Kinetic Study of 1-β-Cyanoethyl Aziridine for Ring-Opening Polymerization Initiated with Alkyl Sulfate

The kinetics of the cationic polymerization of 1-β-cyanoethyl aziridine initiated 3-hydroxy- 1-propane sulfonic acid sultone and methyl tosylate have been studied. The course of polymerization involved the propagation stage and termination reaction due to the reaction between the growing chain and imino groups in the polymer chain. The propagation constants and termination constants were obtained. The enthalpies of activation for the propagation and termination reactions are ΔH_p? = 12.9 kcal/mol and ΔH_t? = 12.4 kcal/mol, and the entropies of activation are ΔS_p? = -31 cal/deg·mol and ΔS_t? = -39 cal/deg·mol. Otherwise, the polymerization initiated with methyl tosylate involved an early stage which was initiated very quickly.     

Synthesis and Properties of Phosphorus-Containing Aromatic Polyethers

The phosphorus-containing aromatic polyethers were prepared from bis(p-chlorophenyl)phenylphosphine oxide (BCPO) with the sodium salt of several bisphenols by high temperature solution polycondensation. The best result (yield 84%, n _sp /c = 0.15) was obtained from BCPO with bisphenol A (BPA) in dimethyl sulfoxide. However, the polymerization in the solvents such as N, N′-dimethyl-2-pyrrolidone, hexamethylphosphoramide, and N,N′-dimethylformamide, and the polymerization with the other bisphenols HO-C₆H₄-X-C₆H₄?OH, where X = CO, S0₂, CH₃P(O), C₆H₅P(O) in place of BPA gave gumlike polymers. The polymer prepared from BCPO and BPA did not decompose up to ca. 300°C under air or nitrogen atmosphere, but it decomposed slowly at 300–520°C, and decomposed rapidly at 520–540°C. The activation energy (δE) for the maximum rate of weight loss was 47.8 kcal/mole.     

DNA sensor: A novel electrochemical gene detection method using carbon electrode immobilized DNA probes

Abstract

The authors have developed a novel, rapid, convenient, and specific gene detection method, named the ‘DNA sensor,’ using a graphite electrode loaded with DNA probes. Synthesized oligonucleotide (5-TGCAGTTCCGGTGGCTGATC-3′) complementary to oncogene v-myc was employed for a model probe. The oligonucleotide was chemically adsorbed on a basal plane pyrolytic graphite (BPPG) electrode. The sensor was able to be applied to a hybridization reaction (40°C) in a linearized pVM623 solution carrying the Pst I fragment of v-myc (1.5 kbp).

After the hybridization reaction, the sensor was immersed into an acridine orange solution (1 μM) and washed with a phosphate buffer (pH 7.0). Acridine orange intercalated between base pairs of the formed double stranded DNAs on the electrode. The anodic peak potential of acridine orange that interacted with the DNAs on the electrode was measured. The positive shift of the peak potential increased in proportional to the pVM623 concentration in the hybridization reaction. 10^?1 g/ml of pVM623 was able to be detected in the buffer solution using the sensor. This gene detection was completed within an hour.     

Discovery of Oxysterol-Derived Pharmacological Chaperones for NPC1: Implication for the Existence of Second Sterol-Binding Site

1. Download : Download high-res image (181KB)
2. Download : Download full-size image

Highlights? Niemann-Pick disease type C is caused by folding defect in NPC1 protein ? Oxysterols and chemically optimized derivatives act as pharmacological chaperones ? Defects in localization, stability, maturation, and function were corrected in cell ? These derivatives bind to second sterol-binding site on NPC1 protein     

Fast and quantitative analysis of branched-chain amino acids in biological samples using a pillar array column

In this study, a fast and quantitative determination method for branched-chain amino acids (BCAAs), namely leucine, isoleucine, and valine, was developed using a pillar array column. A pillar array column with low-dispersion turns was fabricated on a 20?×?20-mm² microchip using multistep ultraviolet photolithography and deep reactive ion etching. The BCAAs were fluorescently labeled with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), followed by reversed-phase separation on the pillar array column. The NBD derivatives of the three BCAAs and an internal standard (6-aminocaproic acid) were separated in 100 s. The calibration curves for the NBD-BCAAs had good linearity in the range of 0.4–20 μM, using an internal standard. The intra- and interday precisions were found to be in the ranges of 1.42–3.80 and 2.74–6.97 %, respectively. The accuracies for the NBD-BCAA were from 90.2 to 99.1 %. The method was used for the analysis of sports drink and human plasma samples. The concentrations of BCAAs determined by the developed method showed good agreements with those determined using a conventional high-performance liquid chromatography system. As BCAAs are important biomarkers of some diseases, these results showed that the developed method could be a potential diagnostic tool in clinical research.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Highly meso-Diastereoselective Pinacol Coupling of Aromatic Aldehydes Mediated by Al Powder/Copper Sulfate in Water

Pinacol-type coupling reaction products presenting a high meso-diastereoselectivity (the ratio dl/meso was 4/96 up to 1/99) were obtained in fair to good yields (24–69%) using several aromatic aldehydes as starting materials and aluminium powder/copper sulfate as catalysts, in water, under reflux conditions.     

Ni-catalyzed α-arylation of secondary α-bromo-α-fluoro-β-lactam: cross-coupling of a secondary fluorine-containing electrophile

A highly diastereoselective cross-coupling reaction of an α-bromo-α-fluoro-β-lactam with a wide range of aryl Grignard reagents was catalyzed by Ni/bis(oxazoline) in yields of up to 98%. The product was obtained diastereoselectively as an anti-isomer. This is the first successful α-arylation of an α-fluoro-β-lactam to produce diverse α-aryl-α-fluoro-β-lactams.     

Mechanistic study of asymmetric Michael addition of malonates to enones catalyzed by a primary amino acid lithium salt

A mechanistic study was carried out for the asymmetric Michael addition reaction of malonates to enones catalyzed by a primary amino acid lithium salt to elucidate the origin of the asymmetric induction. A primary β-amino acid salt catalyst, O-TBDPS β-homoserine lithium salt, exhibited much higher enantioselectivity than that achieved with the corresponding catalysts derived from α- and γ-amino acids for this reaction. Detailed studies of the transition states with DFT calculations revealed that the lithium cation and carboxylate group of the β-amino acid salt catalyst have important roles in achieving high enantioselectivity in the Michael addition reaction of malonates to enones.     

Invited Lecture. Ferroelectric liquid crystalline polymers and related model compounds with a low–moderate degree of polymerization

Abstract

Ferroelectric liquid crystalline polymers (FLCPs) with a low-moderate degree of polymerization were synthesized. These had a comb structure; the main chain was polyacrylate and the side chain consisted of a flexible spacer, a core and an optically active chiral end group. They exhibited electro-optic switching times ranging from a few milliseconds to a few seconds in the S*_c phase. As the molecular weight M _n increased, the range of the S*_c shifted to higher temperatures. At a given temperature, the switching time increased with M _n .

Spontaneous polarizations P _s , apparent cone angles 2θ, electro-optic switching times τ and rotational viscosities η of some polyoxyethylene FLCPs and corresponding low molecular weight ferroelectric liquid crystal materials (FLCs) were also measured. This is the first report of polyoxyethylene FLCPs. There was no significant difference in P _s and 2θ, which shows that the arrangement of the side chains in the FLCP is similar to that of the molecules in ordinary FLC. On the contrary, τ and η for the FLCPs were 10²–10³ times as large as those for FLCs. The rotational viscosity of the FLCP was mainly dependent on the side chain structure rather than on the spacer. Therefore collisions between adjacent side chains cause large η values in FLCPs rather than hindrance to side chain gyration due to the spacer group. By combining FLCPs with ITO-coated plastic substrates, a large area matrix driven display has been made. Although an improvement in switching time is still needed, a flexible and lightweight display like a sheet of paper will be available in the near future.