不同嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为

采用氢核磁共振(¹H-NMR)、动态光散射(DLS)及透射电子显微镜(TEM)对聚乙二醇-嵌段-聚甲基丙烯酸N,N-二甲氨基乙酯(PEG-b-PDMAEMA)三种具有不同PEG/PDMAEMA嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为进行了研究. 研究表明, 两嵌段比例是影响聚合物胶束化过程的关键因素: 只有当其中聚乙二醇含量较低(质量分数低于33%)时, 聚合物才具有其pH/温度敏感胶束化特性. 此外, 共聚物溶液随温度胶束化过程与共聚物嵌段比大小密切相关. PEG-b-PDMAEMA这种不同于传统双亲性嵌段共聚物(DHBCs)在选择性溶剂中独特的胶束化行为, 是由聚合物溶液体系中各种基团之间的氢键作用决定的.     

镀金和碳纳米管修饰金电极上吸附态葡萄糖氧化酶比活性的EQCM研究

采用石英晶体微天平(EQCM)技术监测了裸金电极、镀金和碳纳米管修饰金电极上葡萄糖氧化酶(GOD)的吸附过程. 通过EQCM测量吸附固定的GOD质量, 并实时检测酶反应产物H2O2的氧化电量, 求算了各表面上吸附态GOD的比活性(ESAi). 结果表明, 各表面上均可吸附一定的GOD, 且吸附态GOD均有一定的酶活性; 修饰CNTs可增大酶吸附量和酶电极对葡萄糖的响应电流, 但ESAi随CNTs修饰量的增大而降低; Au电极上电镀金后, 酶吸附量和酶电极对葡萄糖的响应电流亦增大, 但ESAi与裸金电极上的基本一致.     

Cu掺杂对LaMnO3催化剂的结构和催化氧化性能的影响

采用非晶态多核配合的方法合成了La1-xCuxMnO3(x=0、0.05、0.1、0.2、0.3、0.4、0.5)系列催化剂, 并用X射线衍射(XRD)、透射电镜(TEM)、比表面测定仪(BET)等手段对催化剂的微观结构进行了表征. 研究了Cu掺杂对钙钛矿结构及其对CO催化氧化发光性能及催化氧化CO、CH4性能的影响规律. 结果表明, 当x≤0.1 时, Cu掺杂仍可形成单相的钙钛矿结构; 当x>0.1时, 过量掺杂的Cu以CuO杂相存在. Cu掺杂可改善La1-xCuxMnO3催化剂对CO和CH4的催化氧化活性. 经700 ℃焙烧3 h制备的La0.9Cu0.1MnO3催化剂具有最高CO催化氧化活性(T100%=170 ℃), 该结果与CO催化氧化发光结果一致.而La0.95Cu0.05MnO3催化剂对CH4的催化氧化活性最高(T95%=705 ℃).     

298.15K下Li2B4O7-H2O体系水蒸汽分压及渗透系数的等压测定和离子相互作用模型

在已有研究含硼体系的文献中仅考虑了硼酸根B4O7^-2或B(OH)4^-和H3BO3的存在，而对Li2B4O7-H2O体系具有多种硼物种聚合平衡体系的热力学性质的研究尚未见报道．本文用等压法研究了Li2B4O7-H2O体系于298．15K下浓度由稀到过饱和溶液的平衡气相蒸汽压及渗透系数．考虑了水溶液中多种硼物种的存在，以Pitzer方程为基础，建立了可描述该含硼体系的离子相互作用模型。     

二（胍基）锆配合物的合成和表征

Addition of one equivalent of LiN（i-Pr）2 or LiN（CH2）5 to carbodiimides, RN=C=NR [R=cyclohexyl （Cy）, isopropyl （i-Pr）], generated the corresponding lithium of tetrasubstituted guanidinates {Li[RNC（N R^′2）NR]（THF）}2 [R=i-Pr, N R^′2=N（i-Pr）2 （1）, N（CH2）5 （2）; R=Cy, N R^′2=N（i-Pr）2 （3）, N（CH2）5 （4）]. Treatment of ZrCl4 with freshly prepared solutions of their lithium guanidinates provided a series of bis（guanidinate） complexes of Zr with the general formula Zr[RNC（N R^′2）NR]2Cl2 [R=i-Pr, N R^′2=N（i-Pr）2 （5）, N（CH2）5 （6）; R=Cy, N R^′2=N（i-Pr）2 （7）, N（CH2）5 （8）]. Complexes 1, 2, 5-8 were characterized by elemental analysis, IR and ^1H NMR spectra. The molecular structures of complexes 1, 7 and 8 were further determined by X-ray diffraction studies.     

Studies on Molecular Recongnition of (a)-Cyclodextrin with Diphenyl compounds

The cyclodextrins(CDs) are a class of cyclic oligosaccharides made up of six(a), seven(a)or more [a-(1,4)-linked] D-glucopyranose units, and shaped like truncated cones with primary and secondary hydroxyl groups crowning the narrower rim and wider rim respectively. As they have a hydrophobic cavity of appropriate dimension, they can bind with various guest moleculars, such as hydrocarbon, cyclohexane, aromatic compounds, to form inclusion complexes. The cyclodextins inclusion complexation has been considered an ideal model mimicking the enzyme-substrate interaction and a lot of effect has been devoted to it. In this paper, we report our investigation on the inclusion complexation behavior of a-cyclodextrin(a-CD) with diphenyl compounds in order to further explore the molecular recongnition mechanism of 2:1 inclusion complexation of a-CD with aromatic compounds.Figure 1: Possible structures of the inclusion compounds.The inclusion complexation behavior of a-CD with sym-diphenyl-urea, sym-diphenyl-thiourea and diphenyl kotone as respective guest moleclars was studied by ultraviolet spectrometric titrations.The absorption spectral changes observed for the compounds in the absence and presence of a-CD are used to draw the corresponding Benesi-Hildebrand plots and caculate the complex stability constant value (Ks) for the inclusion compounds.The 2:1 inclusion complexations show higher binding constants by cooperative binding of one guest molecular in the closely two hydrophobic cyclodextrin cavites as compared with 1:1 inclusion complexations.The highest value observed for sym-diphenyl-urea could be due to the formation of a hydrogen bond between the carbonyl group and the hydrogen in the hydroxyl group of CD and this is not possible with sym-tiphenyl-thiourea. The lowest value observed for diphenyl kotone indicate the hydrophobic interaction is one of the binding force of cyclodextrin inclusion complex.     

Solid-phase Synthesis of-Haloaldehydes from Polymer-supported 4-(Phenylseleno)morpholine

Polymer-supported reagents for organic synthesis are enjoying a renewed popularity with the emergence of combinatorial chemistry in recent years1. 4-(Arylseleno)morpholines formed in situ are useful -seleno-introducing reagents for saturated aldehydes2. -Sele- noaldehydes, as a frequently used intermediates, can be converted into -haloaldehydes by halogenating reaction3. However, organic selenium reagents always have a foul smell and are quite toxic, which is often problematic in organic sy…     

LC-MS~n测定2-[[(2′-氰基联苯基)-4-基]甲基]氨基-3-硝基苯甲酸乙酯中的不纯物

2-[[(2′-氰基联苯基)-4-基]甲基]氨基-3-硝基苯甲酸乙酯是生产抗高血压药坎地沙坦酯的中间产物[1],由3-硝基邻苯二甲酸为起始原料,经酯化、卤代、Curtius重排、与2-氰基-4′-溴甲基联苯缩合4步反应制得,合成路线见文献[2-3]。在生产过程中,每一步反应带来的副产物都影响到最终     

N,N''''-硝基苯酰基取代苯酰氨基硫脲的合成与生物活性

酰氨基硫脲类化合物不仅具有广谱抗菌性能 ,还具有极好的杀虫和植物生长调节活性 [1～ 3] ,因而引起许多国内外学者对硫脲类化合物的合成及其化学结构与生物活性关系方面的研究 [4～ 8] .为了进一步研究不同的取代基团对此类化合物生物活性的影响 ,作者用硝基苯酰基异硫氰酸酯与芳基酰肼加成制得相应的 N ,N -硝基苯酰基取代苯酰氨基硫脲 ( ) ,并初步测定了它们抑制大肠杆菌和枯草杆菌生长的生物活性 .这些化合物尚未见文献报道 .Ar— COCl KSCN Ar—CONCS a～ cAr CONHNH2 ( 1 ～ 7) Ar—CONHC( S) NHNHCOAr Ar:a.o-N…     

激光引发二氟卡宾与烯烃的反应

近十年来,激光引发一氯二氟甲烷红外多光子解离和激光敏化反应的研究非常活跃,但大部分工作都集中于解离机制及同位素分离,而对CF_2HC(?)多光子解离产生的二氟卡宾