In situ small-angle neutron scattering and rheological measurements of shear-induced gelation

The microscopic structure of shear-induced gels for a mixed solution of 2-hydroxyethyl cellulose and nanometer-size spherical droplets has been investigated by in situ small-angle neutron scattering (SANS) with a Couette geometry as a function of shear rate gamma. With increasing gamma, the viscosity increased rapidly at gamma approximately 4.0 s(-1), followed by a shear thinning. After cessation of shear, the system exhibited an extraordinarily large steady viscosity. This phenomenon was observed as a shear-induced sol-gel transition. Real-time SANS measurements showed an increase in the scattering intensity exclusively at low scattering angle region. However, neither orientation of polymer chains nor droplet deformation was detected and the SANS patterns remained isotropic irrespective of gamma. It took about a few days for the gel to recover its original sol state. A possible mechanism of gelation is proposed from the viewpoint of shear-induced percolation transition.     

Synthesis, structural transformation, thermal stability, valence state, and magnetic and electronic properties of PbNiO3 with perovskite- and LiNbO3-type structures

We synthesized two high-pressure polymorphs PbNiO(3) with different structures, a perovskite-type and a LiNbO(3)-type structure, and investigated their formation behavior, detailed structure, structural transformation, thermal stability, valence state of cations, and magnetic and electronic properties. A perovskite-type PbNiO(3) synthesized at 800 °C under a pressure of 3 GPa crystallizes as an orthorhombic GdFeO(3)-type structure with a space group Pnma. The reaction under high pressure was monitored by an in situ energy dispersive X-ray diffraction experiment, which revealed that a perovskit-type phase was formed even at 400 °C under 3 GPa. The obtained perovskite-type phase irreversibly transforms to a LiNbO(3)-type phase with an acentric space group R3c by heat treatment at ambient pressure. The Rietveld structural refinement using synchrotron X-ray diffraction data and the XPS measurement for both the perovskite- and the LiNbO(3)-type phases reveal that both phases possess the valence state of Pb(4+)Ni(2+)O(3). Perovskite-type PbNiO(3) is the first example of the Pb(4+)M(2+)O(3) series, and the first example of the perovskite containing a tetravalent A-site cation without lone pair electrons. The magnetic susceptibility measurement shows that the perovskite- and LiNbO(3)-type PbNiO(3) undergo antiferromagnetic transition at 225 and 205 K, respectively. Both the perovskite- and LiNbO(3)-type phases exhibit semiconducting behavior.     

An approach to control of band gap energy and photoluminescence upon band gap excitation in Pr(3+)-doped perovskites La(1/3)MO3 (M=Nb, Ta):Pr3+

We synthesized polycrystalline pristine and Pr(3+)-doped perovskites La(1/3)MO(3) (M = Nb, Ta):Pr(3+) and investigated their crystal structure, optical absorption, and luminescence properties. The optical band gap of La(1/3)NbO(3) (3.2 eV) is smaller than that of La(1/3)TaO(3) (3.9 eV), which is primarily due to the difference in electronegativity between Nb and Ta. In La(1/3)NbO(3):Pr(3+), the red emission assigned to the f-f transition of Pr(3+) from the excited (1)D(2) level to the ground (3)H(4) state upon band gap photoexcitation (near-UV) was observed, whereas the f-f transition of Pr(3+) with blue-green emission from the excited (3)P(0) level to the ground (3)H(4) state was quenched. On the other hand, in La(1/3)TaO(3):Pr(3+), the blue-green emission upon band gap photoexcitation was observed. Their differences in emission behavior are attributed to the energy level of the ground and excited states of 4f(2) for Pr(3+), relative to the energy levels of the conduction and valence bands, and the trapped electron state, which mediates the relaxation of electron from the conduction band to the excited state of Pr(3+). La(1/3)NbO(3):Pr(3+) is a candidate red phosphor utilizing near-UV LED chips (e.g., λ = 375 nm) as an excitation source.     

Preparation of TiO2 thin films using water-soluble titanium complexes and their photoinduced properties

Titanium dioxide thin films were prepared by using four water-soluble titanium complexes of titanium-lactate, tartalate, malate and salicylate complex solutions. The crystalline phases detected in the films were anatase. The surface microstructures of the four film samples were different in their grain sizes. Photocatalytic decomposition activity of the four films was almost the same, but their photoinduced hydrophilicities were different. The film prepared using titanium-salicylate complex exhibited lower hydrophilic conversion rate than the other films. Grain size and stress yielded to the film are considered to be important factors on the photoinduced hydrophilicity.     

Liquid marbles prepared from pH-responsive sterically stabilized latex particles

Submicrometer-sized pH-responsive sterically stabilized polystyrene (PS) latex particles were synthesized by dispersion polymerization in isopropyl alcohol with a poly[2-(diethylamino)ethyl methacrylate]- (PDEA-) based macroinitiator. These PDEA-PS latexes were extensively characterized with respect to their particle size distribution, morphology, chemical composition, and pH-responsive behavior. Millimeter- and centimeter-sized "liquid marbles" with aqueous volumes varying between 15 μL and 2.0 mL were readily prepared by rolling water droplets on the dried PDEA-PS latex powder. The larger liquid marbles adopted nonspherical shapes due to gravitational forces; analysis of this deformation enabled the surface tension to be estimated. Scanning electron microscopy and fluorescence microscopy studies indicated that flocs of the PDEA-PS particles were adsorbed at the surface of these water droplets, leading to stable liquid marbles. The relative mechanical integrity of the liquid marbles prepared from alkaline aqueous solution (pH 10) was higher than those prepared from acidic aqueous solution (pH 2) as judged by droplet roller experiments. These liquid marbles exhibited long-term stability (over 1 h) when transferred onto the surface of liquid water, provided that the solution pH of the subphase was above pH 8. In contrast, the use of acidic solutions led to immediate disintegration of these liquid marbles within 10 min, with dispersal of the PDEA-PS latex particles in the aqueous solution. Thus the critical minimum solution pH required for long-term liquid marble stability correlates closely with the known pK(a) value of 7.3 for the PDEA stabilizer chains. Stable liquid marbles were also successfully prepared from aqueous Gellan gum solution and glycerol.     

Catalytic asymmetric amination of N-nonsubstituted α-alkoxycarbonyl amides: concise enantioselective synthesis of mycestericin F and G

In an attempt to explore the synthetic utility of a ternary asymmetric catalyst comprising La(NO₃)₃?6H₂O, amide‐based ligand (R)‐ L1 , and D ‐valine tert‐butyl ester H‐D ‐Val‐OtBu, we investigated a catalytic, asymmetric amination of functionalized N‐nonsubstituted α‐alkoxycarbonyl amides using di‐tert‐butyl azodicarboxylate as an electrophilic aminating reagent. A highly functionalized, cyclic N‐nonsubstituted α‐alkoxycarbonyl amide delivered the desired amination product in up to 96 % enantiometric excess, with the requisite functionalities of the polar heads of sphingosines with the appropriate stereochemical arrangement. The rapid asymmetric assembly of these functional groups allowed a concise enantioselective synthetic route to sphingosines to be established with a broad flexibility towards derivative synthesis. These studies have culminated in an efficient catalytic enantioselective total synthesis of immunosuppressive fungal metabolites mycestericin F ( 3 a ) and G ( 3 b ).     

Indomethacin solubilization induced shape transition in CnE7 (n=14,16) nonionic micelles

Shape transitions were examined with regard to the solubilization of the poorly water-soluble drug indomethacin (IMC) in the nonionic surfactants heptaethylene oxide tetradecyl (C14E7) and hexadecyl (C16E7) ethers by means of a dynamic light scattering technique. The cloud points of the pure C14E7 and C16E7 micelles ranged from 58 to 62 degrees C and from 52.1 to 55.6 degrees C, respectively, at surfactant concentrations of 1 to 10 mM. The cloud points of IMC-solubilized micelles increased by approximately 1 to 5 degrees . The sizes of the pure C14E7 micelles were 4 to 14 nm at 20 to 40 degrees C at a concentration of 2 to 20 mM. The apparent hydrodynamic radius (R happ) of pure C16E7 micelles varied with temperature and concentration. C16E7 surfactant formed small spherical micelles at 20 and 25 degrees C at concentrations below 5 mM; the size of the micelles was approximately 5 nm. On the other hand, from 30 to 40 degrees C and at a higher concentration, C16E7 formed elongated cylindrical micelles, and these elongated micelles entangled or overlapped each other. The R happ of the IMC-solubilized C14E7 micelles at 20 to 40 degrees C and of C16E7 micelles at 20 degrees C increased compared to that of pure micelles. On the other hand, the cylindrical micelles of C16E7 decreased in size and turned into spherical ones because of the hydrophobicity between the micelles caused by solubilization of IMC. This phenomenon was confirmed by transmission electron microscope (TEM) images.     

Preconcentration technique for manganese by adsorption onto a tantalum wire for tungsten tube atomizer electrothermal atomization atomic absorption spectrometry

A multi-pumping flow system for the spectrophotometric determination of nitrite and nitrate is described. The determination of nitrite is based on the Griess-Ilosvay reaction. Nitrate can be determined after its on-line reduction to nitrite using hydrazine sulphate in alkaline medium. Calibration was linear up to 3 mg NO₂ ⁻ L⁻¹ with a limit of detection (3s_b/S) of 0.013 mg NO₂ ⁻ L⁻¹ an injection throughput of 55 injections h⁻¹ and a repeatability (RSD) of 0.5% for the direct determination of nitrite. Two calibration graphs within the ranges 0.039–7 mg NO₃ ⁻ L⁻¹ and 0.026–5 mg NO₂ ⁻ L⁻¹ were run for the determination of nitrate and nitrite under reducing conditions, respectively. A limit of detection of 0.039 mg NO₃ ⁻ L⁻¹ was obtained. An injection throughput of 27 injections h⁻¹ and an RSD lower than 1.5% were achieved. The method was successfully applied to the determination of nitrite and nitrate in water samples. Correspondence: Víctor Cerdà, Department of Chemistry, University of the Balearic Islands, Carretera de Valldemossa Km7.5, 07122 Palma de Mallorca, Spain     

Syntheses of a partially benzylated derivative of the anhydro-d-altro-heptulose found in Coriaria japonica A and of its analogs

A partially benzylated derivative of anhydro-d-altro-heptulose found in Coriaria japonica A, which is a synthetically useful unit, was successfully synthesized from a d-mannose derivative by a novel synthetic approach involving the intramolecular O-ketopyranosylation reaction developed by us. This synthetic approach was also applicable to the preparation of its four analogs.     

Fabrication of DNA nanowires by orthogonal self-assembly and DNA intercalation on a Au patterned Si/SiO2 surface

A novel Ru complex bearing both an acridine group and anchoring phosphonate groups was immobilized on a surface in order to capture double-stranded DNAs (dsDNAs) from solution. At low surface coverage, the atomic force microscopy (AFM) image revealed the "molecular dot" morphology with the height of the Ru complex ( approximately 2.5 nm) on a mica surface, indicating that four phosphonate anchor groups keep the Ru complex in an upright orientation on the surface. Using a dynamic molecular combing method, the DNA capture efficiency of the Ru complex on a mica surface was examined in terms of the effects of the number of molecular dots and surface hydrophobicity. The immobilized surface could capture DNAs; however, the optimal number of molecular dots on the surface as well as the optimal pull-up speed exist to obtain the extended dsDNAs on the surface. Applying this optimal condition to a Au-patterned Si/SiO 2 (Au/SiO 2) surface, the Au electrode was selectively covered with the Ru complex by orthogonal self-assembly of 4-mercaptbutylphosphonic acid (MBPA), followed by the formation of a Zr (4+)-phosphonate layer and the Ru complex. At the same time, the remaining SiO 2 surface was covered with octylphosphonic acid (OPA) by self-assembly. The selective immobilization of the Ru complex only on the Au electrode was identified by time-of-flight secondary-ion mass spectrometry (TOF-SIMS) imaging on the chemically modified Au/SiO 2 surface. The construction of DNA nanowires on the Au/SiO 2 patterned surface was accomplished by the molecular combing method of the selective immobilized Ru complex on Au electrodes. These interconnected nanowires between Au electrodes were used as a scaffold for the modification of Pd nanoparticles on the DNA. Furthermore, Cu metallization was achieved by electroless plating of Cu metal on a priming of Pd nanoparticles on the Pd-covered DNA nanowires. The resulting Cu nanowires showed a metallic behavior with relatively high resistance.