NMR and MO Studies on the Molecular Structure of a Fluoranthene-Benzene Complex

Summary. Fluoranthene (FA) forms a 1:1 van der Waals complex with benzene in cyclohexane. The ¹H NMR spectrum of this complex shows that the FA moiety in the complex state has five kinds of hydrogen atoms and that the ¹H NMR peaks assigned to the protons attached to the naphthalene skeleton are largely shifted to higher magnetic field on complex formation with benzene. These observations indicate that the complex takes the structure of C_S symmetry, in which the benzene molecule mainly interacts with the electronic system localized on the naphthalene moiety of FA. The present ab initio calculations reproduce well the ¹H NMR spectral shifts mentioned above and the experimentally predicted C_S structure of the complex. According to the PPP calculations for the electronic absorption spectral changes on the complex formation, the FA-benzene complex is considered to take a sandwich type structure.     

A concept for controlling singlet oxygen (1 Delta g) yields using nitroxide radicals: phthalocyaninatosilicon covalently linked to nitroxide radicals

In this study, we have investigated the singlet oxygen ((1)Delta(g)) generation mechanism using phthalocyaninatosilicon (SiPc) covalently linked to nitroxide radicals (NRs), and we succeeded in increasing the singlet oxygen quantum yield (Phi(Delta)) by linking the NRs. This originates from both an increase in the triplet quantum yield and excited-state lifetimes long enough to utilize photochemical reactions. Because the electron exchange interactions with paramagnetic species were known to result only in very fast excited-state relaxation, leading to a decrease in photochemical reaction yields, this increase in Phi(Delta) is an unusual and precious example for increasing photochemical reaction yields by electron exchange interactions with paramagnetic species. In addition, our experiments and theoretical analyses show that the spin-selective energy transfer rate constant is not influenced by linking the NRs and can be evaluated by the product of spin-statistical factors and matrix elements between the initial and final states.     

Different reaction modes for the oxidative dimerization of epoxyquinols and epoxyquinones. Importance of intermolecular hydrogen-bonding

An oxidative dimerization reaction, involving the three successive steps of oxidation, 6 pi-electrocyclization, and Diels-Alder reaction, has been experimentally and theoretically investigated for the three 2-alkenyl-3-hydroxymethyl-2-cyclohexen-1-one derivatives epoxyquinol 3, epoxyquinone 6, and cyclohexenone 10. Of the sixteen possible modes of the oxidation/6 pi-electrocylization/Diels-Alder reaction cascade for the epoxyquinone 6, and eight for the cyclohexenone 10, only the endo-anti(epoxide)-anti(Me)-hetero and endo-anti(Me)-hetero modes are, respectively, observed, while both endo-anti(epoxide)-anti(Me)-hetero and exo-anti(epoxide)-anti(Me)-homo reaction modes occur with the epoxyquinol 3. Intermolecular hydrogen-bonding is found to be the key cause of formation of both epoxyquinols A and B with 3, although epoxyquinone 6 and cyclohexenone 10 both gave selectively only the epoxyquinol A-type product. In the dimerization of epoxyquinol 3, two monomer 2H-pyrans 5 interact with each other to afford intermediate complex 28 or 29 stabilized by hydrogen-bonding, from which Diels-Alder reaction proceeds. Theoretical calculations have also revealed the differences in the reaction profiles of epoxyquinone 6 and cyclohexenone 10. Namely, the rate-determining step of the former is the Diels-Alder reaction, while that of the latter is the 6 pi-electrocyclization.     

Dissociation equilibrium between uncharged and charged local anesthetic lidocaine in a surface-adsorbed film

The dissociation equilibrium between uncharged local anesthetic lidocaine (LC) and charged local anesthetic LC (LCH⁺) in a surface-adsorbed film was investigated by measuring the surface tension and pH of aqueous solutions of a mixture of hydrochloric acid and LC. The surface tension values decreased slightly with increasing total molality m_t at 0X₂0.5, where X₂ is the mole fraction of LC in the mixture, while they decreased rapidly with increasing m_t at 0.5<X₂1. It was shown from the pH measurements that almost all LC molecules were changed into LCH⁺ ions by protonation at 0X₂0.5 and both forms coexisted only at 0.5<X₂1. The quantities of the respective LC and LCH⁺ transferred from the aqueous solution to the adsorbed film, i.e., their surface densities, were calculated by applying the thermodynamic equations derived to the surface tension and pH data. A greater quantity of LC than LCH⁺ existed in the adsorbed film at the coexisting composition. The partitioning behavior of LC and LCH⁺ in the adsorbed film was characterized by three composition regions: (1) slight partitioning of low surface-active LCH⁺ in the region at 0X₂0.5, (2) preferential partitioning of LC at 0.5<X₂<around 0.7, and (3) negative partitioning of LCH⁺ at around 0.7X₂1. The present results clearly indicate that uncharged local anesthetics transfer into hydrophobic environments such as cell membranes more than charged ones.     

Synthesis of porous vinylnaphthalene/divinylnaphthalene copolymers and their sorptive properties towards phenol and its derivatives

Four porous vinylnaphthalene/divinylnaphthalene (VN/DVN) polymers having three different nominal crosslinking degrees (60, 80 and 100 wt.%) have been synthesized using the suspension polymerization method in the presence of toluene and decane.The use of various crosslinking levels and inert diluents was aimed at changing the extent of polymeric network-diluent interactions. The resultant polymers have specific surface area in the range 450-700 m²/g depending on the DVN content. Two sets of pores were detected in all resins: one with the diameter of ≈2 nm and the second one in the range of 30-40 nm. Their sorptive properties have been studied using dilute (0.5 mmol/l) solutions of phenol and its derivatives (o-chlorophenol, 2-methylphenol, o-nitrophenol, m-nitrophenol and p-nitrophenol). It has been found that sorption, at low equilibrium concentration, follows the order: o-nitrophenol > o-chlorophenol > m-nitrophenol > o-methylphenol > p-nitrophenol > phenol. Full characteristics of the porous structure of resultant polymers was obtained by nitrogen adsorption at 77 K and their surface properties analyzed using Inverse Gas Chromatography.     

An improved method for synthesizing antennary β-d-mannopyranosyl disaccharide units

The merits of an indirect protecting method for hydroxyl groups using allyl groups via allyloxycarbonyl groups in the synthesis of antennary β-d-mannopyranosyl disaccharides from β-d-galactopyranosyl disaccharides were studied. Regioselective allyloxycarbonylation and conversion reactions involving simultaneous double S_N2 nucleophilic substitution at C-2′ and C-4′ of benzyl O-[β-d-galactopyranosyl]-(1-4)-3,6-di-O-benzyl-2-deoxy-2-N-phthalimido-β-d-glucopyranoside were examined for comparison with the direct allylation method. The required β-d-mannopyranosyl disaccharide having proper protecting groups was obtained using this indirect method in 52% yield. In contrast, the reported direct allylation method using methyl O-(β-d-galactopyranosyl) disaccharide gave the corresponding β-d-mannopyranosyl disaccharide in only 7.5% yield.     

Extraction—spectrophotometric determination of trace amounts of iron in waters with pyrogallol red and zephiramine

The simple removal of excess of co-extracted reagent in the solvent extraction of metal complex anions with a quaternary ammonium salt greatly improves the determination of iron(II) with pyrogallol red and zephiramine. The method with pyrogallol red is suitable for the determination of trace amounts of iron in natural waters. The apparent molar absorptivities of the iron(II) complex in chloroform are 7.5×10⁴ and 10.3×10⁴ 1 mol^-1 cm^-1 at 560 and 298 nm, respectively. A large excess of reagent can be added, and the ternary complex can be completely extracted over the pH range 8.5–10. Masking agents allow most interferences to be suppressed. The method is suitable for the analysis of potable, river and sea waters.     

The Interaction of Walsh-Orbitols in Diademane and Related Hydrocarbons

To obtain further information concerning the interaction between Walsh-orbitols of ‘conjugated’ cyclopropane rings, the photoelectron spectra of the following compounds have been recorded: bicyclo[4.1.0]heptane 1 , cis- and trans-tricyclo[5.1.0^{3, 5}]octane 2, 3 , diademane 4 , trans-pentacyclo[3.3.2.0^{2, 9}.0^{4, 10}, 0^{6, 8}]decan 5 and bicyclo[4.1.0]heptene-2 6 . The first bands in the PE.-spectra of these compounds have been assigned on the basis of a ZDO HMO-approximation. For 2 and 4 the value for resonance integral between linked 2p atomic orbitals of two adjacent eclipsed cyclopropane rings is found to be ?1.73 eV.     

Generation of 6-(Trifluoromethyl)-4,5-dihydro-2(3H)-pyridone and the Application to Synthesis of Some Fused Nitrogen Heterocycles Carrying a Trifluoromethyl Group on the Bridgehead Position via Radical Cyclization of Dihydropyridones

Staudinger/aza-Wittig reaction of 6,6,6-trifluoro-5-oxohexanoyl azide with PPh(3) or PBu(3) was examined. A reactive intermediate acyl imine 1 was trapped by methanol. Without nucleophile, isomerized enamide form 3 was obtained. N-Iodobenzoylation and N-haloalkylation of 3 and following radical cyclization via the 5-exo or 6-exo mode gave benzoindolizidinone, indolizidinone, and quinolizidinone derivatives 10-14, which have a trifluoromethyl group at the bridgehead position adjacent to nitrogen. Although LiAlH(4) reduction of 10 and 11 gave a mixture of saturated benzoindolizidine 15 and amino alcohol 16, reduction with BH(3)/THF selectively gave the desired 15 and indolizidine 17 from 13.     

Synthesis of chitosan resin possessing 3,4-diamino benzoic acid moiety for the collection/concentration of arsenic and selenium in water samples and their measurement by inductively coupled plasma-mass spectrometry

A chitosan resin functionalized with 3,4-diamino benzoic acid (CCTS-DBA resin) was newly synthesized by using a cross-linked chitosan (CCTS) as base material. The adsorption behavior of trace amounts of elements on the CCTS-DBA resin was examined by the pretreatment with a mini-column and measurement of the elements by inductively coupled plasma-Mass spectrometry (ICP-MS). Arsenic(V) could be retained on the CCTS-DBA resin at pH 3 as an oxoanion of H₂AsO₄⁻. Selenium(VI) is strongly adsorbed at pH 2 and pH 3 as an oxoanion of SeO₄²⁻, while selenium(IV) as HSeO₃⁻ is adsorbed on the resin at pH 3. The sorption capacities are 82, 64, and 88 mg g⁻¹resin for As(V), Se(IV), and Se(VI), respectively. The effect of common anions and cations on the adsorption of As(V), Se(IV), and Se(VI) were studied; there was no interference from such anionic matrices as chloride, sulfate, phosphate, and nitrate up to 20 ppm, as well as from such artificial river water matrices as Na, K, Mg, and Ca after passing samples through the mini-column containing the resin. The CCTS-DBA resin was applied to the collection of arsenic and selenium species in bottled drinking water, tap water, and river water.