Interference of Transformer oil Matrices to the Internal Standards on PCB Quantification

Abstract

Polychlorinated biphenyls (PCBs) are toxic, perssstent, global environmental contaminants which were formulated as complex mixtures of congeners. Many methods have been developed in the past to analyze PCB in transformer oil samples for regulatory purposes. The most important consideration in the cleanup procedure is the ability to remove the oil from the sample matrix, since trace amount of oil will interfere with the subsequent GC-MS analysis. Electron capture detection (ECD) has been the most common method for gas chromatographic analysis of PCBs because of its high sensitivity toward halogenated compounds. ECD can also respond to some non-PCB compound resulting in biased concentrations of PCB. In this work, a two-stage cleanup method, using DMSO liquid/liquid extraction and HPLC column chromatography. has been applied to two types of transformer oil. Five internal standards have been selected to show their performance in the presence of different oil matrices. The comparison of the PCB quantification at different conditions for GC-MS and GC-ECD will be demonstrated.     

Compare study between smoothing efficiencies of epicyclic motion and orbital motion

The smoothing efficiencies of epicyclic motion and orbital motion in CCOS (computer controlled optical surfacing) were compared. CCOS polishing can smooth out mid-to-high spatial frequency errors which are smaller than tool size on optical mirrors due to the rigidity of polishing tools. The smoothing efficiencies of epicyclic motion and orbital motion with pitch lap and RC lap were compared and the result proved pitch lap with epicyclic motion smoothed ∼1.6 times faster than pitch lap with orbital motion while RC lap with epicyclic motion smoothed ∼1.85 times faster than RC lap with orbital motion.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

层叠Blumlein线多开关导通时间分散性

高介电常数陶瓷储能脉冲形成线需要用到多开关触发的层叠Blumlein线结构。从形成线波过程理论出发，分析了多开关导通时间分散性对层叠Blumlein线及其输出波形的影响。主要包括两方面影响:其一是造成输出方波脉冲的前沿和后沿均出现阶梯形畸变；其二是使得各延迟导通的平行平板Blumlein线承受过电压，容易引起陶瓷储能介质的电击穿。在不单独考虑开关电感的理想情况下，利用PSpice电路程序模拟了开关导通时间分散性对四级层叠Blumlein线的影响，模拟结果与波过程理论分析一致。为减弱这些影响，提出了可行的解决方案。     

Mesoporous chitosan‐immobilized iron tetrakis(4‐carboxyphenyl)porphyrin as a model of cytochrome P‐450 enzyme for oxidation of ethylbenzene

Mesoporous chitosan‐grafted iron tetra (4‐carboxyphenyl) porphyrin catalyst (Fe TCPP/mesp‐CTS) was prepared and investigated as a practical model for the nano‐cavity and coordinate regulation‐catalysis(CRC) function in cytochrome P‐450 enzyme. Fe TCPP/mesp‐CTS was characterized by X‐ray Diffraction (XRD), Thermogravimetry (TG), Ultraviolet–visible spectroscopy(UV‐Vis), Ultraviolet–visible– Diffuse reflectance spectroscopy (UV‐DRS), Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT‐IR), and X‐ray photoelectron spectroscopy (XPS) techniques. The catalytic activity of Fe TCPP/mesp‐CTS for ethylbenzene oxidation was investigated and it was proved to be a better catalyst than Fe TCPP/macp‐CTS based on the ethylbenzene conversion, turnover numbers(TON), and the reusability. These results are attributed to the mesocavity and CRC of amino group in Fe TCPP/mesp‐CTS. The highest ethylbenzene conversion and yields of ketone and alcohol were 24.4% and 18.2%, respectively.     

Two-Step Structure Phase Transition,Dielectric Anomalies,and Thermochromic Luminescence Behavior in a Direct Band Gap 2D Corrugated Layer Lead Chloride Hybrid of [(CH3)4N]4Pb3Cl10

A direct band gap 2D corrugated layer lead chloride hybrid, [(CH₃)₄N]₄Pb₃Cl₁₀ ( 1 ), shows analogous topology to the {Mg₃F₁₀⁴⁻}_∞ layer in Cs₄Mg₃F₁₀, and with the (CH₃)₄N⁺ cations locating in the inorganic layer voids and between the interlayers. Two reversible structural phase transitions occur in 1 at 225/210 K and 328/325 K upon heating/cooling, respectively. On going from the low- to intermediate-temperature phase, the space group changes from P2₁/c to Cmca, and the crystallographic axis perpendicular to the layers is doubled with the order–disorder transformation of (CH₃)₄N ⁺ cations between the interlayers. The intermediate- and high-temperature phases are isomorphic with similar cell parameters and packing structure; their main difference concerns the disorder degree of the (CH₃)₄N ⁺ cations between the interlayers. The two-step structural phase transitions lead to dielectric anomalies around the corresponding T_c. Interestingly, 1 shows multiband emission, originating from the recombination of exciton and emission of defects. Moreover, 1 exhibits divergent thermochromic luminescent features around the T_c on the intermediate to low temperature transition.     

Synthesis,characterization and electrocatalytic performance of a dinuclear triazenidosilver(I) complex for hydrogen production

Our group has developed a series of molecular electrocatalysts for hydrogen generation based on triazenido–metal complexes (cobalt, copper, etc.). In this paper, we first present the electrocatalytic performance of a new dinuclear silver complex, [Ag₂(L)₂], formed by the reaction of the triazenido ligand 1‐[(2‐carboxymethyl)benzene]‐3‐[(2‐methoxy)benzene]triazene (HL) with AgNO₃. At room temperature, the silver complex shows photoluminescence at 653 nm. The electrocatalytic systems based on this silver complex can afford 106.57 and 1536.36 moles of hydrogen per mole of catalyst per hour from acetic acid at an overpotential (OP) of 991.6 mV and from a neutral aqueous buffer (pH = 7.0) at an OP of 837.6 mV, respectively. Electrochemical investigations show that both silver ion and triazenido ligand play a role in determining the catalytic activities of the electrocatalytic system.