A Home-made Simple Set-up for Measurement of Electrochemical Surface Tension Spectrum on a Mercury Drop Electrode

A setup for recording surface tension curves at a mercury drop during potential scanning is designed based on photo-sensitive detection system. Surface tension spectrum at Hg drop can be recorded by voltammetric study. A Yb(III)-NO2- catalytic reduction system was used for characterization. The simple, sensitive technique can be expected to provide fresh information on molecular interactions at electrode surfaces.     

Titania membrane preparation with chemical stability for very hash environments applications

The high-quality tubular titania MF membranes are successfully prepared by dip-coating techniques and systematically investigated with regard to their corrosive resistances. The experiments show that dispersants PAA and anatase powder were preferably employed to prepare desired suspensions with solid loading 10–15 wt.% and that suspensions properties significantly affect the final membranes quality. The titania MF membranes with pure water permeability 742.42 l m⁻² h⁻¹ bar⁻¹ and 0.1 μm pore diameter have been obtained using the prepared suspensions. The corrosion resistance of titania membranes exhibits that the anatase layers are more stable than the alumina supports in boiling corrosive medium and that the poor quality titania MF membranes become more deteriorated due to its top layer pore blockages and fouling layer formation, which provides a wide range of practical application fields in very hash environments with reliable data supports.     

N(1)取代5-氟尿嘧啶乙酸、5-氟尿嘧啶丙酸与Cu(Ⅱ)、Co(Ⅱ)、Ni(Ⅱ)、Zn(Ⅱ)、Mn(Ⅱ)的配合物的合成及表征

合成了N(1)取代5-氟尿嘧啶乙酸、5-氟尿嘧啶丙酸与铜(Ⅱ)、钴(Ⅱ)、镍(Ⅱ)和锰(Ⅱ)的十种金属配合物。通过元素分析、差热-热重分析确定了它们的化学组成,并对这些化合物进行了红外光谱、氢核磁共振谱,电子光谱的表征。讨论了各配合物中金属离子与配体的配位状态。在Cu(Ⅱ)配合物中,Cu(Ⅱ)是与配体的N³原子和C⁴上的羰基氧原子配位,其他金属配合物中,金属离子是与配体的C²的羰基氧原子和羧基配位。     

Carbomolybdate clusters formed by carbonyl insertion into molybdenum-oxygen bonds. Structural investigation of the [RMo4O15X] core (R = ---C9H4O, X = OCH3; R = ---C14H10, X = ---C7H5O2; R = C14H8, X = ---OH)

[C₄H₉)₄N]₂[Mo₂O₇] reacts with a variety of organic species containing α-diketone groups to give tetranuclear complexes of general composition [RMo₄O₁₅X]³⁻. The complexes [(C₄H₉)₄N]₃[(C₉H₄O)Mo₄O₁₅(OCH₃)] (I), [(C₄H₉)₄N]₃[(C₁₄H₁₀)Mo₄O₁₅(C₆H₅CO₂)] (11) and [(C₄H₉)₄N]₃[(C₁₄H₈)Mo₄O₁₅(OH)] (III) were synthesized from the reactions of dimolybdate with ninhydrin, benzil and phenanthraquinone, respectively. Complex II may also be prepared from dimolybdate and benzoin in acetonitrile-methanol solution, from which it co-crystallizes with the binuclear species [(C₄H₉)₄N]₂[Mo₂O₅(C₆H₅C(O)C(O)C₆H₅)₂] · CH₃CN · CH₃OH (IV). Complexes I–III exhibit the tetranuclear core, previously described for the α-glyoxal derivatives [(C₄H₉)₄N]₃[(HCCH)Mo₄O₁₅X], where X = F⁻ or HCO₂⁻. The ligands may be formally described as diketals, formed by insertion of ligand carbonyl subunits into molybdenum-oxygen bonds. The structures I–III differ most dramatically in the identity and coordination mode of the anionic ligand X⁻ which occupies a position opposite the diketal moiety relative to the [Mo₄O₁₁]²⁺ central cage. Thus, I exhibits a doubly bridging methoxy group in this position, while II possesses a benzoate ligand with an unusual μ₃-O,O′coordination mode. Complex III presents a hydroxy-group unsymmetrically bonded to three of the molybdenum centres. The stereochemical consequences of the various coordination modes are discussed. Crystal data: Compound I, monoclinic space group Pc, a = 24.888(2), b = 12.897(3), c = 24.900(3) Å, β = 101.94(2)°, D_calc = 1.28 g cm⁻¹ for Z = 4. Structure solution and refinement based on 8695 reflections with F_o 6σ(F_o) (Mo-K_α, λ = 0.71073 Å) converged at a conventional discrepancy factor of 0.060. Compound II, orthorhombic space group Pbca, a = 20.426(6), b = 26.916(6), c = 32.147(7) Å, V = 17673.2(20) ų, D_calc = 1.33 g cm⁻³ for Z = 8; 5224 reflections, R = 0.076. Compound III, tetragonal space group I4₁/a, a = b = 48.129(6), c = 13.057(2) Å, V = 30246.2(12) ų, D_calc = 1.35 g cm⁻³ for Z = 16; 5554 reflections, R = 0.053. Compound IV, orthorhombic space group Pnca, a = 16.097(4), b = 16.755(4), c = 25.986(7) Å, V = 7008.1(13) ų, Z = 4, D_calc = 1.18 g cm⁻³ ; 2944 reflections, R = 0.061.     

苯基异硫氰酸酯衍生氨基酸的高效液相色谱分析

苯基异硫氰酸酯衍生氨基酸的高效液相色谱分析杨扬,秦强,郭伟忠（江苏石油化工学院应化系常州２１３０１６）１前言采用苯基异硫氰酸酯（ＰＩＴＣ）衍生氨基酸并用高效液相色谱测定的报道国外较多￣［１－４］。该法的优点是ＰＩＴＣ与氨基酸、亚氨基酸都能反应生成ＰＴ...     

CoMo／Al_2O_3和CoMo／TiO_2－Al_2O_3加氢脱硫催化剂的研

研究了ＣｏＭｏ／Ａｌ２Ｏ３和ＣｏＭｏ／ＴｉＯ２－Ａｌ２Ｏ３催化剂的加氢脱硫性能，并用ＬＲＳ，ＸＲＤ和ＴＰＳ等方法表征其表面相结构和硫化行为．结果表明，以ＴｉＯ２－Ａｌ２Ｏ３为担体的Ｍｏ和ＣｏＭｏ催化剂的活性均比相应的Ａｌ２Ｏ３为担体的高；少量Ｃｏ，Ｎｉ助剂的引入可显著提高ＭｏＯ３在担体上的分散度和改进催化剂的活性；Ｃｏ助剂还有降低Ｍｏ物种硫化温度的作用．     

EDTA-甘氨酸联合法制备LaAlO3基电解质材料及其电性能

采用EDTA-甘氨酸联合法(EGCP)合成具有钙钛矿结构的La0.90Sr0.10Al0.97Mg0.03O3-δ(LSAM)粉体。采用TG-DSC,XRD,ICP-OES和TEM对粉体进行表征。在750℃下,无定形结构的粉末直接转化为钙钛矿结构的LSAM粉体。经1000℃煅烧3 h后的粉体,团聚程度低,粒径分布均匀,平均粒径约为77 nm,具有良好的烧结性能。通过SEM对材料的显微结构进行观察并分析其对电性能的影响。采用直流四电极法在空气中测定材料的总电导率,在800℃时,EGCP合成的LSAM电解质的总电导率为1.50×10-2S.cm-1,比固相法的高47.1%。     

固相萃取-液质联用法同时测定水中的喹诺酮类和磺胺类抗生素

建立了固相萃取-超高效液相色谱三重四级杆质谱联用法同时测定水中痕量的5种喹诺酮类和6种磺胺类抗生素残留的方法,水样经过固相萃取富集后由液相色谱分离、三重四级杆质谱检测。该方法在8 min内完成对11种目标化合物的分析。喹诺酮类抗生素线性范围为0.5～50μg/L,磺胺类抗生素线性范围为1～100μg/L,相关系数均大于0.995,6次空白加标重复测定的相对标准偏差(n=6)为喹诺酮类抗生素5.3%～9.0%,磺胺类抗生素4.7%～10.2%。11种目标化合物的方法检出限在0.04～0.22 ng/L之间,实际样品的加标回收率为62.1%～137%。该方法操作简便,重现性好,可用于地表水中抗生素的检测。     

Kinetic studies of the urease-catalyzed hydrolysis of urea in a buffer-free system

The kinetics of urea hydrolysis catalyzed by urease, mainly in the absence of buffers by use of the self-buffer effect of the products, was investigated. The effect of pH, temperature, and concentration of enzyme, substrate, product, salt ions, and buffers on the kinetic behavior of urease was examined. A kinetic model of a modified Michaelis-Menten form, incorporating substrate and product inhibition, pH dependence, and temperature effect, was developed to describe the reaction rate. Experimental data indicated that urease in a buffer-free solution was less susceptible to the inhibition of substrate product. The Michaelis constant keeps almost constant with the variation of pH and temperature, and increases with the addition of buffers and salts. The data also suggested that the noncompetitive pattern of the product inhibition, which is not significantly affected by temperature, increases gently with increasing pH. A Monod form rate expression was proposed to analyze the pH effect on the maximum rate. The proposed kinetic model was also examined by the long-time experiments in which pH, substrate, and product concentration varied obviously during the reaction course.