镜象电流选择的唯一性

利用稳恒磁场边值问题解答的唯一性定量和维尔斯特拉斯定理讨论了镜象电流选择的唯一性。     

在线单模光纤偏振控制器研究

利用Ｐｏｉｎｃａｒｅ球理论首次全面分析了在线全光纤偏振控制器。结果发现该偏振器可以有八种不同路径，实现任意偏振态之间的转化，最后通过实验验证了其工作性能。     

2，5─哌嗪二酮与α，β─不饱和醛反应研究

综合运用了多种波谱学方法及化学手段确证并归属了２，５－哌嗪二酮与α，β－不饱和醛在超声波分散金属钾及双季铵盐作用下反应产物的立体化学与核磁共振信号，为研究这个反应提供了有用的信息．     

Novel Image Optimization Method for Joint Photoacoustic Tomography

The distribution of speed of sound （SOS） in biomedical tissue and delay compensation （DC） have significant impact on the image quality of photoacoustic tomography （PAT）. When imaging human peripheral joints, using fixed SOS and DC can only ensure that the reconstructed images are focused in a limited depth range, whereas they are defoeused at other depths, which cause severe artifacts and blurring. In this work, a linear-DC based reconstruction approach is proposed to focus the whole PAT image region. It is proved by two in vivo experiments that, compared with traditional delay-and-sum back projection algorithms, the proposed method can effectively optimize the image quality of articular tissues in PAT.     

Back focal plane imaging of Tamm plasmons and their coupled emission

The unique optical properties of Tamm plasmons (TPs) – such as flexible wavevector matching conditions including inplane wavevector within the light line, and existing both S‐ and P‐polarized TPs − facilitate them for direct optical excitation. The Tamm plasmon‐coupled emission (TPCE) from a combined photonic–plasmonic structure sustaining both surface plasmons (SPs) and TPs is described in this paper. The sensitivity of TPCE to the emission wavelength and polarization is examined with back focal plane imaging and verified with the numerical calculations. The results reveal that the excited probe can couple with both TPs and SPs, resulting in surface plasmon‐coupled emission (SPCE) and TPCE, respectively. The TPCE angle is strongly dependent on the wavelength allowing for spectral resolution using different observation angles. These Tamm structures provide a new tool to control the optical emission from dye molecules and have many potential applications in fluorescence‐based sensing and imaging.     

Measurement of 129Xe frequency shift due to Cs–129Xe collisions

Enhancement factor K0, which characterizes NMR and EPR frequency shifts for Cs-129Xe, is measured for the first time. The enhancement factor r-o was measured to be （702±41） at 80 ℃ and （653±20） at 90 ℃, using the NMR frequency shift, detected by atomic magnetometer at a low magnetic field of 100 nT. This result is useful for predicting the EPR frequency shifts for Cs and the NMR frequency shifts for 129Xe in spin-exchange cells.     

Inactivation of bovine immunodeficiency virus by photodynamic therapy with HMME

To investigate the effect of photodynamic therapy (PDT) with hematoporphrin monomethyl ether (HMME) on bovine immunodeficiency virus (BIV) can provide the basis theory for photoinactivation of human immunodeficiency virus (HIV). To assess the protection of HMME-PDT on the cell line Cf2Th infected with BIVR29 by 3-(4,5)-dimethylthiahiazol-2-yl-3,5-di-phenytetrazolium bromide (MTT) with power density of 5 and 25 mW/cm2 and energy density from 0.6 to 3 J/cm<'2>. To observe the inhibition of membrane fusion using a new reporter cell line BIVE by fluorescence microscope. HMME-PDT has significant protectant effects on Cf2Th-BIVR29 with both power densities, especially in the group of high power density. Fluorescent microscope shows that there is no significant difference between the group of PDT and control, which means PDT could not inhibit the BIV-mediated membrane fusion.     

Preparation and Characterization of Chitosan-Blended Multiwalled Carbon Nanotubes

Composites comprised of chitosan (CS) and multiwalled carbon nanotubes (MWCNTs) were fabricated by milling and ultrasonication dispersion methods. Scanning electron microscopy images showed homogeneous dispersion of MWCNTs throughout the CS matrix for samples prepared by either ultrasonication or milling methods. Further, the crystallinity of the CS component was found to decrease with the addition of MWCNTs, although the decomposition temperature and the storage modulus (E′) of the samples were improved. The decomposition temperature for the composite prepared by milling was 7°C higher than that by the ultrasonication. Meanwhile, the E′ decreased relatively slowly with temperature in the dynamic mechanical analysis measurements. In addition, IR analysis implied an interaction between CS and MWCNTs, which likely originated from hydrogen bonds between the amino, hydroxyl, and carboxyl groups of the two components. Compared with the ultrasonication, milling was more effective to promote the formation of the hydrogen bonds between CS and the MWCNTs and thus enhance the thermal stability of CS.     

电机转子内部通风冷却系统的流动分析与结构改进

本文根据某电机通风冷却系统的总体流动性能分析结果,采用数值模拟方法分析了该电机转子冷却系统中形状最为复杂、流动损失最大的旋转槽道内部三维流场.采用区域分块与边界拼接方法建立网格系统,数值计算结果表明,该旋转槽道内结构存在改进空间.为减少流动的局部阻力损失,对原模型流道结构进行改进,并建立了新的三维模型.新模型数值模拟结果表明,改进后的结构可以在保证换热效果基本保持不变的情况下,大大降低槽道内部流动损失.     

原始数据中束流相关本底的分离

束流相关本底处理的不确定性是在BES/BEPC上进行R值测量的主要误差来源之一,提出从原始数据中分离出束流相关样本的新方法, 并把此样本用于调节强子产生器LUARLW的参数,以减小强子探测效率的系统误差, 提高R值的测量精度.