Analysis on high speed response of a uni-traveling-carrier double hetero-junction phototransistor

In this paper, the positive influence of a uni-traveling-carrier(UTC) structure to ease the contract between the responsivity and working speed of the In P-based double hetero-junction phototransistor(DHPT) is illustrated in detail. Different results under electrical bias, optical bias or combined electrical and optical bias are analyzed for an excellent UTC-DHPT performance. The results show that when the UTC-DHPT operates at three-terminal(3T) working mode with combined electrical bias and optical bias in base, it keeps a high optical responsivity of 34.72 A/W and the highest optical transition frequency of 120 GHz. The current gain of the 3T UTC-DHPT under 1.55-μm light illuminations reaches 62 d B. This indicates that the combined base electrical bias and optical bias of 3T UTC-DHPT can make sure that the UTC-DHPT provides high optical current gain and high optical transition frequency simultaneously.     

有限厚度板穿透裂纹前缘附近三维弹性应力场分析

通过三维有限元计算来研究有限宽度、有限厚度含有穿透裂纹板的裂纹前缘应力场，从中找出应力强度因子与板的厚度、裂纹长度之间的关系，同时还分析了裂尖的三维约束程度和三维约束区的大小。分析结果表明：应力强度因子沿厚度的分布是不均匀的，应力强度因子的最大值及其位置与厚度有关；有限厚度板中面应力强度因子(KI)m-p及最大应力强度因子(KI)max均大于平面应力或平面应变的应力强度因子。对有限厚度裂纹问题，按平面应力或平面应变来考虑是不安全的；板中面的应力强度因子(KI)m-p及最大应力强度因子(KI)max是厚度B／a的函数；板的中面离面约束系数Tx最大，自由面(z=B)Tx=0。沿厚度方向裂尖附近的离面约束系数Tx也是z／B和B／a的函数，随着厚度的增加离面约束系数Tx增大，离中面越近离面约束系数Tx越大。Tx随着x的增大急剧减小，三维约束影响区域大小大约为板厚的一半，且裂纹长度a／W对应力强度因子沿厚度变化规律及Tx影响区域大小影响较小。     

On the Three Phase Mixtures in Martensitic Transformations of Shape Memory Alloys: Thermodynamical Modeling and Characteristic Temperatures

We study here the thermally-induced martensitic transformation process of shape memory alloys. Taking the internal energy of phase mixtures as the potential function and introducing coherency energies between martensite and austenite and between different variants of the martensitic phase, we are able to use thermodynamical arguments to obtain hysteresis diagrams which could be measured experimentally. The characteristic temperatures for martensitic transformation, (martensite start and finish) and (austenite start and finish) can be identified explicitly and are closely related to the coherency parameters of the coherency energies. Received September 12, 1997     

EXTENSION OF POINCARÉ’S NONLINEAR OSCILLATION THEORY TO CONTINUUM MECHANICS (Ⅱ)-APPLICATIONS

This is a continuation of [1]. In [1] we suggested a method of direct perturbation of partial differential equation and weighted integration to calculate the periodic solution for continuum mechanics. In this paper, by using the above method we calculate the resonant and nonresonant periodic solutions of beam with fixed span and different boundary conditions and the resonant periodic solution of square plate under the action of concentrated periodic load. Besides, the influences of nonprincipal mode upon periodic solution and of static load upon amplitudefrequency curve are given.     

Studies on electro‐optical properties of polymer matrix/LC/ITO nanoparticles composites

In this paper, polymer‐dispersed liquid crystal (PDLC) films consisting of liquid crystal (LC)/monomers/indium tin oxide (ITO) nanoparticles with good near‐infrared absorption property had been fabricated, and the influence of the ITO nanoparticles modified with 3‐methacryloxypropyltrimethoxysilane (KH570) on the PDLC films was systematically studied. First, different liquid crystal content was studied to obtain PDLC films with good electro‐optical properties. And then, various weight ratio of ITO nanoparticles was added to samples. While the content of ITO nanoparticles was increased, the saturation voltage increased and the CR decreased. Though the electro‐optical properties of PDLC samples reduced with the addition ITO nanoparticles, the near‐infrared absorption property of films was enhanced.     

三聚氰胺和对苯二氧乙酸共晶中的三维氢键网络

合成了一个新的超分子聚合物{(MAH+)2(p-BDOA2-)·4H2O}n(MA=三聚氰胺;p-BDOAH2=对苯二氧乙酸),通过X-射线对其结构进行了表征。在该聚合物中,三聚氰胺被质子化,相邻的三聚氰胺分子通过氢键形成一维阳离子链(MAH+)n,相邻的阳离子链由p-BDOA2-阴离子连接构成波浪状的二维层,层状结构通过水分子的氢键和π-π堆积形成三维结构。     

Facile synthesis and luminescence properties of europium(III)-doped silica nanotubes

Photoluminescent nanomaterials had emerged as an amazing field in a wide range of applications during the past few decades. In this article, fibrous europium tartrates and photoluminescent silica nanotubes were conveniently synthesized by using sol–gel method, in which europium ions entered silica matrix. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction analysis, fourier transform infrared spectra, energy-dispersive X-ray spectroscopy and photoluminescence (PL) spectra analysis were used to characterize the growth, structure, morphology and optical property of the products. The results indicated that europium tartrates nanofibers as a template can transform tetraethylorthosilicate into silica nanotubes effectively. Meanwhile, europium(III) was transferred from the fibers to the tubes successfully. A hard template mechanism was proposed to explain the formation process of europium(III)-doped silica nanotubes. Moreover, different morphologies of silica-based nanomaterials were obtained due to varying NH₄OH addition or stirring time. PL spectra from nanofiber and nanotube show a typical emission of europium(III), and 13 % is the quenching concentration of europium(III) in silica matrix for this system. The novel silica nanotubes can be applied potentially in optical and biological areas.     

A polyacrylamide gel route to different-sized CaTiO3 nanoparticles and their photocatalytic activity for dye degradation

Calcium titanate (CaTiO₃) nanoparticles with different average sizes were prepared by a polyacrylamide gel route, where the particle size was tailored by using different chelating agents. Scanning electron microscope observation shows that the samples prepared by using the chelating agents EDTA, acetic acid, tartaric acid, and citric acid have an average particle size of 25, 33, 36, and 55 nm, respectively. All the particles are regularly shaped like spheres. The bandgap energy of the four samples is measured to be 3.66–3.59 eV by ultraviolet (UV)–visible diffuse reflectance spectroscopy. The photocatalytic activity of the prepared CaTiO₃ samples was evaluated by the degradation of methyl orange under 254 nm UV irradiation, revealing that they exhibit a good photocatalytic activity. Hydroxyl radicals are revealed, by the photoluminescence technique using terephthalic acid as a probe molecule, to be produced on the irradiated CaTiO₃ nanoparticles and suggested to be the primary active species toward the dye degradation.     

Fluorine‐Doped Porous Single‐Crystal Rutile TiO2 Nanorods for Enhancing Photoelectrochemical Water Splitting

Fluorine‐doped hierarchical porous single‐crystal rutile TiO₂ nanorods have been synthesized through a silica template method, in which F^? ions acts as both n‐type dopants and capping agents to make the isotropic growth of the nanorods. The combination of high crystallinity, abundant surface reactive sites, large porosity, and improved electronic conductivity leads to an excellent photoelectrochemical activity. The photoanode made of F‐doped porous single crystals displays a remarkably enhanced solar‐to‐hydrogen conversion efficiency (≈0.35 % at ?0.33 V vs. Ag/AgCl) under 100 mW cm^?2 of AM=1.5 solar simulator illumination that is ten times of the pristine solid TiO₂ single crystals.     

Palladium Nanoparticles Bonded to Two‐Dimensional Iron Oxide Graphene Nanosheets: A Synergistic and Highly Reusable Catalyst for the Tsuji–Trost Reaction in Water and Air

Low cost, high activity and selectivity, convenient separation, and increased reusability are the main requirements for noble‐metal‐nanocatalyst‐catalyzed reactions. Despite tremendous efforts, developing noble‐metal nanocatalysts to meet the above requirements remains a significant challenge. Here we present a general strategy for the preparation of strongly coupled Fe₃O₄ and palladium nanoparticles (PdNPs) to graphene sheets by employing polyethyleneimine as the coupling linker. Transmission electron microscopic images show that Pd and Fe₃O₄ nanoparticles are highly dispersed on the graphene surface, and the mean particle size of Pd is around 3 nm. This nanocatalyst exhibits synergistic catalysis by Pd nanoparticles supported on reduced graphene oxide (rGO) and a tertiary amine of polyethyleneimine (Pd/Fe₃O₄/PEI/rGO) for the Tsuji–Trost reaction in water and air. For example, the reaction of ethyl acetoacetate with allyl ethyl carbonate afforded the allylated product in more than 99 % isolated yield, and the turnover frequency reached 2200 h^?1. The yield of allylated products was 66 % for Pd/rGO without polyethyleneimine. The catalyst could be readily recycled by a magnet and reused more than 30 times without appreciable loss of activity. In addition, only about 7.5 % of Pd species leached off after 20 cycles, thus rendering this catalyst safer for the environment.