Splitting-on-demand optical power splitters using multimode interference (MMI) waveguide with programmed modulations

Reconfigurable multi-channel optical power splitter is proposed and its optical properties are calculated. The device can dynamically reconfigure the number of splitting channels by providing programmed refractive index modulations on a multimode interference (MMI) waveguide. A reconfigurable 3-channel optical power splitter is designed to work as 1 × 1, 1 × 2 or 1 × 3 optical power splitter depending on the state of the heat electrodes using thermo-optic modulation, and the input light can be distributed to three output channels with sequential orders. The device can work in the whole C-band (1530-1565 nm) with extinction ratio better than −29.0 dB, excess loss better than −0.45 dB, imbalance better than 0.08 dB and polarization dependent loss (PDL) better than 0.14 dB. The design conception is scalable to a multi-channel splitting-on-demand optical power splitter which can divide input light to 1, 2, …, N output channels equally by using the 3-channel reconfigurable optical power splitter as a building block.     

Synthesis, microstructure and photoluminescence of Eu/Tb activated Y2SiO5 nanophosphors by new silicate sources

Y_2−xTb_xSiO₅ and Y_2−xEu_xSiO₅ nanophosphors with seven different kinds of silicate sources were synthesized by sol-gel method. The structures have been investigated to be composed of nanometer-size grains of 30-60 nm through X-ray diffraction (XRD) and scanning electron microscopy (SEM) was used to compare the different morphology of patterns from seven different silicon sources. The photoluminescence of Y_2−xTb_xSiO₅ was investigated as a function of silicate sources and the results revealed that these nanometer materials showed the characteristic emission ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) of Tb ions. The characteristic emission ⁵D₀ → ⁷F_J (J = 1, 2, 4) of Eu ions was also found in the materials of Y_2−xEu_xSiO₅.     

Surface modification with fibronectin or collagen to improve the cell adhesion

Objective

The surface of biomaterials plays a critical role in determining bioactivity. The aim of this study was to evaluate the cell adhesion and proliferation of ADSCs on the surface of biomaterial which is modified with fibronectin or collagen.

Materials and methods

Adipose-derived stromal cells (ADSCs) were obtained from SD rats, expanded in culture, and seeded onto scaffold surface-modified with fibronectin or collagen. To characterize cellular attachment, cells were incubated on scaffold for 1 and 2 h and then counted the cells attached onto the scaffold. The MTT assay was chosen to evaluate the proliferation at days 1, 4, 7 and 14. After 7 d of culture, scanning electron microscope was chosen to observe cell morphology and attachment of ADSCs on the scaffolds.

Results

Attachment at 1 and 2 h of cells on scaffold modified with fibronectin was significantly greater than in control, but not with collagen. The MTT assay revealed that ADSCs proliferation tendency was nearly parallel to that in control. The scanning electron microscope (SEM) showed that ADSCs in experiment expanded thoroughly and excreted much extracellular materials.

Conclusions

Surface modification with fibronectin or collagen can enhance the attachment of cultured ADSCs on the scaffold, but it had not evident effect to proliferation.     

拟南芥胚的不同区域对MeV离子辐照的响应

利用不同能量的质子在大气环境中辐照拟南芥的含水种子，能量从1.1MeV到6.5MeV.根据模拟计算结果，相应能量的离子对种子的损伤区域分别为胚的浅层、胚的一半和整个胚.本实验中，具有较高能量的质子可以完全均匀地作用于拟南芥生长、发育及遗传密切相关的胚茎端分生组织，而能量较低的质子则不能直接作用于茎端分生组织.实验所用质子注量范围为4×10⁹ions/cm²—1×10¹⁴ions/cm².实验结果显示，虽然拟南芥种子的发芽率和幼苗存活率随离子注量增加都呈现下降的趋势，但对应于不同的胚损伤区域，即在不同的入射质子能量条件下，注量曲线具有各自的特征.实验结果显示，拟南芥种子中除了胚茎端分生组织作为对离子辐照敏感的辐射主靶外，茎端分生组织之外的胚区域可能作为离子辐射次靶，影响到最终的辐射生物学效应. 关键词： 离子辐照 拟南芥 胚区域 生物效应     

CsNiCl3晶体的光谱精细结构、零场分裂参量及Jahn-Teller效应

应用不可约张量理论构造了三角对称晶场中3d²/3d⁸态离子的45阶可完全对角化的微扰哈密顿矩阵，研究了CsNiCl₃晶体的光谱精细结构、晶体结构、零场分裂参量、Jahn-Telller效应以及自旋单重态对Ni²⁺离子基态能级的影响，理论与实验相符合.在此基础上，进一步研究了以前工作中被忽略的自旋-自旋耦合作用和Trees修正对CsNiCl₃晶体的光谱精细结构和零场分裂参量的影响，发现有四种机理会影响零场分裂参量：1)自旋-轨道耦合机理，2)自旋-自旋耦合机理；3)自旋-轨道与自旋-自旋联合耦合机理；4)自旋-轨道与Trees修正联合耦合机理，其中自旋-轨道耦合机理是最主要的，其他三种机理也是不可忽略的. 关键词： 基态能级 精细结构 零场分裂 自旋-自旋耦合     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

单甲基原位改性SiO2疏水减反膜的制备与性能研究

 在碱性条件下通过TEOS和MTES的共水解缩聚反应制备了单甲基原位改性的SiO₂溶胶，并使用提拉法在K9玻璃基片上镀制了疏水减反膜。通过透射电镜（TEM）考察了镀膜溶胶的微结构，分别使用红外光谱（FTIR）分析了薄膜的组分，用原子力显微镜（AFM）观察了薄膜的表面形貌和起伏状况，用紫外可见光谱（UV-vis）考察了薄膜的减反射性能，用接触角仪测量了薄膜对水的接触角。并使用“R-on-1”的方式测量了薄膜在Nd:YAG激光（1 064 nm，1 ns）作用下的损伤阈值。结果表明，通过共水解缩聚反应可以把甲基引入镀膜溶胶簇团中，改善了溶胶簇团的网络结构，使薄膜得到相当好的疏水性能和更好的抗激光损伤性能，同时薄膜能保持较好的减反射性能。     

Optical Planar Waveguides in KTiOPO4 Crystals by MeV Oxygen Ion Implantation

We report on the optical planar waveguide formation in KTiOPO4 crystals by single or double oxygen ion implantation at energies of 2.4-3.0 MeV and doses of 1015 ions/cm^2. The dark-line spectroscopy properties are investigated by a prism-coupling method. With an effective refractive index method, the refractive index profiles of the waveguides are reconstructed. The program code TRIM＇98 （transport of ions in matter） is used to simulate the implantation process of oxygen ions into the KTiOPO4 crystal. It is found that an inherent relationship exists between the nuclear damage and the refractive index changes induced by the ion-beam implantation.     

二(2-乙基己基)磷酸稀土配合物的红外和拉曼光谱

用稀土氯化物与二(2-乙基己基)磷酸反应制备了14种标题配合物,测定了配合物的红外和拉曼光谱,对其主要红外和拉曼谱带进行了归属.结果表明,Ln(DEHP)3应具有与Sm(DMP)3和Pr(DMP)3相同的配位形式和结构类型,每个稀土离子通过双O-P-O桥与邻近的三个稀土离子相连接,形成"双桥二十四元环"的多聚网络结构.Ln-O键基本上是离子键.     

偏振差分反射光谱研究半导体材料的平面内光学各向异性

介绍了偏振差分反射光谱的原理,并结合半导体材料平面内光学各向异性的来源,总结了偏振差分反射光谱作为一种重要的表面、界面分析技术在半导体材料研究中的应用,并分析指出其在Si基材料电光改性研究中将会起到重要作用。