Cu-Chelex as a selective adsorbent for o-nitroso derivatives of phenolic substances

Summary Chelex resins in several metal forms were tested for selective uptake of o-nitrosonaphthols and o-nitrosophenols from aqueous solution. Cu-Chelex was the most efficient resin over a wide pH range, and the taken-up nitroso compounds were effectively eluted with concentrated ammonia: acetonitrile (4:1, v/v) after washing the resin with acetonitrile to eliminate non-specific binding. The upper and lower limits of uptake capacity of the resin for 1-nitroso-2-naphthol were 0.5 mol/100 mg and 1.25 mol/100 mg, respectively. A preliminary recovery experiment using urine and cucumber juice showed that Cu-Chelex would be useful for screening of o-nitroso derivatives of phenolic substances in complicated samples such as biological fluids and foods.     

Age-dependent variations of cell response to oxidative stress: proteomic approach to protein expression and phosphorylation

We investigated the protein profiles of variously aged rat astrocytes in response to oxidative stress. After H2O2-exposure of cells at 100 microM for 30 min, the relative intensity of ten protein spots changed on two-dimensional (2-D) gels compared with control gels after silver staining. Matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) analysis after in-gel digestion revealed that six of these spots corresponded to three kinds of proteins, each of which was composed of a protein and its modified form with a different isoelectric point (pI). These three proteins were identified as peroxiredoxins (PRDXs) II and III, and calpactin I light chain (p11). H2O2-exposure increased the intensity of the spot with lower pI and simultaneously decreased that of the spot with higher pI for both PRDXs II and III. In addition, the expression of annexin VII, S-adenosyl-L-homocysteine hydrolase, elongation factor II fragment (EF-II), and adenosine deaminase was increased by H2O2-exposure in astrocytes from variously aged rats. Using the Pro-Q Diamond staining, heat shock protein 60 kDa (Hsp 60) and alpha-tubulin were observed to be phosphorylated upon H2O2-exposure. While phosphorylation of alpha-tubulin was correlated positively with age, the changes in abundance of ten protein spots as described above were independent of age. These results suggest that aging does not suppress the responses aimed at limiting injury and promoting repair brought about by severe oxidative stress, and might affect cell dynamics including the formation of microtubules.     

Extraction and spectrophotometric determination of zinc in coal fly ash and pond sediments with 2-[2-(3,5-dibromopyridyl)azo]-5-dimethylaminobenzoic acid

An extraction-spectrophotometric method is described for the determination of traces of zinc with 2-[2-(3,5-dibromopyridyl)azo]-5-dimethylaminobenzoic acid. The reagent forms a stable, blue 1:2 zinc/reagent complex that can be extracted into chloroform. The apparent molar absorptivity of the zinc(II) complex is 1.26 × 10⁵ l mol^?1 cm^?1 at 610 nm in chloroform. The reagent is relatively selective; interferences from cobalt, copper and nickel can be masked with dimethylglyoxime and aluminium and iron with a mixture of sodium fluoride and triethanolamine. The method is applied to the determination of zinc in coal fly ash and pond sediments with good precision and accuracy.     

Slurry sampling techniques for the determination of lead in Bangladeshi fish samples by electrothermal atomic absorption spectrometry with a metal tube atomizer

Ultrasonic slurry sampling electrothermal atomic absorption spectrometry with a metal tube atomizer has been applied to the determination of lead in Bangladeshi fish samples. The slurry sampling conditions, such as slurry stabilizing agent, slurry concentration, pyrolysis temperature for the slurried fish samples, particle size and ultrasonic agitation time, were optimized for electrothermal atomic absorption spectrometry with the Mo tube atomizer. Thiourea was used as the chemical modifier for the interference of matrix elements. The detection limit was 53 fg (3S/N). The determined amount of lead in Bangladeshi fish samples was consistent with those measured in the dissolved acid-digested samples. The advantages of the proposed methods are easy calibration, simplicity, low cost and rapid analysis.     

High performance liquid chromatography with an electrochemical detector in the cathodic mode as a tool for the determination of p-nitrophenol and assay of acid phosphatase in urine samples

Utilizing a commercially available helium-purging device and PEEK tubes for all tubing, especially for connection between the mobile phase and pump, high performance liquid chromatography with an electrochemical detector (ECD/HPLC) at the cathodic mode is a simple and precise method for the determination of p-nitrophenol (NP). Studies with cyclic and hydrodynamic voltammetry indicated that 25% aqueous MeOH containing 0.1% (v/v) CF(3)CO(2)H and -0.8 V vs. Ag/AgCl are the best mobile phase and detection potential for cathodic ECD/HPLC. With the present system, the limits of detection and determination were 0.2 and 0.25 microM, respectively, and up to 50 microM, a linear calibration curve was afforded. Within-day precisions for the analysis of 5 and 50 microM NP were 0.8 and 0.7% (n=6), respectively, and between-day precisions (n=6) for these samples were 3.5 and 2.2%, respectively. Compared with the commonly used Bessey-Lowry-Brock method, cathodic ECD/HPLC was useful for the assay of acid phosphatase in urine samples with p-nitrophenyl phosphate disodium salt as a substrate.     

Determination of phosphorus in biological material using electrothermal atomisation atomic absorption spectrometry with a molybdenum tube atomiser

Phosphorus has been determined by electrothermal atomisation atomic absorption spectrometry with a molybdenum tube atomiser. The effects of interferents on the phosphorus signal have been investigated. Chemical interferences were eliminated by high-temperature pyrolysis. The detection limit for the molybdenum tube system was 2.3 ng (corresponding to 2.3 micrograms ml-1 when 1 microliter was injected into the atomiser) and the characteristic mass was 1.9 ng of phosphorus. A calibration graph method combined with high-temperature pyrolysis has been evaluated through the determination of phosphorus in biological materials. The sensitivity, accuracy and precision of the method were superior to or nearly equal to those of graphite furnace atomic absorption spectrometry. The advantages of the high-temperature pyrolysis method are its simplicity and low cost.     

Carrier generation process on photoconductive polymer films as studied by magnetic field effects on the charge-transfer fluorescence and photocurrent

We have studied the magnetic field effects (MFEs) on the charge-transfer fluorescence and transient photocurrent of a 1,2,4,5-tetracyanobenzene-doped poly(N-vinylcarbazole) film, which reflect the recombination and escape yields of the carriers, respectively. The recombination yield dependence of the external magnetic field (B) clearly shows two types of the MFEs, growth with increasing B due to the hyperfine mechanism (HFM) and a negative dip due to the level-crossing mechanism (LCM). On the other hand, the escape yield indicates complementary MFEs with a sharp decrease in yield with increasing B and then a positive dip. Simultaneous observation of the HFM- and LCM-MFEs proves the stepwise hole-hopping mechanism rather the long-range hole-jumping one. The quantitative analysis of the recombination and escape MFEs is performed using the stochastic Liouville equations (SLE) for a one-dimensional lattice model in which the stepwise hole hops take place between the nearest neighbor carbazole units with spin conservation. The SLE analysis provides the recombination and hole transfer rate constants of 7.0 x 10(7) and 4.5 x 10(8) s(-1), respectively. The boundary site number for the ion pairs in the one-dimensional model is estimated by the best fit to the experimental results. The interionic distance of the boundary ion pair in the one-dimensional model including eight sites agrees with the thermalization distance in the Onsager model. Hence, it is concluded that the elementary processes in the Onsager model applied to molecular amorphous solids are the stepwise hole hops rather than a long-range hole jump.