Capillary electrochromatography of three β2-agonists in human urine using a lauryl methacrylate-based monolithic column

A new method of online concentration capillary electrochromatography using a lauryl methacrylate-based monolithic column was developed for determination of three β(2)-agonists including salbutamol, procaterol, and formoterol. The separation parameters including acetonitrile concentration, running buffer pH, and concentration were evaluated. To improve the sensitivity, an online concentration method with combination of the chromatographic zone-sharpening effect and field-enhanced sample-stacking effect has been developed in which the concentration parameters including injection voltage, injection time, as well as sample matrix were systematically studied. Under the optimized conditions, baseline separation of three β(2)-agonists was achieved within 4 min. When compared to the conventional sample injection, this online concentration technique increased their corresponding sensitivities up to 45-, 36-, and 320-fold, respectively. Furthermore, good repeatability was obtained with relative standard deviations (RSDs) for migration times within 0.84% and those for peak areas less than 6.35% (n = 5) in the experiment. The proposed method was successfully applied to the determination of above-mentioned β(2)-agonists in urine sample. The recoveries of spiked urine samples were between 82.4% and 109.1% with RSDs less than 9.97%.     

Novel ring B abeo-sterols as growth inhibitors of Mycobacterium tuberculosis isolated from a Caribbean Sea sponge, Svenzea zeai

Assay-guided fractionation of a moderately strong anti-tubercular extract obtained from the Caribbean Sea sponge Svenzea zeai afforded two novel 5(6 → 7)abeo-sterols, named parguesterols A (1) and B (2), as its active components. Their structures were elucidated on the basis of extensive spectroscopic analysis.     

Layer-by-layer assembly of single-charged ions with a rigid polyampholyte

A novel method to produce multilayer films has been developed by layer-by-layer assembly of single-charged ions and a rigid polyampholyte containing unbalanced charges in each of its repeat units.     

High-performance thin-layer chromatographic analysis of selected organophosphorous pesticide residues in tea

The separation of 9 organophosphates (monocrotophos, quinalphos, triazophos, parathion-methyl, isofenphos-methyl, temephos, parathion, phoxim-ethyl, and chlorpyrifos) by high-performance thin-layer chromatography (HPTLC) with automated multiple development was studied. The HPTLC method was developed and validated for analysis of residues of phoxim-ethyl and chlorpyrifos in tea. The sample was extracted with acetonitrile and cleaned up by ENVI-CARB solid-phase extraction. The extract was directly applied as bands to glass-backed silica gel 60F254 HPTLC plates. The plates were developed with dichloromethane-hexane (1 + 1, v/v) in a glass twin-trough chamber. Evaluation of the developed HPTLC plates was performed densitometrically. The results indicated that the detection limits of phoxim and chlorpyrifos were 5.0 x 10(-9) and 1.0 x 10(-8) g, respectively. Recoveries of the pesticides from tea by this analytical method were 90.7-105.5%, and relative standard deviations were 7.3-13.5%. The precision and accuracy of the method were generally satisfactory for analysis of pesticide residues in tea.     

Synthesis and characterization of chitosan‐modified polymethyl methacrylate latex particles

Stable chitosan‐modified polymethyl methacrylate (PMMA) latex particles were prepared by using 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) as the cationic initiator. The polymerization rate (R_p) is controlled by the V‐50 concentration ([V‐50]) and R_p is less sensitive to the chitosan concentration ([C]) used in the synthesis work. The reaction system follows Smith–Ewart Case III kinetics due to the relatively large particles produced. The zeta potential data show that the isoelectric point (pI) of the latex particles is 10.7. The amounts of V‐50 (C_V‐50) and chitosan (C_c) ultimately incorporated into the particles correlate reasonably well with [V‐50] and [C], respectively. At pH 7, the quantity of the negatively charged bovine serum albumin (BSA, pI = 4.8) adsorbed on the positively charged chitosan‐free particles (Q) via the electrostatic interaction increases with increasing C_V‐50. However, Q is relatively insensitive to changes in C_c. This result implies that only the outermost region of the hairy chitosan‐modified particles is available for adsorption of the relatively large protein species. Colloidal stability shows a significant influence on the BSA adsorption process. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1489–1499, 1999     

Structure of fumed silica gels in dodecane: enhanced network by oscillatory shear

The structure and viscoelastic properties of fumed silica gels in dodecane were studied by means of dynamic rheology. With increasing the specific surface area of fumed silica nanoparticles, the plateau elastic modulus (G′), which is frequency-independent and shows the characteristic of a network of the fumed silica gels, decreases. Such networks of fumed silica gels show a significant temperature-dependent behavior and a transition temperature (T _c) related with the restructuring of nanoparticle chain aggregates of fumed silica in gels. Under oscillatory shear, the fumed silica gels experience disorganization and reorganization and present strong structural recovery ability after adjusting oscillatory shear (AOS) at small strain amplitudes (1–10%), and a more perfect network structure than that in origin gels can be induced. Elevated temperature (above T _c) improves the network structure to be more compact and stronger than that at a lower temperature, as a result, the deformation resistance during the AOS period and the structural recovery after AOS are enhanced. These results indicate that the network structure and viscoelastic properties of fumed silica gels can be tailored and optimized by performing small-amplitude oscillatory shear at a properly selected temperature.     

Amperometric hydrogen peroxide biosensor based on a glassy carbon electrode modified with polythionine and gold nanoparticles

We report on a novel hydrogen peroxide biosensor that was fabricated by the layer-by-layer deposition method. Thionine was first deposited on a glassy carbon electrode by two-step electropolymerization to form a positively charged surface. The negatively charged gold nanoparticles and positively charged horseradish peroxidase were then immobilized onto the electrode via electrostatic adsorption. The sequential deposition process was characterized using electrochemical impedance spectroscopy by monitoring the impedance change of the electrode surface during the construction process. The electrochemical behaviour of the modified electrode and its response to hydrogen peroxide were studied by cyclic voltammetry. The effects of the experimental variables on the amperometric determination of H₂O₂ such as solution pH and applied potential were investigated for optimum analytical performance. Under the optimized conditions, the biosensor exhibited linear response to H₂O₂ in the concentration ranges from 0.20 to 1.6?mM and 1.6 to 4.0?mM, with a detection limit of 0.067?mM (at an S/N of 3). In addition, the stability and reproducibility of this biosensor was also evaluated and gave satisfactory results.

Highly specific revelation of rat serum glycopeptidome by boronic acid-functionalized mesoporous silica

Although the specific profiling of endogenous glycopeptides in serum is highly inclined towards the discovery of disease biomarkers, studies on the endogenous glycopeptides (glycopeptidome) have never been conducted because of several factors. These factors include the high dynamic range of serum proteins, the inadequacy of traditional sample preparation techniques in proteomics for low-molecular-weight (LMW) proteins, and the relatively low abundances of glycopeptides. Boronic acid-functionalized mesoporous silica was synthesized in this study to overcome the limitations of the state-of-the-art methods for glycopeptidome research. The boronic acid-functionalized mesoporous silica exhibited excellent selectivity by analyzing glycopeptides in the mixture of glycopeptides/non-glycopeptides at molar ratio of 1:100, extreme sensitivity (the limit of detection was at the fmol level), good binding capacity (40 mg g⁻¹), as well as the high post-enrichment recovery of glycopeptides (up to 88.10%). The as-prepared material possessing both glycopeptide-suitable pore size and glycopeptide-specific selectivity has shown special capability for enriching the endogenous glycopeptides. Fifteen unique glycosylation sites mapped to 15 different endogenous glycopeptides were identified in rat serum. The established protocol revealed for the first time the rat serum glycopeptidome.