by analyzing samples spiked at three different concentrations for the seven mycotoxins. Recoveries were from 73.5% to 107.3%, with relative standard deviations (RSDs) lower than 7.7%. The intra- and inter-day precisions, expressed as RSDs, were lower than 4% for all studied analytes. Limits of detection and quantification ranged from 0.01 to 50.2 μg kg⁻¹, and from 0.04 to 125.5 μg kg⁻¹, respectively, which were below the tolerance levels for mycotoxins set by the European Union. Samples that tested positive were further analyzed by HPLC tandem electrospray ionization mass spectrometry for confirmatory purposes. This is the first application of USLE-IAC-HPLC-PCD-FLD for detecting the occurrence of multi-class mycotoxins in Coix seed.     

Studies on C-Glycosides XIII C-Glucosides from O-Glucosyl 3,5-Dinitro Benzoate

From O-glucopyranosyl 3,5-dinitro benzoate(1) and aryl ethers C-glucosides were obtained stereoselectively in the presence of Lewis acid in high yield. In most cases, the β-anomer was formed.     

Fusion Dynamics of Aqueous Glutamic Acid/Aminodecane/Ibuprofen Vesicles

Vesicles have been prepared at a constant molar ratio of L-glutamic acid/1-aminodecane/ibuprofen/H₂O. The fusion dynamics of the vesicles have been directly observed and followed by using optical microscopy and freeze fracture replication-electron microscopy technologies. With time increasing up to 25 minutes, the vesicles slowly fuse to form large stable vesicles. A membrane phase transition temperature is detected at 97°C.     

羟基磷灰石及其复合材料对重金属的吸附研究进展

羟基磷灰石具有特殊的晶体结构,对二价的重金属离子有很强的结合力,是一种可用于环境污染治理的新型功能性材料。它可有效地吸附去除水中的Pb2+,Cd2+,Cu2+,Zn2+,Co2+,Ni2+等重金属离子,但其粉体的结构却限制了它在水环境中的实际应用。随着纳米技术、复合材料技术的发展,在羟基磷灰石的基础上开发出的具有高效吸附性能或分离特性的新型材料在重金属吸附研究中显示了潜在的优势。本文综述了羟基磷灰石及其复合材料对水中重金属去除方面的研究进展,探讨了它对重金属吸附机理,并对羟基磷灰石进一步的研究提出了展望。     

Preparation and characterization of ZrCO/C composite aerogels

Zr-containing organic aerogels were synthesized by ligand substitution reaction of polyzirconoxone and 2, 4-dihydroxybenzoic acid, followed by polymerization with formaldehyde, and then supercritical drying using CO₂. After carbonization and carbothermal reduction under an argon atmosphere, ZrCO/C composite aerogels with controllable zirconium content (47.8–78.6 wt%) were obtained. The carbothermal reduction was substantially completed at 1,500 °C, and the obtained ZrCO/C composite aerogels exhibit low oxygen contents (9.4–6.7 wt%) and high surface areas (589–147 m²/g). Pore morphologies of the ZrCO/C composite aerogels were investigated in detail by nitrogen sorption measurements, scanning electron microscopy and its associated energy-dispersive X-ray microanalysis measurements. The results show that the aerogels are composed of carbon framework and Zr-conglomerations, and the surface area of aerogel is severely affected by its zirconium content. The presence of reductive ZrC crystals can greatly enhance the oxidation resistance ability of amorphous carbon framework and prevent collapse.     

Self‐Assembled Poly(N‐methylaniline)–Lignosulfonate Spheres: From Silver‐Ion Adsorbent to Antimicrobial Material

Self‐assembled poly(N‐methylaniline)–lignosulfonate (PNMA–LS) composite spheres with reactive silver‐ion adsorbability were prepared from N‐methylaniline by using lignosulfonate (LS) as a dispersant. The results show that the PNMA–LS composite consisted of spheres with good size distribution and an average diameter of 1.03–1.27 μm, and the spheres were assembled by their final nanofibers with an average diameter of 19–34 nm. The PNMA–LS composite spheres exhibit excellent silver‐ion adsorption; the maximum adsorption capacity of silver ions is up to 2.16 g g^?1 at an adsorption temperature of 308 K. TEM and wide‐angle X‐ray results of the PNMA–LS composite spheres after absorption of silver ions show that silver ions are reduced to silver nanoparticles with a mean diameter of about 11.2 nm through a redox reaction between the PNMA–LS composite and the silver ions. The main adsorption mechanism between the PNMA–LS composite and the silver ions is chelation and redox adsorption. In particular, a ternary PNMA–LS–Ag composite achieved by using the reducing reaction between PNMA–LS composite spheres and silver ions can be used as an antibacterial material with high bactericidal rate of 99.95 and 99.99 % for Escherichia coli and Staphylococcus aureus cells, respectively.     

Dynamic Electrosorption Analysis as an Effective Means to Characterise the Structure of Bulk Graphene Assemblies

Restacking of graphene sheets to a graphite‐like structure is a prevailing problem that is known to compromise the performance of individual graphene sheets in an assembled bulk form. To address this common problem efficiently and monitor the structure and quality of graphene products comprehensively, it is highly desirable to develop reliable metrology techniques for characterising graphene‐based materials on a bulk assembly level and in a quantitative manner. Here, by revisiting the physicochemical principle of electrosorption, we propose a simple electrochemical approach, namely dynamic electrosorption analysis (DEA), as an easily accessible and effective technique for evaluation of the self‐stacking behaviour of graphene. Taking multilayered chemically converted graphene films as a model, we demonstrate that the DEA technique can effectively reveal very subtle variation in accessible surface area and pore size of graphene assemblies in the liquid phase and thus can provide useful insights to the experimental design relating to restacking control. This work also reveals the huge effect some routine processing conditions, such as heat treatment and drying, can have on the structure and performance of graphene‐based bulk materials, providing useful guidance for future manufacturing of this class of materials.