综合传动装置起动扭矩测试试验研究

低温环境起动性能是表征车辆动力性能的一项重要指标。对液力机械传动车辆而言,由于综合传动装置自身技术特点,改善车辆起动性能除应当考虑发动机自身起动阻力外,还应当考虑综合传动装置的起动阻力。在系统分析综合传动装置技术特点和功率流向的基础上,总结了发动机起动过程的主要特征,提出采用稳态试验与动态试验相结合的台架试验方法进行综合传动装置起动扭矩测试。以某高速履带车辆为研究对象,进行了综合传动装置起动扭矩测试。试验结果表明,传动油温的变化和各类油泵的功率消耗是决定综合传动装置起动扭矩大小的关键因素,为改进车辆总体设计和提高车辆起动性能提供了依据。     

基于阿秒抖动光纤锁模激光器的时钟同步

光纤锁模激光器结构简单, 运转稳定, 且输出的超短脉冲序列具有极高的时钟稳定性, 在抽运探测、脉冲相干合成等要求高精度时钟同步的前沿领域有着广阔的应用前景. 本文通过激光器腔内的电光调制器进行反馈控制, 实现了两台光纤锁模激光器之间的紧密时钟信号同步; 并且通过平衡光学互相关方法, 对残余的时钟误差信号进行了测量, 分辨率达到了13 as. 通过优化激光器的腔内动力学过程及反馈环路的参数, 在[1 Hz, 10 MHz]的积分区间内得到了109 as的残余时钟误差, 对应单台激光器的平均时间抖动为77 as.     

奥氏体不锈钢深冷低温冲击试验方法研究

以液氦作为冷源,结合G-M低温制冷机,实现-196~-269℃深冷温度环境,探索深冷低温冲击试验方法。结果表明,试样从低温环境中取出后置于大气环境中,温度出现快速回升。对于不同试验低温,可采用不同方法进行试验。试验温度T=4.2K时,可采用制冷机预冷+液氦持续喷淋的方法进行降温。试验温度10≤T77K时,可采用玻璃容器填充气凝胶粉体对试样进行绝热保温处理;或根据试验温度以及回温测试结果,以一定的过冷温度补偿值保证试验温度。过冷温度补偿方法可满足常规冲击试验的要求,但需要相对较大的过冷温度补偿值;玻璃容器填充粉体包裹试样,可减缓试样温度回升,但对材料冲击吸收能量有一定影响,可用多试样冲击试验并进行修正以反映材料冲击韧性水平。     

微通道换热器复合翅片的传热特性研究

研究了管径对微通道换热器传热性能的影响,并在百叶窗翅片的基础上开发了两种复合翅片。计算结果表明:在同一迎面风速下,1mm管径的百叶窗翅片Nu数分别比1.5mm和1.8mm管径的大4.8%~10.5%和24.6%~25.8%。JF值增加11%~15%和26%~28%,说明管径为1mm时微通道换热器的综合性能更好。与百叶窗翅片相比,百叶窗-三角翼复合翅片的换热系数减小1.9%~5.4%,但压降降低7.8%~12.7%,表明复合翅片是一种高效低阻翅片。     

飞秒激光参数对三态阶跃型分子Autler-Townes分裂的影响

利用三态模型和含时波包法, 研究了K₂分子在强飞秒泵浦-探测激光场中泵浦/探测场强、波长对光电子能谱Autler-Townes(AT)分裂的影响．通过分别改变两激光场的场强或者波长预测AT峰移和间距,并且首次量化了AT分裂的峰移和间距．光电子能谱在共振时显示为对称双峰,失谐时为非对称双峰。AT分裂间距随泵浦场强增大而增大,但不因探测场强改变而改变．     

Dynamically assisted pair production for scalar QED by two fields

By solving the quantum Vlasov equation, the dynamically assisted pair production for scalar quantum electrodynamics (QED) is investigated. It is verified that this mechanism still holds true for boson pair production. Two combinations of two electric fields having different time scales under various time delays are considered; it is found that the oscillations of the momentum spectrum and the number density of created bosons decrease with increasing time delay, and the latter has a maximum value when the time delay equals zero. Furthermore, the differences in vacuum pair production between bosons and fermions are also studied, and they are helpful for distinguishing the created bosons from fermions.     

Trends in ultrashort and ultrahigh power laser pulses based on optical parametric chirped pulse amplification

Since the proof-of-principle demonstration of optical parametric amplification to efficiently amplify chirped laser pulses in 1992,optical parametric chirped pulse amplification(OPCPA)became the most promising method for the amplification of broadband optical pulses.In the meantime,we are witnessing an exciting progress in the development of powerful and ultrashort pulse laser systems that employ chirped pulse parametric amplifiers.The output power and pulse duration of these systems have ranged from a few gigawatts to hundreds of terawatts with a potential of tens of petawatts power level.Meanwhile,the output pulse duration based on optical parametric amplification has entered the range of fewoptical-cycle field.In this paper,we overview the basic principles,trends in development,and current state of the ultrashort and laser systems based on OPCPA,respectively.     

A Novel L‐Cysteine Electrochemical Sensor Using Sulfonated Graphene‐poly(3,4‐Ethylenedioxythiophene) Composite Film Decorated with Gold Nanoparticles

By exploiting the electrostatic interaction between positively charged 3,4‐ethylenedioxythiophene cation radicals and negatively charged sulfonated graphene (SG) sheets, we prepared a poly(3,4‐ethylenedioxythiophene)‐sulfonated graphene (SG‐PEDOT) composite film by a one‐step electrochemical process. The composite was further decorated with gold nanoparticles (AuNPs) and employed as an electrode material for the detection of L ‐cysteine (Cys). The SG‐PEDOT composite film is shown to provide a rough surface for the electrodeposition of AuNPs and to improve substrate accessibility and interaction with Cys. Moreover, the AuNPs‐decorated composite exhibits better electrocatalytic performance than that of a SG‐PEDOT composite only. Under optimum experimental conditions, the amperometric current of the sensor is linearly related to the concentration of Cys in the 0.1 to 382 µM range, and the detection limit is 0.02 µM (at S/N=3). The modified electrode displays favorable selectivity, good stability and high reproducibility. The method was successfully applied to the detection of Cys in spiked human urine.