Frequency measuring system using mirror gap stabilized Fabry-Perot interferometer

The mirror gap of a Fabry-Perot interferometer was stabilized with two laser diodes; one locked to the line frequency 385,243,555.14445 MHz of the F=3<--1 in 5D(3/2)<--5S(1/2) (87Rb) and the other to the 385,284,566.3663 MHz of the F=4<--2 in 5D(5/2)<--5S(1/2) (87Rb) [Opt. Commun. 102 (1993) 432]. The length of the mirror gap was adjusted to generate the zero-cross points simultaneously at both of the two line positions. The fringe signals obtained from an interferometer thus stabilized can be used as frequency markers having accuracies of the order of 10(10) depending on the finesse of the interferometer used. Based on measurement using Cs D1 hyperfine lines reported by Udem et al. [Phys. Rev. Lett. 82 (1999) 3568], the uncertainty of markers in the region 50 THz apart from the reference lines is +/- 5 MHz.     

Synthesis and self-aggregation of cyclic alkynes containing helicene

[structure: see text]. All stereoisomers of a cyclic alkyne containing three helicene units, 1,12-dimethylbenzo[c]phenanthrene, are synthesized using a building block. Isomeric [3 + 3]cycloalkynes aggregate in organic solvents. Vapor pressure osmometry reveals dimer formation of (M,M,M)-[3 + 3]cycloalkynes in chloroform and benzene at concentrations above 2 mM. No higher aggregation is observed. The chirality of helicenes plays an important role in self-aggregation, and diastereomeric (M,P,M)-[3 + 3]cycloalkyne forms a dimer only above 15 mM. Aggregation of racemic (M,M,M)-[3 + 3]cycloalkyne or (M,P,M)-[3 + 3]cycloalkyne is much weaker than that of a single enantiomer.     

Copolymerization of optically active N-bornylmaleimide with vinyl monomers

Optically active N-bornylmaleimide (NBMI) was copolymerized with styrene, methyl methacrylate, and vinylidene chloride with a free-radical catalyst to obtain optically active copolymers. The monomer reactivity ratios for the radical copolymerization of NBMI (M₂) with styrene, methyl methacrylate, and vinylidene chloride were: ST-NBMI, r₁ = 0.13, r₂ = 0.05; MMA-NBMI, r₁ = 2.02, r₂ = 0.16; VCl₂-NBMI, r₁ = 1.15, r₂ = 0.47. The Q-e values for NBMI were Q₂ = 0.48 and e₂ = +1.47. The specific rotation and optical rotatory dispersion of these copolymers were measured. The correlation between the specific rotation and composition of these copolymers was not linear. The value of λ_c for each copolymer was independent of the copolymer composition and the comonomer, being 260 mμ for the St-NBMI system, 262 mμ for the MMA-system, and 260 mμ for the VCl₂-NBMI system. The effects of solvents and temperature on the specific rotation of these copolymers were investigated.     

Synthesis of photoreactive polyimide having indan structure

Polyimide containing an indan unit and alkyl moiety with a high molecular weight was prepared from 5,7‐diamino‐1,1,4,6‐tetramethylindan and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride. This polyimide was amorphous and soluble in common organic solvents, such as tetrahydrofuran, chloroform, and cyclopentanone. Thermogravimetry of the polyimide showed good thermal stability, indicating that a 10% weight loss of the polyimide was observed at 500 °C in nitrogen. The glass‐transition temperature of the polyimide was not observed by DSC measurement between room temperature and 400 °C at a heating rate of 10 °C/min (Apparatus: DSC3100 MAC Science Co., Ltd.). Transparency of the polyimide at 365 nm was 80%. The polyimide acted as a photosensitive resist of negative type by UV radiation. The resist had a sensitivity of 31 mJ/cm² and a contrast of 2.3 when it was developed with cyclopentanone at room temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 423–428, 2002     

UV-Vis, NMR, and time-resolved spectroscopy analysis of photoisomerization behavior of three- and six-azobenzene-bound tris(bipyridine)cobalt complexes

The photoisomerization properties of tris(bipyridine)cobalt complexes containing six or three azobenzene moieties, namely, [Co(II)(dmAB)3](BF4)2 [dmAB = 4,4'-bis[3'-(4'-tolylazo)phenyl]-2,2'-bipyridine], [Co(III)(dmAB)3](BF4)3, [Co(II)(mAB)3](BF4)2 [mAB = 4-[3' '-(4' '-tolylazo)phenyl]-2,2'-bipyridine], and [Co(III)(dmAB)3](BF4)3, derived from the effect of gathering azobenzenes in one molecule and the effect of the cobalt(II) or cobalt(III) ion were investigated using UV-vis absorption spectroscopy, femtosecond transient spectroscopy, and 1H NMR spectroscopy. In the photostationary state of these four complexes, nearly 50% of the trans-azobenzene moieties of the Co(II) complexes were converted to the cis isomer, and nearly 10% of the trans-azobenzene moieties of the Co(III) complexes isomerized to the cis isomer, implying that the cis isomer ratio in the photostationary state upon irradiation at 365 nm is controlled not by the number of azobenzene moieties in one molecule but rather by the oxidation state of the cobalt ions. The femtosecond transient absorption spectra of the ligands and the complexes suggested that the photoexcited states of the azobenzene moieties in the Co(III) complexes were strongly deactivated by electron transfer from the azobenzene moiety to the cobalt center to form an azobenzene radical cation and a Co(II) center. The cooperation among the photochemical structural changes of six azobenzene moieties in [Co(II)(dmAB)3](BF4)2 was investigated with 1H NMR spectroscopy. The time-course change in the 1H NMR signals of the methyl protons indicated that each azobenzene moiety in [Co(II)(dmAB)3](BF4)2 isomerized to a cis isomer with a random probability of 50% and without interactions among the azobenzene moieties.     

Dipole moments of (styrene-p-chlorostyrene) triblock copolymers in solutions

(Styrene-p-chlorostyrene) triblock copolymers of the ABA and BAB types (A—polystyrene; B—poly-p-chlorostyrene) were prepared by anionic polymerization and their conformational behaviours in solutions were studied from measurements of the dipole moments. Two solvents, toluene and cumene, were used for the study; toluene is a good solvent for both polystyrene and poly-p-chlorostyrene whereas cumene is a selective solvent, good for polystyrene but poor for poly-p-chlorostyrene. It was found that the dipole moments of the block copolymers measured in toluene are the same for the ABA and BAB copolymers; in cumene however the dipole moment of the BAB copolymer is smaller than that of the ABA copolymer. The results give an additional support to our previous conclusion that the conformation of the block copolymers in a good solvent such as toluene could be approximated with a pseudo-random coil form; in a selective solvent, however, some anomalies take place in the conformation of the block copolymers, as deduced from intrinsic viscosity, osmotic pressure and light scattering measurements.     

Synthesis and antifungal activities of a series of (1,2-disubstituted vinyl)imidazoles.

A series of vinylimidazoles containing a hetero atom such as sulfur or oxygen at a beta-position of the vinyl group was prepared and the antifungal activities were tested. It was found that sulfur-substituted derivatives such as (E)-1-[2-(methylthio)-1-[2-(pentyloxy)phenyl]ethenyl]-1H-imidazole (5a-5) and (E)-1-[1-[2-(hexyloxy)phenyl]-2-(methylthio)ethenyl]-1H-imidazole (5a-6) showed excellent antifungal activities against dermatophytes and yeast cells. The stereochemistry of the hydrochloride salt of 5a-5 was determined by X-ray crystallography. The structure-activity relationships were discussed.     

Metal-containing initiator systems. IV. Polymerization of methyl methacrylate by systems of some activated metals and organic halides

A study of the polymerization of methyl methacrylate initiated by the binary systems of some activated metals and organic halides has been made. It was found that the initiator activities of these systems were greatly dependent on the kind and the preparation or activation method of the metals (i.e., oxidation potential, surface area, and purity), and also on the kind of organic halides (i.e., bond-dissociation energy of their carbon–halogen bonds). From the kinetic studies of the polymerization at 60°C with the system reduced nickel–carbon tetrachloride, the rate of polymerization was found to be proportional to the monomer concentration and to the square root of concentration of both nickel and carbon tetrachloride at the lower concentration range of carbon tetrachloride, indicating that the system induced the radical polymerization. A similar conclusion was also obtained from the copolymerization with styrene with this system at 60°C, i.e., the resulting copolymer composition curve was in agreement with that obtained with azobisisobutyronitrile (AIBN). The apparent overall activation energy for the methyl methacrylate polymerization with this system was estimated to be 7.5 kcal/mole, which was considerably lower than that with AIBN. On the basis of the results obtained, an initiation mechanism for the polymerization with these initiator systems is presented and discussed.     

Structure reinvestigation of gelsemoxonine,a constituent of Gelsemium elegans,reveals a novel,azetidine-containing indole alkaloid

[structure: see text] The structure of gelsemoxonine, isolated from Gelsemium elegans Benth., was revised to be a novel oxindole alkaloid having an azetidine unit. A new alkaloid, 14,15-dihydroxygelsenicine, which was presumed to be a biosynthetic precursor of gelsemoxonine, was also isolated.     

Cobaltporphyrin‐adsorbed carbon black: highly efficient electrocatalysts for oxygen reduction

meso‐Substituted cobalt porphyrins adsorbed on carbon black were prepared as catalysts for the electroreduction of O₂. The catalyst, which was prepared by using a homogenizer in mixing cobalt tetraethylporphyrin and carbon black, gave rise to electroreduction of O₂ at a remarkably positive potential (E_p = 0.45 V versus saturated calomel electrode (SCE)) and showed a high selectively for the four‐electron reduction (n = 3.8). Electrochemical study and extended X‐ray absorption fine structure (EXAFS) analysis revealed that the adsorbed face‐to‐face dimeric aggregates of cobalt porphyrin molecules were highly efficient catalysts for electroreduction of O₂. Copyright © 2005 John Wiley & Sons, Ltd.