On shadowing: Ordinary and ergodic

The aim of this paper is to introduce the notion of ergodic shadowing for a continuous onto map which is equivalent to the map being topologically mixing and has the ordinary shadowing property. In particular, we deduce the chaotic behavior of a map with ergodic shadowing property. Moreover, we define some kind of specification property and investigate its relation to the ergodic shadowing property.     

Natural radioactivity and radon exhalation rates in building materials used in Egypt

Natural and fabricated building materials commonly used in Egypt were surveyed for both natural radionuclides content and radon exhalation rate. These include raw as well as construction products. Concentration of natural radionuclides in all samples were determined by γ-ray spectroscopy with HPGe detector. For Radon exhalation rate measurements of fabricated samples, the seal can-technique has been applied using CR-39 plastic track detectors. The radiation hazard indices of the total natural radioactivity in the studied samples were estimated. The results were compared with the corresponding results of different countries and were found to be lying within the average world values. Radon exhalation rate in the studied samples varied between 197 (cement brick) and 907 mBq m⁻² h⁻¹ (blast furnace slag cement). The results of this survey suggest that, using blast furnace slag cement for pre-coating the internal walls of buildings in the Urban region of Egypt is discouraged and the replacement of clay brick by cement brick will be more healthy for the public.     

Water vapor adsorption onto activated carbons prepared from cattle manure compost (CMC)

Activated carbons were prepared from cattle manure compost (CMC) using zinc chloride activation. The structural and surface chemical characteristics of CMC-based activated carbons were determined by N₂ adsorption-desorption and Boehm titration, respectively. The water vapor adsorption properties of the prepared activated carbons with various pore structure and surface nature were examined, and the mechanism of water adsorbed onto activated carbon was also discussed. The results show that the adsorption of water vapor on carbons begins at specific active sites at low relative humidity (RH), followed by micropore filling at medium RH through the formation of pentamer cluster of water molecules in the narrow micropores. The water vapor adsorption capacity of activated carbon is predominantly dependent on its pore volume and surface area. Although capillary condensation is not the mechanism for water adsorption onto activated carbon, water can adsorb on narrow mesopore to some extent.     

Attraction behaviour of Anagrus nilaparvatae to remote lemongrass (Cymbopogon distans) oil and its volatile compounds

Utilisation of Anagrus nilaparvatae is a promising and effective method for planthoppers manipulation. Twenty-seven components of remote lemongrass (Cymbopogon distans) oil were identified by GC/MS and nine volatiles were selected for behavioural experiments. In this study, we noted that the remote lemongrass oil was attractive to female A. nilaparvatae at concentrations of 0.1 and 1 mg/L. α-Pinene, β-pinene, eucalyptol, carveol and D-carvone attracted female wasps in the dose-dependent bioassays. Blend 1 (a mixture of eucalyptol, D-carvone, carveol, α-pinene, and β-pinene with ratios of remote lemongrass oil volatiles of 625:80:11:5:3) attracted female wasps at 10 mg/L, while blend 2 (a mixture of the same five volatiles at the same loading ratio) attracted them at 0.1 and 1 mg/L. These results suggested that plant essential oils could be attractants for natural enemies to control pests. The ratios of volatiles in the mixtures affect the attractiveness of the synthetic mixtures.     

Polypyrrole nanotube modified by gold nanoparticles for improving the neural microelectrodes

Journal of Solid State Electrochemistry - High selectivity and low impedance are preferred properties for neural microelectrodes. The localized and controlled release of drugs from the...     

An efficient solvent-free synthesis of 2-(alkylamino)-2-oxo-1-arylethyl-6,12-dioxo-6,12-dihydroindolo[1,2-b]isoquinoline-11-carboxylate derivatives via four-component reaction

Molecular Diversity - A one-pot approach for the synthesis of a new series of 2-(alkylamino)-2-oxo-1-arylethyl-6,12-dioxo-6,12-dihydroindolo[1,2-b]isoquinoline-11-carboxylate derivatives via a...     

Synthesis and characterization of silica-coated Fe3O4 nanoparticle@silylpropyl triethylammonium polyoxometalate as an organic–inorganic hybrid heterogeneous catalyst for the one-pot synthesis of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones

In this study, silica-coated Fe₃O₄ nanoparticle@silylpropyl triethylammonium polyoxometalate catalyst was fabricated and characterized using atomic absorption, inductively coupled plasma optical emission spectrometry, elemental analysis, thermogravimetric analysis, Fourier-transform infrared, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and vibrating sample magnetometry analyses. The activity of this catalyst was examined in the synthesis of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones. The bonding of the polyoxometalate to the surface of the nanoparticles exhibited excellent catalytic activity in this synthesis. Besides, the catalyst showed good reusability and recovery from the reaction mixture. Tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones were synthesized in high yields in the presence of inexpensive supported solid acid catalysts under classical heating conditions.     

Modeling and active control of chatter vibrations of piezoelectric stacked machining arm in micro-turning process

Self-excited vibrations known as chatter are considered as the most detrimental issue in micro-turning processes. Occurring unpredictably, they adversely affect the tool life, productivity rate and surface quality of the machining processes. In this paper, a novel machining arm is modeled as a piezoelectric stacked rod which is subjected to a chatter force in the orthogonal micro-turning process. Due to the fact that machining processes are affected by various sources of uncertainties, H_∞ robust control approach is used to suppress the chatter vibrations of the machining arm in the presence of tool wear and dynamic model parameter variations. Also, input control force of the system is provided by exciting the input voltage of piezoelectric layers of the rod. In order to be certain that the designed controller succeeds in suppressing vibrations of the effective structural modes, behavior of the first three modes of vibrations are considered in the final response of the machining arm. In the following, performance of the robust H_∞ controller is compared with a modified PID controller. Simulation results show that the H_∞ controller improves the robustness and performance of the system against uncertainties. The PID controller extends the stability region of the sharp tool and fails to achieve this purpose for the worn tool although its performance is acceptable in suppressing chatter vibrations.

     

Emission and performance analysis of DI diesel engines fueled by biodiesel blends via CFD simulation of spray combustion and different spray breakup models: a numerical study

Journal of Thermal Analysis and Calorimetry - In the current study, computational fluid dynamics code was used to perform 3D simulation of mixture formation and combustion of biodiesel fuel spray...     

Cyclicity of the unramified Iwasawa module

For a number field k and a prime number p, let k _?? be the cyclotomic Z _p -extension of k with finite layers k _n . We study the finiteness of the Galois group X _?? over k _?? of the maximal abelian unramified p-extension of k _?? when it is assumed to be cyclic. We then focus our attention to the case where p?=?2 and k is a real quadratic field and give the rank of the 2-primary part of the class group of k _n . As a consequence, we determine the complete list of real quadratic number fields for which X _?? is cyclic non trivial. We then apply these results to the study of Greenberg??s conjecture for infinite families of real quadratic fields thus generalizing previous results obtained by Ozaki and Taya.