Effect of surface-perturbed intermolecular interaction on adsorption of simple gases on a graphitized carbon surface

In this paper, we investigate the effect of the solid surface on the fluid-fluid intermolecular potential energy. This modified fluid-fluid interaction energy due to the inducement of a solid surface is used in the grand canonical Monte Carlo (GCMC) simulation of various noble gases, nitrogen, and methane on graphitized thermal carbon black. This effect is such that the effective interaction potential energy between two particles close to surface is less than the potential energy if the solid substrate is not present. With this modification the GCMC simulation results agree extremely well with the experimental data over a wide range of pressures while the simulation results with the unmodified potential energy give rise to a shoulder near the neighborhood of monolayer coverage and the significant overprediction of the second and higher layer coverages. In particular the unmodified GCMC results exhibit very sharp change in those higher layers while the experimental data have a much gradual change in the uptake. We will illustrate this theory with adsorption data of argon, xenon, neon, nitrogen, and methane on graphitized thermal carbon black.     

Sensitive determination of bisphenol A and alkylphenols by high performance liquid chromatography with pre-column derivatization with 2-(4-carboxyphenyl)-5,6-dimethylbenzimidazole

A new and sensitive high-performance chromatographic method for the determination of bisphenol A and 8 alkylphenols with fluorescence detection is reported. Each phenol was derivatized by reaction with 2-(4-carboxyphenyl)-5,6-dimethylbenzimidazole at 40 degrees C for 60 min. The fluorescence derivatives were separated on a Wakosil 5C18 column (4.0 i.d. x 300 mm, 5 microm) with methanol:water (10:90) as mobile phase (detection wavelength: lambda(ex) 336 nm, lambda(em) 440 nm). The detection limits were in the range of 0.1-10.0 pg/mL in serum. The calibration graphs were linear to 1.0 microg/mL. The relative standard deviations were 7.2-8.9%, respectively. The proposed method was applied to the determination of bisphenol A in mother and infant rat serum.     

Control of separation selectivity in micellar electrokinetic chromatography by modification of the micellar phase with solubilized organic compounds

On the basis of the data on the distribution of various neutral solutes between sodium dodecyl sulfate (SDS) micelles and water, the control of separation selectivity in micellar electrokinetic chromatography (MEKC) by modification of the micellar phase with organic additives has been proposed and applied to the separation of simple model compounds. It was found that the distribution constants between the micelles and water (K_d,mc), which were determined by means of MEKC, of the solutes possessing hydrophilic functional groups are much larger than those between heptane and water (K_d,hep), whereas the K_d,mc values of the solutes possessing no hydropholic groups are comparable to their K_d,hep values. This indicates that the former solutes are preferentially solubilized in the Stern layer of the micelles and that the latter are located in the hydrocarbon core. In MEKC separations of aromatic compounds and metal acetylacetonates, considerable changes in separation selectivity were caused by the addition of compounds possessing both hydrophilic functional groups such as alcohols, phenol and ketones to the SDS micellar solution. The variations of the retention factors of the analytes could be explained in terms of saturation of the solubilization sites in the Stern layer with the modifiers, specific interaction of the modifiers with the analytes via hydrogen bonding in the micelles, and expansion of the core volume with the hydrocarbon parts of the modifiers. Such effects of the micellar modification could improve the resolution as well as the selectivity of MEKC separations.     

Concentrated reverse micelles in a random graft block copolymer system: structure and in-situ synthesis of silver nanoparticles

The structure and rheological properties of a poly(dimethylsiloxane)-graft-poly(oxyethylene) copolymer at high concentrations in block-selective solvents were studied by small-angle X-ray scattering (SAXS) and rheometry. Analysis of SAXS data indicates that quasispherical, reverse micellar aggregates (with no ordered packing) are present in concentrated solutions of the copolymer in nonpolar solvents, and that upon addition of water, the size of such aggregates increases due to the solubilization inside the micellar cores. The viscosity of concentrated polymer solutions increases exponentially as water is added, and finally, viscoelastic, gel-like behavior is found in the vicinity of the phase separation limit. It was found that small silver nanoparticles with an average diameter of ≈3 nm can be synthesized inside the copolymer aggregates without the need of a reducing agent; namely, particles embedded in a viscoelastic matrix are obtained. The synthesis seems to follow first-order kinetics. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

New efficient route for solid-phase synthesis of benzimidazole derivatives

A simple and efficient method for the solid-phase synthesis of benzimidazole libraries is described. Monoalkylation of various o-phenylenediamines on resin-bound bromoacetamide proceeded smoothly to give the monoalkyl resin-bound o-phenylenediamines in high yields. Subsequent cyclization of the diamines with various aldehydes afforded solid-supported benzimidazoles. Cleavage from the resin gave benzimidazoles in good yields. The present method enabled the introduction of the diversity on the benzene ring of imidazoles. Azabenzimidazoles, such as 4-azabenzimidazoles, 5-azabenzimidazoles, and purines, were also synthesized in good yields with high purities by the same procedure.     

Inclusion Complex Formation of Thiacalix[4]arene and Xe in Aqueous Solution Studied by Hyperpolarized 129Xe NMR

The inclusion complex formation of 4-sulfothiacalix[4]arene sodium salt (STCAS) and Xe has been investigated by using hyperpolarized ¹²⁹Xe NMR spectroscopy. Our new continuous-flow type hyperpolarizing system has advantageous capabilities that can supply hyperpolarized gases continuously and directly to a sample solution in a NMR tube. Consequently saturated Xe concentration in the aqueous solution of STCAS is maintained during the NMR experiment, and ¹²⁹Xe NMR spectra can be obtained in remarkably short time. STCAS concentration dependence of ¹²⁹Xe chemical shift has been analyzed in an elaborated way by a computer method as well as a simple graphic method that we have proposed. The association constant K:13.6±0.8 M⁻¹ at 25 °C was obtained, and further analysis of the temperature dependence has successfully given thermodynamic parameters of enthalpy (ΔH) and entropy (ΔS) for the inclusion complex formation: ΔH = −11.9±1.9 kJ mol⁻¹ and ΔS = −17.4±5.8 JK⁻¹ mol⁻¹. The energetic aspects of complex formation are discussed from the size effect and from the molecular theory of standard entropy, and a release of definite number of water molecules from STCAS cavity is suggested in the inclusion complex formation with Xe.     

Ion-pair adsorption film colorimetry — A new simple method for ppb level of aluminum ion in water sample

A new, highly sensitive and simple colorimetric method for trace aluminum(III) with 2,2-dihydroxyazobenzene, H₂L, is described, based on the ion-pair adsorption of the anionic Al chelate, [A1L₂ ^–, with crystal violet cation, CV⁺, on the surface of Polyvinylchloride film plasticized with dioctylphthalate. The blue violet species, CV⁺[A1L₂]^–, is enriched onto the transparent film, leading to a remarkable enhancement of the sensitivity, and the detection limits are 3 ng/ml by spectrophotometry and 5 ng/ml by visual colorimetry, respectively. Using spectrophotometer, a linear calibration curve is obtained over the concentration range of 0 to 50 ng/ml of Al. Further, the color system, consisting of red ([A1L₂]^–), yellow (H₂L), and blue violet (CV⁺), gave clear color changes suitable for visual determination of aluminum with an applicable range of 0 to above 3000 ng/ml. The four different color zones are khaki for 0–5 ng/ml, reddish-brown for 5–200 ng/ml, blue violet for 200 ng/ml-3g/ml, and colorless for more than 3g/ml. The proposed method has been successfully applied for the determination of aluminum in tap waters.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at     

A mixed version of Menger's theorem

An(a, b)-n-fan means a union ofn internally disjoint paths. Menger's theorem states that a graphG has an(a, b)-n-fan if and only ifG isn-connected betweena andb. We show thatG contains edge-disjoint(a, b)-n-fans if and only if for anyk withk0min{n–1, |V(G)|–2} and for any subsetX ofV(G)-{a, b} with cardinalityk, G-X is (n-k)-edge-connected betweena andb.     

Evolution of host-parasitoid network through homeochaotic dynamics

Host-parasitoid systems with evolving mutation rates are studied. By increasing the growth rate of hosts, the diversity of both species is maintained dynamically. For the lower growth rate, diversity is brought about by mere parasitism. The average mutation rate for parasites is elevated to a high value, while that for hosts is suppressed at a low level. For the higher growth rate, the mutation rates for both hosts and parasites are elevated to form a symbiotic cluster connected by on-going mutation. This symbiotic state is sustained through a chaotic oscillation keeping some coherency among species. For a flat landscape for hosts, dynamical clustering of oscillation is observed. Lyapunov spectra of such oscillations show that high dimensional chaos with small positive exponents underlies in the symbiotic state. This weak high dimensional chaos, termed "homeochaos," is essential to the maintenance of symbiosis in ecosystems.