Development of Plasma Window for gas charge stripper at RIKEN RIBF

A differential pumping system with a Plasma Window (PW) has been developed for an application to a window-less He gas charge stripper. A PW with Southern Methodist University design was newly fabricated and tested off-line for evaluation of differential pumping efficiency. Switching gases for plasma seed from Ar to He was tested. It was found that the PW reduced the pressure at the first differential pumping section to 1/13 for Ar and to 1/17 for He, comparing with differential pumping without PW. At the second pumping section, the pressures were drastically reduced to 1/160 and to 1/4,520 for Ar and He, respectively. These pressure reduction factors indicate that one differentially pumped stage could be removed from a conventional differential pumping system.     

Mineral Composition of Seawater Bittern Nigari Products and Their Effects on Changing of Browning and Antioxidant Activity in the Glucose/Lysine Maillard Reaction

Seawater bittern (nigari) is a concentrated solution remaining after the crystallization process of salt that has been used as a coagulant for tofu. Recently, various nigari products are distributed in the East Asia. To clarify the properties of nigari products, major mineral composition of six nigari products was determined. Then, effects of the nigari on the browning and antioxidant activity during the glucose/lysine Maillard reaction were investigated. Though the predominant cation was Mg²⁺, the content was varied by each product (0.88–6.49 mol/L). The other major ion contents were also varied. Each 0.5 mol/L of d-glucose and l-lysine were incubated with the nigari (5–50 % (v/v)) or nigari-related salts (1 or 2 mol/L). The browning (OD at 465 nm) and antioxidant activity (1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging capacity and ferrous-reducing power) were increased remarkably by the nigari containing high Mg²⁺ content. The browning tended to be high with sulfates (Na₂SO₄, (NH₄)₂SO₄). On the other hand, high content of MgCl₂ decreased slightly the browning and antioxidant activity. These results suggest that the reaction and antioxidant activities were affected not only by salinity and cations but also by anions and other elements in the nigari.     

Poly(2,5-dimethoxyaniline) film coating for corrosion protection of iron

A poly(2,5-dimethoxyaniline) (PDMA) film was coated on the iron surface by the electropolymerization of 2,5-dimethoxyaniline in neutral buffer solution (pH?6.86). The PDMA film strongly adhered to the surface because of the polar methoxy groups of the PDMA molecules. The fact that no electrochemical response of the PDMA film-coated iron electrode to dissolved Fe²⁺ exhibited that the PDMA film was less permeable to dissolved species, acting as a diffusion barrier against agents causing corrosion such as H₂O and O₂. The PDMA film coating greatly lowered the anodic current peak ascribed to the anodic dissolution of iron and the corrosion current in strongly acidic medium, 0.5?M H₂SO₄ aqueous solution (1?M?????mol?dm^??) as well as neutral medium (pH?6.86). The high anti-corrosion ability was due to a hybrid effect of the PDMA film not only as the diffusion barrier, but also as an in situ oxidant in spite of the slight redox activity of PDMA. In addition, the PDMA film is much more durable and adhesive than polyaniline film against over-oxidation.     

Electroreduction of tetra-coordinate phosphonium derivatives; one-pot transformation of triphenylphosphine oxide into triphenylphosphine

Electroreduction of triphenylphosphine dichloride in acetonitrile was performed successfully in an undivided cell fitted with an aluminium sacrificial anode and a platinum cathode, wherein Al³⁺, which was electrogenerated at the anode would react as a Lewis acid with triphenylphosphine dichloride to afford tetra-coordinate chlorotriphenylphosphonium species and subsequent two-electron reduction at the cathode would give triphenylphosphine. One-pot transformation of triphenylphosphine oxide to triphenylphosphine was achieved successfully by the treatment of triphenylphosphine oxide with oxalyl chloride and subsequent electroreduction. In a similar manner, some tetra-coordinate triphenylphosphonium species derived from triphenylphosphine oxide were reduced electrochemically to triphenylphosphine in moderate yields.     

Synthesis and characterization of nanocrystalline MgAl2O4 spinel by polymerized complex method

Ultrafine MgAl₂O₄ powder has been synthesized by a polymerized complex method. Heating of a precursor solution containing citric acid (CA), ethylene glycol (EG) and Mg and Al salts with a molar ratio of Mg/Al/CA/EG=1/2/8/32 at 180°C produced a transparent polymeric gel, which have been characterized by FT-IR spectroscopy and TG/DTA. The organic fraction was removed by controlled thermal treatments (350–1200°C) whereby the bimetallic oxide was formed. XRD analysis showed the presence of MgAl₂O₄ at 600°C. TEM observation showed that the spherical nanosized powders with good uniformity was obtained. Furthermore, these powders showed excellent sinterability, relative density up to 99.8% was achieved when sintered at 1550°C for 3 h in air without any sintering additive.     

磁场构型的影响及用于RIKEN的RIBF项目的新型ECR离子源

We measured the main plasma parameters(density of electron,temperature of electron and ion confinement time)and beam intensity of various heavy ions as a function of B_(min).The B_(min) strongly affects the field gradient at the resonance zone,consequently the plasma parameters and beam intensity are changed. Based on these experimental results,we started to construct new 18GHz ECRIS and make a detailed design of the 28GHz SC-ECRIS for RIKEN RI beam factory project.     

Raman characteristics of carbon nitride synthesized by nitrogen-ion-beam-assisted pulsed laser deposition

Raman characteristics of carbon nitride films synthesized by nitrogen-ion-beam-assisted pulsed laser deposition were investigated. In addition to the D (disorder) band and G (graphitic) band commonly observed in carbon nitride films, two Raman bands located at 1080–1100 and 1465–1480 cm^-1 were found from our carbon nitride films. These two bands were well matched with the predicted Raman frequencies for βC₃N₄ and the observed Raman bands reported for carbon nitride films, indicating their relation to carbon-nitrogen stretching vibrations. Furthermore, the relative intensity ratio of the two Raman bands to the D and G bands increased linearly with increasing nitrogen content of the carbon nitride films. Received: 30 October 2000 / Accepted: 5 February 2001 / Published online: 2 October 2001