The synthesis and reactins of ortho bromophenyllithium

Experimental conditions have now been developed whereby o-bromophenyllithium(II) may be prepared in excellent yields and used as an organometallic intermediate for the synthesis of a variety of ortho bromo substituted phenyl compounds (o-BrC₆H₄X). THe thermal stability, decomposition products and reactions of II wre studied. REactions between II and a variety of substrates, e.g., CO₂, dimethylformamide, fluorinated esters, hexafluorobenzene, and organosilicon chlorides were examined.     

Facile cyclic ammonium salt with the smallest size for high performance electric double layer capacitors

A novel cyclic ammonium salt, N,N-dimethylpyrrolidinium tetrafluoroborate (P₁₁-BF₄), was successfully synthesized for the first time. The smallest cyclic structure of P₁₁-BF₄ induced high solubility and conductivity in PC, which can easier enter the micropores of activated carbon and occupy more surface area during charge/discharge process.     

脉冲激光光声量热装置的研制及用之对香豆素激光染料无辐射跃迁过程的研究

本文报道了一套适用于液相体系的高灵敏度脉冲激光光声量热装置的建立。用此仪器对香豆素激光染料C428, C47和C120的无辐射过程进行了研究, 测得它们在无水乙醇中的无辐射跃迁量子产额分别为0.50, 0.47和0.38。     

新型大环醚的合成——1,7-N,N′双取代-1,7-二氮-4,10,13-三氧环十五烷的合成

我们曾报道1,10-N,N’-双取代-1,10-二氮-4,7,13,16-四氧环十八烷(1)及1,7-N,N’-双取代-1,7-二氮-4,10-二氧环十二烷(2)二类大环聚醚的合成及其对碱金属离子的络合性能。     

Diastereoselective Three Component Reaction of N‐Glyoxyloyl Camphorpyrazolidinone,Amine and Allyltributylstannane: Facile Synthesis of Homoallylic Amines

Diastereoselective allylation of imine derived from N‐glyoxyloyl camphorpyrazolidinone and amines was treated with allyltributylstannane in the presence of triflic acid. The corresponding optically enriched homoallylic amines were obtained in reasonable to high material yields and with practical levels of stereoselectivity in 10 min at ambient temperature.     

Studies on fluorenscence resonance energy transfer between CdS nanoparticles and DOCAI dyes

The water-soluble CdS nanoparticles were synthesized in aqueous solution. A novel fluorescence resonance energy transfer (FRET) system with CdS nanoparticles as energy donors and 3,30-diethyl-oxadicarbocyanine iodide (DOCAI) dyes as energy accepter has been developed.     

氯化钠在球形纳米氧化铈形成过程中的作用

以水合碳酸铈为原料, 以氯化钠作为助磨剂和阻聚剂, 采用机械活化法制备了球形纳米氧化铈, 用XRD法研究了水合碳酸铈与氯化钠质量比、球磨时间、煅烧温度对CeO2粉体晶粒度的影响, 用TEM对最终产物粒子进行形貌观察. 结果表明: 在碳酸铈的球磨过程及其随后的煅烧过程中, 氯化钠的存在起到了很好的助磨和阻聚作用, 所得CeO2为类球形粒子, 分散性较好, 晶粒度约为30～50 nm.     

辣根过氧化物酶活性膜结构及生物电催化性能

通过分子沉积法研究了在聚对苯二甲酸乙二醇酯（PET）表面及金电极表面组装辣根过氧化物酶（HRP）/聚对苯乙烯磺酸钠（PSS）多层生物活性膜，用原子力显微镜(AFM)研究了组装膜的表面形貌，并研究了组装膜的形貌、粗糙度和活性关系.应用循环伏安法（CV）研究了组装HRP膜后电极对H2O2的电化学催化还原作用.实验发现，采用亚甲基蓝（MB）溶液为介质，在H2O2浓度为0.2～5.0 mmol•L－1时，其响应电流对H2O2浓度变化基本呈线性.     

Designed nanostructured pt film for electrocatalytic activities by underpotential deposition combined chemical replacement techniques

Multiple-deposited Pt overlayer modified Pt nanoparticle (MD-Pt overlayer/PtNPs) films were deliberately constructed on glassy carbon electrodes through alternately multiple underpotential deposition (UPD) of Ag followed redox replacement reaction by Pt (II) cations. The linear and regular growth of the films characterized by cyclic voltammetry was observed. Atomic force spectroscopy (AFM) provides the surface morphology of the nanostructured Pt films. Rotating disk electrode (RDE) voltammetry and rotating ring-disk electrode (RRDE) voltammetry demonstrate that the MD-Pt overlayer/PtNPs films can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated 0.1 M H(2)SO(4). Thus-prepared Pt films behave as novel nanostructured electrocatalysts for dioxygen reduction and hydrogen evolution reaction (HER) with enhanced electrocatalytic activities, in terms of both reduction peak potential and peak current, when compared to that of the bulk polycrystalline Pt electrode. Additionally, it is noted that after multiple replacement cycles, the electrocatalytic activities improved remarkably, although the increased amount of Pt is very low in comparison to that of pre-modified PtNPs due to the intrinsic feature of the UPD-redox replacement technique. In other words, the electrocatalytic activities could be improved markedly without using very much Pt by the technique of tailoring the catalytic surface. These features may provide an interesting way to produce Pt catalysts with a reliable catalytic performance as well as a reduction in cost.