Monolithic silica spin column extraction and simultaneous derivatization of amphetamines and 3,4-methylenedioxyamphetamines in human urine for gas chromatographic-mass spectrometric detection

A simple, sensitive, and specific method with gas chromatography-mass spectrometry was developed for simultaneous extraction and derivatization of amphetamines (APs) and 3,4-methylenedioxyamphetamines (MDAs) in human urine by using a monolithic silica spin column. All the procedures, such as sample loading, washing, and elution were performed by centrifugation. APs and MDAs in urine were adsorbed on the monolithic silica and derivatized with propyl chloroformate in the column. Methamphetamine-d₅ was used as an internal standard. The linear ranges were 0.01-5.0 μg mL⁻¹ for methamphetamine (MA) and 3,4-methylenedioxymethamphetamine (MDMA) and 0.02-5.0 μg mL⁻¹ for amphetamine (AP) and 3,4-methylenedioxyamphetamine (MDA) (coefficient of correlation ≧0.995). The recovery of APs and MDAs in urine was 84-94%, and the relative standard deviation of the intra- and interday reproducibility for urine samples containing 0.1, 1.0, and 4.0 μg mL⁻¹ of APs and MDAs ranged from 1.4% to 13.6%. The lowest detection limit (signal-to-noise ratio ≧ 3) in urine was 5 ng mL⁻¹ for MA and MDMA and 10 ng mL⁻¹ for AP and MDA. The proposed method can be used to perform simultaneous extraction and derivatization on spin columns that have been loaded with a small quantity of solvent by using centrifugation.     

Spectrophotometric determination of titanium with o-carboxyphenylfluorone in cationic micellar media, and its equilibrium and kinetic studies

Spectrophotometric determination of titanium(IV) was accomplished with o-carboxyphenylfluorone (OCPF) in the presence of hexadecyltrimethyl ammonium chloride (HTAC) under strongly acidic media. In the determination of titanium(IV), Beer's law was obeyed in the range of 24-340 ng mL⁻¹ with an effective molar absorption coefficient (at 530 nm) and relative standard deviation of 2.24 × 10⁵ dm³ mol⁻¹ cm⁻¹ and 0.64% (n = 8), respectively. The severe interference of iron ions was easily eliminated by the addition of ethylenediaminetetraacetic acid (EDTA); the effects of other foreign substances were low. Equilibrium and kinetic studies under analytical conditions were investigated to quantitatively evaluate the reaction mechanism. The obtained orange complex is considered to be Ti(OCPF)₄. Its stability log K_f and rate constant K_obs are 16.88 and 1.65 × 10⁻² s⁻¹, respectively. It is suggested that the color of the complex is related to the species of OCPF in the solution.     

Preparation of highly dispersible and tumor-accumulative, iron oxide nanoparticles Multi-point anchoring of PEG-b-poly(4-vinylbenzylphosphonate) improves performance significantly

This paper describes the preparation of iron oxide nanoparticles, surface of which was coated with extremely high immobilization stability and relatively higher density of poly(ethylene glycol) (PEG), which are referred to as PEG protected iron oxide nanoparticles (PEG-PIONs). The PEG-PIONs were obtained through alkali coprecipitation of iron salts in the presence of the PEG-poly(4-vinylbenzylphosphonate) block copolymer (PEG-b-PVBP). In this system, PEG-b-PVBP served as a surface coating that was bound to the iron oxide surface via multipoint anchoring of the phosphonate groups in the PVBP segment of PEG-b-PVBP. The binding of PEG-b-PVBP onto the iron oxide nanoparticle surface and the subsequent formation of a PEG brush layer were proved by FT-IR, zeta potential, and thermogravimetric measurements. The surface PEG-chain density of the PEG-PIONs varied depending on the [PEG-b-PVBP]/[iron salts] feed-weight ratio in the coprecipitation reaction. PEG-PIONs prepared at an optimal feed-weight ratio in this study showed a high surface PEG-chain surface density (≈0.8 chainsnm(-2)) and small hydrodynamic diameter (<50 nm). Furthermore, these PEG-PIONs could be dispersed in phosphate-buffered saline (PBS) that contains 10% serum without any change in their hydrodynamic diameters over a period of one week, indicating that PEG-PIONs would provide high dispersion stability under in vivo physiological conditions as well as excellent anti-biofouling properties. In fact we have confirmed the prolong blood circulation time and facilitate tumor accumulation (more than 15% IDg(-1) tumor) of PEG-PIONs without the aid of any target ligand in mouse tumor models. The majority of the PEG-PIONs accumulated in the tumor by 96 h after administration, whereas those in normal tissues were smoothly eliminated by 96 h, proving the enhancement of tumor selectivity in the PEG-PION localization. The results obtained here strongly suggest that originally synthesized PEG-b-PVBP, having multipoint anchoring character by the phosphonate groups, is rational design for improvement in nanoparticle as in vivo application. Two major points, viz., extremely stable anchoring character and dense PEG chains tethered on the nanoparticle surface, worked simultaneously to become PEG-PIONs as an ideal biomedical devices intact for prolonged periods in harsh biological environments.     

9-Azanoradamantane N-oxyl (Nor-AZADO): a highly active organocatalyst for alcohol oxidation

A highly active organocatalyst for alcohol oxidation has been developed. 9-Azanoradamantane N-oxyl (Nor-AZADO 4), constituting an unhindered, stable nitroxyl radical, exhibits superior catalytic activity to 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and AZADOs in the oxidation of alcohols to their corresponding carbonyl compounds.     

Thermoreversible gelation of isotactic-rich poly(N-isopropylacrylamide) in water

We report the experimentally determined phase diagram for an aqueous solution of isotactic-rich poly(N-isopropylacrylamide) (PNiPAM) composed of the sol-gel transition curve and the cloud-point curve. The meso diad content of isotactic-rich PNiPAM is 64%, and it is soluble in water at low temperatures, but undergoes a sol-to-gel transition with increasing temperature in the investigated concentration range of 1.8 wt. %-6.0 wt. %. With a further increase in temperature, the system becomes turbid. The gel formation and clouding behavior are thermally reversible. This is the first observation of thermoreversible gelation under the cloud-point temperature for an aqueous solution of PNiPAM. On the basis of the determined phase diagram, we carried out light scattering experiments to characterize the sol-gel transition behavior as a function of temperature.     

Intramolecular iodoetherification of ene or diene ketals: facile synthesis of spiroketals

A novel and rapid approach to chiral mono- or di-substituted spiroketals based on remote asymmetric induction by intramolecular iodoetherification of ene or diene ketals has been developed. This strategy concisely offers 5,5- and 5,6-spiroketals including the natural insect pheromone of the wasp.     

The synthetic and biological studies of discorhabdins and related compounds

Various analogues of the marine alkaloids, discorhabdins, have been synthesized. The strategy contains spirocyclization with phenyliodine(III) bis(trifluoroacetate) (PIFA), oxidative fragmentation of the β-amino alcohols with the hypervalent iodine reagent C(6)F(5)I(OCOCF(3))(2), the detosylation and dehydrogenation reaction of the pyrroloiminoquinone unit in the presence of a catalytic amount of NaN(3) and the bridged ether synthesis with HBr-AcOH as the key reactions. All the synthesized compounds were evaluated by in vitro MTT assay for cytotoxic activity against the human colon cancer cell line HCT-116. Furthermore, the discorhabdin A oxa analogues were also evaluated against four kinds of tumor model cells, a human colon cancer cell line (WiDr), a human prostate cancer cell line (DU-145) and murine leukemia cell lines (P388 and L1210). For the identification of the target, discorhabdin A and the discorhabdin A oxa analogue were evaluated by an HCC panel assay. In the test, discorhabdins could have a novel mode of action with the tumor cells.     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.