Fluorination of 2-alkyl-substituted oxanes. The synthesis and purification of perfluoro(2-alkyl-substituted oxane)s

Five kinds of 2-alkyl-substituted oxanes like 2-ethyloxane, 2-n-propyloxane, 2-iso-propyloxane, 2-n-butyloxane and 2-n-amyloxane were fluorinated electrochemically to give the corresponding perfluoro(2-alkyloxane)s. The perfluoro(2-alkyloxane)s were obtained in good yields from these starting materials together with isomeric perfluoro(2-alkyloxolane)s, perfluoro(2-alkyl-5-methyloxolane)s and perfluoro(dialkyl ether)s. The purification of the perfluoro(2-alkyloxane)s which contained small amounts of isomeric perfluoro(2-alkyloxolane)s was successfully achieved by recovering the former unreacted after treating these mixture with anhydrous aluminum chloride at 150 /sR 160 °C during /sR 48 hrs in order to convert the latter into the easy-separable perfluoro(2,5,5- trichloro-2-alkyloxolane)s. Small quantities of new perfluoro(5,5-dichloroalkanoyl chloride)s were also among the chlorination products. The spectroscopic data as well as the physical properties of these new fluorination products, and perfluoro(2,5,5-trichloro-2-alkyloxolane)s and perfluoro(5,5-dichloroalkanoyl chloride)s are presented.     

Lewis acid promoted cyclization of enyne triesters and diesters

Reactions of enynes with three or two ester groups (1-4) in the presence of halogen-ligand Lewis acids gave cyclized products with halide incorporation (5-8) with high generality. The cyclization process was also analyzed in a theoretical study. Facile isomerization and dehydrohalogenation of five-membered products 5 and 8 by Al(2)O(3) or Et(3)N were also observed; this process introduces conjugated moieties into the products.     

Simultaneous determination of tetrahydro-β-carbolines and β-carbolines

Summary Reversed-phase ion-pair HPLC with fluorimetric detectors connected in series was studied for the simultaneous determination of two tetrahydro--carbolines and two -carbolines. After additon of internal standards the samples were reacted with fluorescamine, and then subjected to serial extractions to remove their precursor (tryptamine) from the analytical system. This treatment not only suppressed the artefactual formation of tetrahydro--carbolines and -carbolines during analysis, but also effectively purified them. Under optimum conditions, using trifluoroacetic acid as counter ion, all analytes were separated within 14 min and without major interfering peaks. The quantitative ranges were 0.25–80.0 ng mL^–1 for both tetrahydro--carbolines and 0.1–30.0 ng mL^–1 for both -carbolines. Replicate spiking experiments showed that recovery from most of the samples tested was over 90% and the relative standard deviation ranged from 0.7 to 10.4% within and between assays. The proposed method was applicable to various materials such as soy sauce, vinegar, ketchup, tabasco, beer, wine, sake, whisky, brandy, cows' milk, coffee, cocoa, cheese, cigarette smoke and urine.     

Thermostability of <Emphasis Type="Italic">Cromobacterium viscosum</Emphasis> lipase in AOT/isooctane reverse micelle

The thermostability of Cromobacterium viscosum lip ase (EC 3.1.1.3) entrapped in AOT (sodium bis-[2-ethylhexyl] sulfosuccinate) reverse micelles was in creased by the addition of short-chain polyethylene glycol (PEG 400). Two different approaches were considered: (1) the determination of half-life time and (2) the mechanistic analysis of deactivation kinetics. The half-life of lipase entrapped in AOT/isooctane reverse micelles with PEG 400 at 60°C was 28h, ninefold higher than that in reverse micelles without PEG 400. The lip ase entrapped in both reverse micellar systems followed a series-type deactivation mechanism involving two first-order steps. The deactivation constant for the first step at 60°C in PEG containing reverse micelles was 0.055 h¹¹, 11-fold lower than that in reverse micelles without PEG, whereas it remained almost constant for the second step. The inactivation energy of the lip ase entrapped in reverse micelles with and without PEG 400 was 88.12 and 21.97 kJ/mol, respectively.     

Release characteristics of a free polyunsaturated fatty acid from an oily lymphographic agent

The release profiles of a free polyunsaturated fatty acid, alpha-linolenic acid, from solutions in an oily lymphographic agent Lipiodol-Ultra-Fluid (Lipiodol), to rabbit and human plasma, phosphate buffer solution (PBS), and PBS containing bovine serum albumin (BSA) were examined in vitro. The times required for 50% release of alpha-linolenic acid from Lipiodol were about 1 and 1.5 h in the rabbit and human plasma, respectively. Although only a slight amount of alpha-linolenic acid was released from Lipiodol to PBS after 24 h incubation at 37 degrees C, release was markedly enhanced by the addition of BSA to PBS. The amount of alpha-linolenic acid released from Lipiodol into PBS containing 5% BSA increased as the alpha-linolenic acid content in Lipiodol was increased. In all experiments, the release had stopped before all alpha-linolenic acid had been released. The prolongation of alpha-linolenic acid release from Lipiodol is considered a requisite for a selective anticancer effect of Lipiodol containing a free fatty acid on liver cancer.     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.     

La luminescence différée du styrène en solution vitreuse dans le méthylcyclohexane

The trapping of electrons and styrene cations and anions has been studied in a methylcyclohexane glass by the techniques of deferred luminescence. Radiothermoluminescence curves consist of two peaks, at 90 and 95°K, in this matrix. The second peak increases linearly with styrene concentration up to 2 × 10^?2M when it reaches a constant value, whereas the first peak increases from 10^?4 to 10^?3M and then decreases at higher concentrations and is not discernible at concentrations above 10^?2M. We propose two mechanisms which are qualitatively consistent with this behavior and are based essentially on the recombination of styrene cations with thermally detrapped electrons in the first peak and with anions in the second peak. Photothermoluminescence (i.e., thermoluminescence after photoionization with ultraviolet light) similarly consists of the 90 and 95°K peaks for a 10^?3M solution and of the 95° peak alone for a 10^?d M solution. Radiophotoluminescence excitation spectra at 77°K, corresponding to absorption spectra of trapped electrons and styrene anions, show that anions are the predominant negative species in 10^?2 molar solution, and trapped electrons in 10^?3 molar solution. Spectral analysis of radiothermoluminescenece shows the presence of two emission bands, one of which is identical with styrene fluorescence excited by the 254 Nm mercury line (λ_max = 292, 302, 307, and 317 Nm). The other band has three fairly poorly resolved maxima at 474, 486 and 496 nm and seems to correspond to the fluorescence of C₆H₅?H-CH₃ radicals formed during radiolysis.     

A twin optically-pumped far-infrared CH3OH laser for plasma diagnostics

A twin optically-pumped far-infrared CH₃OH laser has been constructed for use in plasma diagnostics. The antisymmetric doublet due to the Raman-type resonant two-photon transition is reproducibly observed at 118.8 m. With the 118.8-m line, it is obtained from the frequency separation of the anti-symmetric doublet that CH₃OH absorption line center is 16±1 MHz higher than the pump 9.7-m P(36) CO₂ laser line center. It is shown that the Raman-type resonant two-photon transition is useful in order to get several-MHz phase modulation for the far-infrared laser interferometer. Some preliminary performances of this twin laser for the modulated interferometer are described.This work was carried out under the collaborating research program at the Institute of Plasma Physics, Nagoya University, Nagoya 464, Japan.     

A redox-active ionic liquid manifesting charge-transfer interaction between a viologen and carbazole and its effect on the viscosity,ionic conductivity,and redox process of the viologen

Redox-active ionic liquids (RAILs) are gaining attention as a material that can create a wide range of functions. We herein propose a charge-transfer (CT) RAIL by mixing two RAILs, specifically a carbazole-based ionic liquid ([CzC₄ImC₁][TFSI]) as a donor and a viologen-based ionic liquid ([C₄VC₇][TFSI]₂) as an acceptor. We investigated the effect of CT interaction on the physicochemical properties of the CT ionic liquid (CT-IL) using the results of temperature-dependent measurements of UV-vis absorption, viscosity, and ionic conductivity as well as cyclic voltammograms. We employed the Walden analysis and the Grunberg–Nissan model to elucidate the effect of the CT interaction on the viscosity and ionic conductivity. The CT interaction reduces the viscosity by reducing the electrostatic attraction between the dicationic viologen and TFSI anion. It also reduces the ionic conductivity by the CT association of the dicationic viologen and carbazole. The electrochemically reversible responses of the viologens in [C₄VC₇][TFSI]₂ and CT-IL are consistent with the Nernstian and the interacting two-redox site models. Notably, the transport and electrochemical properties are modulated by CT interaction, leading to unique features that are not present in individual component ILs. The inclusion of CT interaction in RAILs thus provides a powerful means to expand the scope of functionalized ionic liquids.

A redox-active ionic liquid (RAIL) consisting of a carbazole and viologen shows charge transfer (CT) interaction. The physicochemical properties are modulated by the CT interaction by comparison with the individual RAILs.     

Reaction of 3,4-disubstituted 1,2,5-oxadiazole 2-oxides with dipolarophiles : Substituent and solvent effect on the reaction courses

A variety of symmetrically or unsymmetrically 3,4-disubstituttd furoxans such as dicyano, dialkyl, diacyl, bis(phenylsulfonyl), N.N'-dialkyldicarbamoyl, 3(or 4)-methyl-4(or -3)-phenyl(or nitro, ethoxy, phenoxy, phenylthio, pyrrolidinyl, phenylsulfonyl), 3(or 4)-ethyl-4(or -3)phcnyl, and 3(or 4)-ethoxy-4(or -3)-phenylsulfonylruroxan reacted with dipolarophiles in toluene or xylene at the refluxing temperature to give nitrone-type 1,3-dipolar cycloadducts, 5-substituted 1-aza-2,8-dioxabicyclo-[3.3.0]octanes and/or 3-substituted 2-isoxazoline 2-oxides. On the other hand, some of the furoxans gave 2-isoxazolines via nitrile oxide 1,3-dipolar cycloaddition in a toluene (or xylene)-DMF solvent at the refluxing temperature.