Van der Pauw Hall Measurement on Intended Doped ZnO Films for p-Type Conductivity

A Van der Pauw Hall measurement is performed on the intended doped ZnO films （Na doped ZnO） grown by using the molecular beam epitaxial method. All as-grown samples show n-type conductivity, whereas the annealed samples （annealing temperature 900℃） show ambiguous carrier conductivity type （n- and p-type） in the automatic Van der Pauw Hall measurement. A similar result has been observed in Li doped ZnO and in as-doped ZnO films by other groups before. However, by tracing the Hall voltage in the Van der Pauw Hall measurement, it is found that this alternative appearance of both n- and p-type conductivity is not intrinsic behavior of the intended doped ZnO films, but is due to the persistent photoconductivity effect in ZnO. The persistent photoconductivity effect would strongly affect the accurate determination of the carrier conductivity type of a highly resistive intended doped ZnO sample.     

一种基于声相似律的旋转流体机械噪声声源分离方法

针对管道系统中的流体机械发声问题,提出了一种声源函数与声响应函数的频谱分离方法。该方法以声相似律为基础,分别采用最小均方值多重线性回归方法和高斯滤波获得声源函数和声响应函数。通过算例验证了该方法的有效性,辨识得到的声源函数和声响应函数的相对误差均远小于现有方法。利用该方法分析了自由空间和带管道两种安装条件下轴流风扇的辐射噪声,辨识得到了相应的声源函数、声响应函数和叶尖速度律指数,并对风扇的主要噪声成分进行了分析。     

基于Vega的红外图像仿真

介绍了红外成像仿真的基本理论,讨论了利用Vega传感器模块将输入的可见目标图像生成红外图像的技术。该技术使用Creator软件进行三维几何建模和纹理映射,使用TMM软件进行红外材质建模;然后,用Mat软件进行大气衰减的计算;最后,用SensorWorks软件进行传感器特性建模,通过光电转换生成红外图像。以阿帕奇AH6直升机为例进行了红外图像仿真,结果表明,利用Vega传感器模块进行传感器建模,建模效果较好,成本低,易于工程实现。     

几种吊钩中的力学问题探析

对吊装机械中使用的几种吊钩在吊装重物时的受力情况进行分析和比较,说明了各自的特点及其应用.     

干涉式光纤陀螺光路系统的物理模型

光路系统的偏振误差极大地制约着光纤陀螺精度的提高。利用相干矩阵和琼斯矩阵对光纤陀螺中光学器件和熔接点的光学参数进行描述,建立了干涉式光纤陀螺光路系统的物理模型。与之前相关文献报道相比,该模型所表达的光路系统更加接近于工程实际。在此基础上,提出一种分析光学器件和熔接点缺陷,以及光路损耗对光纤陀螺偏振误差影响的新方法。该方法可以有效地分析光路系统缺陷对零偏和标度因数的影响,在工程上可作为评价干涉式光纤陀螺光路系统性能的一个途径。     

无线激光通信在高速视频传输中的应用

利用无线激光通信传输速率高的优势,设计并实现了一套622Mbps视频传输系统。将视频转换、数据处理、激光收发等功能集中在单块电路板上,提高了灵活性。使用片内异步先进先出队列（FIFO）组成乒乓操作,对连续视频数据流进行有效切换控制。采用曼彻斯特编码较好地从接收信号中恢复出数据和时钟,有利于接收串行数据流的边界检测和同步。实验表明,本系统可以稳定地传输视频,满足地面距离应用的需要,为进一步研究激光通信各项技术提供了平台。     

Vector meson rescattering effect in understanding the threshold enhancement observed in J/ψ→γp(p)

We propose one possible mechanism,i.e.,the vector meson(VV)rescattering effects,to interpret the near threshold narrow enhancement observed in J/ψ→γp(p).The estimate indicates that these effects can give sizeable contributions to this channel,and a destructive interference between different rescattering amplitudes is required to reproduce the line shape of the data.     

Anisotropic flow at RHIC

STAR’s measurement of directed flow for pions,kaons(K 0 S ),protons and anti-protons,for Au+Au collisions at 200 GeV obtained in Run7 are presented,as well as elliptic flow for identified particles measured in Au+Au(Run7) and Cu+Cu(Run5) collisions.It is found that the slope of proton v 1 (y) at midrapidity is extremely small.Elliptic flow results are compared to Hydro calculation and the discrepancy is discussed.     

300～1100nm多波段成像光学系统设计及杂光分析

设计了一套300～1100nm多波段光学系统,该系统能对目标的近紫外、可见光和近红外3个波段同时成像,可满足目标多波段信息探测的要求。由于在光学系统中镜筒内壁反射和棱镜表面反射会产生杂光和鬼像,因此,利用Light—Tools软件对此系统的杂光和鬼像进行了模拟分析。模拟结果表明,视场之外11．7—18．3°和-11．7～-18．3°的入射光线被胶合棱镜上下表面反射后,会聚焦到3个探测器靶面范围内,形成鬼像;6．2°-9．8°和一6．2°--9．8°的入射光线被镜筒反射后会在3个探测器上形成杂光。利用设计的多波段光学系统进行了相关实验,结果证明了模拟分析的正确性,表明此分析能用于指导多波段光学系统的设计和研制。提出了减少杂光和鬼像的相应措施,实验结果验证了提出的措施能够减少杂光及消除鬼像,提高系统成像质量。     

Study of a bulk-Micromegas with a resistive anode

The design and performance of a Micromegas with a resistive anode are presented in this paper. A thin resistive sheet with volume resistivity of 10¹² Ω·m cm is glued onto the readout electrode surface and its performance is investigated by using a ⁵⁵Fe X-ray radioactive source in the operation gas of argon and isobutene mixtures (Ar/Iso=95/5). The gas gain at different mesh high voltage, counting rate and working time are given. Energy spectra at different working voltages are measured and the results are discussed. We have oberved that a Micromegas with a resistive anode can be operated at higer gain than a standard Micromegas without sparks.