Growth of highly oriented crystalline polyaniline films by self-organization

Silicon substrates with (100) orientation were modified with amino-silane self-assembled monolayer (SAM) to provide amino (NH(2)) moieties at the substrate surface. Self-organization of polyaniline during chemical polymerization, on this modified surface, leads to the growth of highly oriented films at the substrate-polymer interface. The morphology studied using scanning electron microscopy and atomic force microscopy revealed the formation of polymer film with well faceted pyramidal crystallites. XPS and FTIR spectroscopy were used to analyze the chemical structure of the film. X-ray diffraction measurements show the crystalline nature of the polyaniline, whose lattice parameters are in agreement with the reported values. This study underlines the importance of a SAM in deciding the structure and morphology of the deposited polymer.     

Comparison of Spectroscopic and Lasing Properties of Different Types of Sol-Gel Glass Matrices Containing Rh-6G

Rhodamine-6G (Rh-6G) is embedded in sol-gel glass samples which have been prepared by three different methods namely: 1) using HCl as catalyst and glycerol as Drying Control Chemical Additive (DCCA), 2) using HCl as catalyst at 60 °C and drying at room temperature and 3) using HCl as catalyst at 60 °C and heated at 600 °C for 3 h. Comparative studies of spectroscopic and lasing properties of the three types of Rh-6G containing samples were carried out with the lapse of time upto 8 months. Photostability of Rh-6G containing sol-gel samples is measured in terms of half life under Nitrogen laser pumping as number of pulses of N₂ laser necessary to reduce the dye laser intensity to 50% of the original value and value is 7500 pulses at 1.67 Hz rate. The best performance of Rh-6G, as far as its spectroscopic and lasing properties are concerned was found in third type of host matrices using HCl as catalyst at 60 °C and heated at 600 °C for 3 h.     

Effect of Indium and Antimony Doping on SnS Photoelectrochemical Solar Cells

Single crystals of pure SnS, indium （In） and antimony （Sb） doped SnS are grown by the direct vapor transport technique. Two doping concentrations of 5 at. % and 15 at. % are employed for both In and Sb dopants. In total, five samples are studied, i.e., pure SnS, 5at.% In-doped SnS, 15at.% In-doped SnS, 5at.% Sb-doped SnS and 15at.% Sb-doped SnS single crystals. The energy dispersive analysis of x-ray （EDAX） and x-ray diffraction （XRD） analysis show that all the five as-grown single crystal samples possess near perfect stoichiometry and orthorhombic structure, respectively. The doping of In and Sb in SnS is established from the EDAX data and from the shift in the peak positions in XRD. Photoeleetroehemical （PEC） solar cells are fabricated by using the as- grown single crystal samples along with iodine/iodide electrolytes. Mott-Schottky plots for different compositions of iodine/iodide electrolytes show that O. 025 M 12 ＋ 1 M Nal＋2 M Na2 S04 ＋0.5 M 1-12 S04 will be the most suitable electrolyte. Study of efficiency （η） and fill factor for different intensities of illuminations at room temperature is carried out for the five samples. The In-doped SnS single crystals show better PEC efficiency than the undoped and Sl〉doped SnS single crystals.     

The resistance of metallic plates to localized impulse

The responses of metallic plates and sandwich panels to localized impulse are examined by using a dynamic plate test protocol supported by simulations. The fidelity of the simulation approach is assessed by comparing predictions of the deformations of a strong-honeycomb-core panel with measurements. The response is interpreted by comparing and contrasting the deformations with those experienced by the same sandwich panel (and an equivalent solid plate) subjected to a planar impulse. Comparisons based on the center point displacement reveal the following paradox. The honeycomb panel is superior to a solid plate when subjected to a planar impulse, but inferior when localized. The insights gained from an interpretation of these results are used to demonstrate that a new design with a doubly-corrugated soft core outperforms solid plates both for planar and localized impulses.     

The dynamic response of clamped rectangular Y-frame and corrugated core sandwich plates

The dynamic response of fully clamped, monolithic and sandwich plates of equal areal mass has been measured by loading rectangular plates over a central patch with metal foam projectiles. All plates are made from AISI 304 stainless steel, and the sandwich topologies comprise two identical face-sheets and either Y-frame or corrugated cores. The resistance to shock loading is quantified by the permanent transverse deflection at mid-span of the plates as a function of projectile momentum. At low levels of projectile momentum both types of sandwich plate deflect less than monolithic plates of equal areal mass. However, at higher levels of projectile momentum, the sandwich plates tear while the monolithic plates remain intact. Three-dimensional finite element (FE) calculations adequately predict the measured responses, prior to the onset of tearing. These calculations also reveal that the accumulated plastic strains in the front face of the sandwich plates exceed those in the monolithic plates. These high plastic strains lead to failure of the front face sheets of the sandwich plates at lower values of projectile momentum than for the equivalent monolithic plates.     

Final state gluon effects in charmed meson decays

In the valence-quark c-decay scheme the decay $\text{D}{}^0\text{→}\text{K}{}^0\text{π}{}^0$ is expected to be strongly suppressed. We suggest that final state soft gluon exchange may account for the rather large branching ratio recently measured for this process, and study two-body decays of charmed mesons in our new scheme.     

Analysis of wastewater for anionic and cationic nutrients by ion chromatography in a single run with sequential flow injection analysis

To prevent nutrient enrichment and, hence the undesirable ecological impacts, the nutrients monitored in wastewater samples include two anionic species, i.e., nitrate and orthophosphate, and a cationic species, ammonium. Ion chromatography (IC) is one of the popularly used techniques for determinations of nitrate and phosphate in these samples, whereas determination of ammonium in wastewater samples is typically done using manual or automated wet chemistry, e.g., flow injection analysis (FIA). We have developed a sequential IC–FIA method, using Lachat’s QC8000 IC system, which allows determinations of nitrate, phosphate and ammonia in a single injection. In this system, a QuikChem Small Suppressor cartridge is regenerated in between the samples. A sample is injected while leaving the suppressor off-line. Ammonium, a cation, elutes in the void volume of an anion-exchange column. The unsuppressed column effluent, exiting the conductivity flow cell, up to this point is used for FIA determination of ammonia. When ammonia exits the conductivity flow cell, a fully regenerated suppressor is brought in-line for conductometric detection of the anions. Analog data are simultaneously acquired from colorimetric and conductometric detectors, for the cationic and anionic nutrients, respectively. The method is accurate with spike recoveries in wastewater samples ranging from 91% for nitrate to 114% for chloride. It is precise with RSD values, for replicate analyses (n=7) of a mid-range standard, ranging from 0.4% for phosphate to 1% for nitrate.     

Thermogravimetric analysis of cobalt sulfate

Morpholine is a base of moderate strength, comparable with that of ammonia, and capable of forming -onium-type salts. Extensive studies [1,2] have been made on the thermal stability of ammonium perchlorate because of its technological use as an oxidant in solid state rocket propellants. The preparation, characterization and thermal behaviour of morpholinium perchlorate are reported in this note. The study was followed by XRD, IR, TG, DTA and mass spectral techniques.     

Effect of Cholesteric Liquid Crystalline Compounds on the Radical Polymerization of Methyl Methacrylate

Polymerization of methyl methacrylate was carried out at 55 and 65°C using benzoyl peroxide as initiator in the presence of the fol-lowing additives: (a) cholesteric compounds like cholesterol, cho-lesteryl acetate, cholesteryl caprylate, cholesteryl stearate, choles-teryl chloride, cholesteryl laurate, cholesteryl oleyl carbonate, and cholesteryl 2-ethylhexyl carbonate, (b) a nematic liquid crystal, N-(p-methoxy benzylidene)-p-butyl aniline, and (c) rodlike molecules like 2-butynediol and diacetylene diol. The rates of polymerization, activation energies, molecular weights, and tacticities of the poly-mer are discussed in the light of monomer + additive interactions. It is found that monomer-additive complexes affect the polymerization rates.