Magnetic behavior of Fe0.2Mg0.8TiO3 and Fe0.3Mg0.7TiO3 probed by Mössbauer timescale

Magnetization and Mössbauer measurements have been made on a diluted antiferromagnets Fe_xMg_1?xTiO₃ with x=0.2, 0.3 and 0.7. It has been demonstrated that this system exhibits a spin glass or a reentrant spin glass like behavior in the samples with x around the percolation concenrration x_c≈0.25. It has been shown that various sizes of magnetic clusters are formed well above the transition temperatures determined by the magnetization measurements in the samples with x near x_c. The behavior of Fe_0.2Mg_0.8TiO₃ is discussed as a typical cluster glass.     

Development of Very-Low-Temperature Millimeter-Wave Electron-Spin-Resonance Measurement System

We report the development of a millimeter-wave electron-spin-resonance (ESR) measurement system at the University of Fukui using a ³He/⁴He dilution refrigerator to reach temperatures below 1 K. The system operates in the frequency range of 125–130 GHz, with a homodyne detection. A nuclear-magnetic-resonance (NMR) measurement system was also developed in this system as the extension for millimeter-wave ESR/NMR double magnetic-resonance (DoMR) experiments. Several types of Fabry–Pérot-type resonators (FPR) have been developed: A piezo actuator attached to an FPR enables an electric tuning of cavity frequency. A flat mirror of an FPR has been fabricated using a gold thin film aiming for DoMR. ESR signal was measured down to 0.09 K. Results of ESR measurements of an organic radical crystal and phosphorous-doped silicon are presented. The NMR signal from ¹H contained in the resonator is also detected successfully as a test for DoMR.     

Status of heavy element research using a gas-filled recoil separator at RIKEN

A gas-filled type of recoil separator for heavy element research was installed at an experimental hall of RIKEN Linear Accelerator facility to realize getting higher intensity of primary beam and long beam time. Performance of the separator was studied using target recoils and various nuclear reactions. The results show the high performance of the separator for heave element research. As an application of the GARIS, production and identification of an isotope of the 110th element ²⁷¹[110] have been performed using the ²⁰⁸Pb(⁶⁴Ni,1n)²⁷¹[110] reaction. Three decay chains coincide well both in decay times and energies with the ones reported by the group of SHIP experiment at GSI, Germany. Our results provide a confirmation of the synthesis of an isotope ²⁷¹[110] of element 110.     

Influence of fundamental frequency and source elevation on the vertical localization of complex tones and complex tone pairs

This study investigates the vertical localization of single complex tones (monads) and simultaneous complex tone pairs (dyads), especially as it is affected by their fundamental frequency and source elevation. Two complex tone timbres are considered: one consisting of five low-order harmonics, and the other of all odd harmonics (a square wave). Sound sources were at -15, 0, 15, and 30 deg from the horizontal plane at ear height. For eight subjects, this source array was in the median plane, and for a further nine subjects, it was directly to the subject's left (lateral plane). The subjects localized the angle of the auditory image(s) of one or two complex tones around the vertical plane containing the sound sources. Mean responses for the five-harmonic complex tones show a systematic effect (referred to as Pratt's effect) of fundamental frequency on vertical localization--whereby high-frequency complex tones are localized to positions higher than low-frequency complex tones for equivalent source positions. For the square wave, the sound-source position dominates localization, although some effect of fundamental frequency is evident for median plane sources.     

A pilot study on improving the absorptivity of a thick microperforated panel absorber

Microperforated panel (MPP) absorbers are promising as a basis for the next-generation of sound absorbing materials. MPPs are typically made of a thin metal or plastic panel. However, thin limp panels are generally not suitable as an interior finish of room walls because they do not have sufficient strength, which prevents practical application of MPPs as an interior finish of room walls. In order to overcome the lack of appropriate strength required for room walls, it is possible to make an MPP out of a thick panel. However, thick MPPs are usually not efficient because the resistance and/or reactance become too high. In this study, trial production of thick MPPs and measurement of their normal absorption coefficients were carried out. Results show that efficient absorption can be given with a thick MPP by using a tapered perforation.     

Microstructure control of low-resistivity tin-doped indium oxide films grown by photoreaction of nanoparticles using a KrF excimer laser at room temperature

A tin-doped indium oxide (ITO) film on a SiO₂ substrate was prepared by photo-irradiation of spin-coated nanoparticles using a Xe excimer lamp and a KrF excimer laser. The effects of the excimer lamp and the excimer laser on the resistivity, mobility, and carrier concentration of the film were investigated. To better understand how to control the microstructure of the film, we investigated the effect of thickness on the resistivity of a film prepared by the two-step process, and found that the resistivity was higher in a thicker film. Using two-step irradiation plus one-step KrF irradiation in N₂ at room temperature, we produced an ITO film with lowest resistivity of any in this study. The electrical resistivity of this film was 5.94×10⁻⁴ Ω cm. On the other hand, when using a simple thermal process, the resistivity of a film sintered at 500°C in N₂ was 4.10×10⁻³ Ω cm. The differences in resistivity are discussed on the basis of the microstructure of the films using atomic force microscopy and Hall measurements.     

Acceptable range of speech level in noisy sound fields for young adults and elderly persons

The acceptable range of speech level as a function of background noise level was investigated on the basis of word intelligibility scores and listening difficulty ratings. In the present study, the acceptable range is defined as the range that maximizes word intelligibility scores and simultaneously does not cause a significant increase in listening difficulty ratings from the minimum ratings. Listening tests with young adult and elderly listeners demonstrated the following. (1) The acceptable range of speech level for elderly listeners overlapped that for young listeners. (2) The lower limit of the acceptable speech level for both young and elderly listeners was 65 dB (A-weighted) for noise levels of 40 and 45 dB (A-weighted), a level with a speech-to-noise ratio of +15 dB for noise levels of 50 and 55 dB, and a level with a speech-to-noise ratio of +10 dB for noise levels from 60 to 70 dB. (3) The upper limit of the acceptable speech level for both young and elderly listeners was 80 dB for noise levels from 40 to 55 dB and 85 dB or above for noise levels from 55 to 70 dB.     

Listening difficulty as a subjective measure for evaluation of speech transmission performance in public spaces

Listening difficulty ratings, using words with high word familiarity, are proposed as a new subjective measure for the evaluation of speech transmission in public spaces to provide realistic and objective results. Two listening tests were performed to examine their validity, compared with intelligibility scores. The tests included a reverberant signal and noise as detrimental sounds. The subject was asked to repeat each word and simultaneously to rate the listening difficulty into one of four categories: (1) not difficult, (2) a little difficult, (3) fairly difficult, and (4) extremely difficult. After the tests, the four categories were reclassified into, not difficult [response (1)] and some level of difficulty, (the other 3 responses). Listening difficulty is defined as the percentage of the total number of responses indicating some level of difficulty [i.e. not (1)]. The results of two listening tests demonstrated that listening difficulty ratings can evaluate speech transmission performance more accurately and sensitively than intelligibility scores for sound fields with higher speech transmission performance.