Tandem Molecular Self‐Assembly in Liver Cancer Cells

We herein describe the tandem molecular self‐assembly of a peptide derivative ( 1 ) that is controlled by a combination of enzymatic and chemical reactions. In phosphate‐buffered saline (PBS), compound 1 self‐assembles first into nanoparticles by phosphatase and then into nanofibers by glutathione. Liver cancer cells exhibit higher concentrations of both phosphatase and GSH than normal cells. Therefore, the tandem self‐assembly of 1 also occurs in the liver cancer cell lines HepG2 and QGY7703; compound 1 first forms nanoparticles around the cells and then forms nanofibers inside the cells. Owing to this self‐assembly mechanism, compound 1 exhibits large ratios for cellular uptake and inhibition of cell viability between liver cancer cells and normal liver cells. We envision that using both extracellular and intracellular reactions to trigger tandem molecular self‐assembly could lead to the development of supramolecular nanomaterials with improved performance in cancer diagnostics and therapy.     

蔡司Axio Scan.Z1全自动数字玻片扫描系统的应用

全自动切片扫描技术优势大，应用范围广，已逐步成为形态学和病理学研究的一种变革性辅助手段。本文介绍了蔡司Axio Scan.Z1切片扫描系统的配置参数（光学系统、物镜、分辨率、扫描速度、相机等）和成像特点，阐述了蔡司Axio Scan.Z1在大批量全组织扫描、组织病理学、神经生物学等研究领域的重要应用。总结了仪器在使用过程中遇到的问题，分析了原因并提出解决方案，为科研工作提供更好的共享服务。     

Polymer brushes grafted from graphene via bioinspired polydopamine chemistry and activators regenerated by electron transfer atom transfer radical polymerization

Polymer brushes decorated reduced GO (rGO) with advanced applications have been prepared by bioinspired polydopamine (PDA) chemistry integrated with activators regenerated by electron transfer atom transfer radical polymerization (ARGET‐ATRP) technique. First, rGO/PDA was obtained by the process for graphene oxide (GO) coated with a homogeneous bio‐adhesive PDA layer. Then the initiator 2‐bromoisobutyryl bromide (BIBB) was immobilized on the surface of PDA functionalized rGO. Finally, rGO/PDA‐Br was polymerized with N, N‐diethylaminoethyl methacrylate (DEAEMA) and glycidyl methacrylate (GMA) to obtain rGO/PDA‐g‐polymer brushes by ARGET‐ATRP process. The prepared rGO/PDA‐g‐PGMA brush would be subjected to further functionalization with ethylenediamine (EDA), which would impart the obtained products (rGO/PDA‐g‐PGMA‐NH₂) with good adsorption ability toward cationic dyes. The chemical structures and morphologies of the functionalized GO products have been characterized in detail by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, thermal gravimetric analysis (TGA), scanning electron microscope (SEM), transmission electron microscope(TEM), and atomic force microscopy (AFM). The distinctive pH‐responsive character of rGO/PDA‐g‐PDEAEMA and adsorption ability of rGO/PDA‐g‐PGMA‐NH₂ for cationic dyes have been explored by UV–vis spectrophotometer. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 689–698     

Critical exponents in a degenerate parabolic equation with weighted source

This article deals with the Fujita-type theorems to the Cauchy problem of degenerate parabolic equation not in divergence form with weighted source u _t ?=?u ^p Δu?+?a(x)u ^q in ? ⁿ ?×?(0,?T), where p?≥?1, q?>?1, and the positive weight function a(x) is of the order |x| ^m with m?>??2. It was known that for the degenerate diffusion equation in divergence form, the weight function affects both of the critical Fujita exponent and the second critical exponent (describing the critical smallness of initial data required by global solutions via the decay rates of the initial data at space-infinity). Contrarily, it is interesting to prove that the weight function in the present model with degenerate diffusion not in divergence form influences the second critical exponent only, without changing the critical Fujita exponent.     

Direct synthesis of hydrogen peroxide from H2/O2 using Pd/Al2O3 catalysts

Pd/Al₂O₃ catalysts were prepared by the impregnation method and were used for the direct formation of hydrogen peroxide from H₂ and O₂. The H₂O₂ concentration and selectivity were strongly dependent on the solubility of hydrogen in the reaction medium. The modification of the support by halogenate has a beneficial effect on the selectivity. The state of the active Pd on Pd/Al₂O₃ catalysts was studied using X-ray photoelectron spectroscopy, and Pd(0) was found to be active.     

Selective solvent annealing induced phase separation and dewetting in PMMA/SAN blend ultrathin films

Phase behaviors induced by solvent annealing in poly(methyl methacrylate) (PMMA) and poly(styrene‐ran‐acrylonitrile) (SAN) blend ultrathin films have been investigated by atomic force microscopy and grazing incidence small‐angle X‐ray scattering. Our results indicate that both the phase separation within the blend and the dewetting of the film induced by composition fluctuation take place upon the selective solvent annealing, producing complex structures containing upper droplets (of one phase) and mimic‐films (of the other rich‐phase). The use of acetic acid (the selective solvent for PMMA) generates PMMA mimic‐film and SAN droplets, while the introduction of DMF (exhibiting better solubility for SAN) vapor results in the formation of SAN mimic‐film and PMMA droplets. Essentially, the interaction at polymer/substrate interface, resultant wettability of selected component, solubility of PMMA and SAN in adopted solvent dominate not only the phase separation and the dewetting of the whole film but also the synergism of them. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1243–1251     

Molecularly imprinted polypyrrole nanonecklaces for detection of herbicide through molecular recognition-amplifying current response

Molecularly imprinted polypyrrole (PPy) nanonecklaces were facilely synthesized through a two-step oxidative polymerization route for the amperometric detection of non-electrochemically active herbicide. It has been demonstrated that dissolved oxygen can preoxidize pyrrole to form PPy oligomer bundles, which further self-assemble into necklace-like micelles in the presence of cetyltrimethylammonium bromide. Subsequently, these microstructures were immediately gelled through quick polymerization of residual pyrrole monomers, leading to the formation of PPy nanonecklaces. Meanwhile, herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) was synchronously imprinted into the formed PPy and highly dense imprinted sites were generated in PPy nanonecklaces because the necklace-like structure with microgaps/pores provides the facile and complete removal of templates. The imprinted nanonecklaces exhibit the high capacity and fast kinetics to uptake 2,4-D molecules, and produce a imprinting factor of ∼4.2. Importantly, the recognition and binding to 2,4-D significantly amplify the current response by a factor of 8 times in amperometric measurements, providing a sensitive detection of 2,4-D. The molecular imprinting strategy opens a novel avenue to the direct detection of non-electrochemically active species in a more convenient, simpler and cheaper way than the traditional competition-displacing approaches.     

Fast co-pyrolysis of coal and biomass in a fluidized-bed reactor

Co-pyrolysis is one of the most promising options for the utilization of coal and biomass. Coal/biomass blends were prepared using Yilan subbituminous (YL) and corncob and the mass ratios of coal in mixtures varied between 0 and 100 %. Co-pyrolysis characteristics were investigated in a thermogravimetric analyzer from 303 to 973 K under the nitrogen flow of 100 mL min^?1. The co-pyrolysis residues were less than the sum simply added of the solid yields of individuals. With heating rate increased from 10 to 40 K min^?1, the residues decreased more severely compared to the expected under various blending ratios. For fast pyrolysis in fluidized-bed reactor, gas volumes and char yields of co-pyrolysis showed a significant linearity. But pyrolysis-oil yields were higher than the expected from the additive model when the YL blending ratios were less than 60 %. The co-pyrolysis evolved more H₂, CH₄, C₂ + C₃, and less CO than an additive pyrolysis process of individual fuel. The GC/MS results indicated that co-pyrolysis-oil contained more alcohols, ketones, aldehydes, or acids than that of individual fuel. All of that suggested the H/OH in volatiles produced from rapid pyrolysis of biomass transferred to the radicals of coal pyrolysis. The possible reaction mechanism also was provided in the paper.     

对硝基邻苯二乙醚合成技术研究

以邻苯二酚与溴乙烷为原料、聚乙二醇为相转移催化剂合成邻苯二乙醚,再经过冰醋酸和硝酸硝化得到对硝基邻苯二乙醚。研究了反应温度、反应时间、原料摩尔比和催化剂用量等对反应收率的影响,获得了合成邻苯二乙醚的优化工艺条件:n(C6H4(OH)2)∶n(NaO H)∶n(C2H5Br)=1∶2.6∶2.4,反应温度80℃,反应时间4h,催化剂用量2g,该反应条件下邻苯二乙醚平均收率88%。混酸硝化条件下合成对硝基邻苯二乙醚的较佳工艺条件为n(C10H14O2)∶n(HNO3)=1∶1.2,乙酸25mL,反应时间30min,反应温度20℃,该反应条件下对硝基邻苯二乙醚平均收率为99%。