Interaction between the end groups and the main chain of conjugated polymers by time-resolved EPR and fluorescence spectroscopy

ABSTRACT

Interaction between a zinc porphyrin (ZnPor) as the end-group and poly(9,9-di-n-octylfluorene-2,7-vinylene) (PFV) as the main chain in a porphyrin end-modified fluorescent conjugated polymer, ZnPFV, was studied by time-resolved electron paramagnetic resonance (EPR) and fluorescence spectroscopy. While fluorescence from the PFV part of ZnPFV showed a spectral profile almost identical to that of a PFV oligomer without end-modification, the emission spectrum of the ZnPor part exhibited a much broader profile compared to that of the reference zinc porphyrin monomer. Based on the analysis of lifetimes and quantum yields, it was found that radiative rate constant of the ZnPor part was enhanced by nearly three times. The observed unusual enhancement in the radiative rate constant was rationalised in terms of a partial π-conjugation between the end group and the main chain, as a result of co-planarisation in fluid solution. On the other hand, the time-resolved EPR spectrum of ZnPFV at 100?K basically showed a similar spectral pattern to that of the reference zinc porphyrin, but with significant differences in zero-field spitting parameters and initial population ratios. The π-system of the excited triplet state is deduced to deviate from D_4h symmetry in the end zinc porphyrin groups. The obtained results show that interaction of the porphyrin end group with the main chain of the polymer significantly influences the excited singlet state properties of the porphyrin, while its triplet state properties were affected to a lesser extent.     

Thiol-terminated hydroxy-functional polymer as a transtab toward polymer latex particles

Hydroxy-functional macrodisulfides have been synthesized by atom transfer radical polymerization of 2-hydroxyethyl methacrylate or 2-hydroxypropyl methacrylate in 2-propanol. Mean degrees of polymerization of the polymer chains beside the disulfide were fixed at 30, 60, and 90; since ATRP has reasonably good living character, the molecular weight distribution is relatively narrow. Furthermore, the macrodisulfides were reduced to synthesize corresponding thiol-terminated polymers with relatively narrow molecular weight distributions. ¹H nuclear magnetic resonance and gel permeation chromatography were used to characterize the macrodisulfides and thiol-terminated polymers in terms of their chemical structure, molecular weight, and polydispersity, respectively. Dispersion polymerizations of styrene using the thiol-terminated hydroxy-functional polymers as a transtab (chain transfer agent + colloidal stabilizer) in ethanol resulted in colloidally stable submicrometer-sized polystyrene latex particles. Scanning electron microscopy, Fourier transform infrared spectroscopy, and elemental microanalysis were used to characterize the particles in terms of their morphologies, particle sizes and their distributions, and chemical compositions.     

Effect of Amines on the Selective Bromination of Some β-Substituted-2-Butenoic Esters

The effect of amines on the selective bromination of some β-substituted-2-butenoic esters is described. The bromination of methyl (Z)-4-t-butyldiphenylsilyloxy-3-methylbutenoate 2 in the presence of DIPEA (N, N-diisopropylethylamine) and the successive treatment of the obtained dibromide with potassium t-butoxide afford the desired Z bromide selectively. But the corresponding E bromide forms exclusively when 2, 6-di-t-butyl-4-methylpyridine is used in the bromination.     

Single‐Electron‐Transfer (SET)‐Induced Oxidative Biaryl Coupling by Polyalkoxybenzene‐Derived Diaryliodonium(III) Salts

Metal‐free oxidative C? C coupling by using polyalkoxybenzene‐derived diaryliodonium(III) salts as both the oxidant and aryl source has been developed. These salts can induce single‐electron‐transfer (SET) oxidation to yield electron‐rich arenes and subsequently transfer the polyalkoxyphenyl group into in situ generated aromatic radical cations to produce biaryl products. The reaction is promoted by a Lewis acid that activates the iodonium salts. It has been revealed that the reactivity of the salts under acidic conditions is quite different to their known behavior under basic conditions. The reactivity preference of a series of iodonium salts in the SET oxidation and their ligand transfer abilities have been systematically investigated and the results are summarized in this report.     

Formation of One‐Dimensional Helical Columns and Excimerlike Excited States by Racemic Quinoxaline‐Fused [7]Carbohelicenes in the Crystal

A series of quinoxaline‐fused [7]carbohelicenes (HeQu derivatives) was designed and synthesized to evaluate their structural and photophysical properties in the crystal state. The quinoxaline units were expected to enhance the light‐emitting properties and to control the packing structures in the crystal. The electrochemical and spectroscopic properties and excited‐state dynamics of these compounds were investigated in detail. The first oxidation potentials of HeQu derivatives are approximately the same as that of unsubstituted reference [7]carbohelicene (Heli), whereas their first reduction potentials are shifted to the positive by about 0.7 V. The steady‐state absorption, fluorescence, and circular dichroism spectra also became redshifted compared to those of Heli. The molecular orbitals and energy levels of the HOMO and LUMO states, calculated by DFT methods, support these trends. Moreover, the absolute fluorescence quantum yields of HeQu derivatives are about four times larger than that of Heli. The structural properties of the aggregated states were analyzed by single‐crystal analysis. Introduction of appropriate substituents (i.e., 4‐methoxyphenyl) in the HeQu unit enabled the construction of one‐dimensional helical columns of racemic HeQu derivatives in the crystal state. Helix formation is based on intracolumn π‐stacking between two neighboring [7]carbohelicenes and intercolumn CH ??? N interaction between a nitrogen atom of a quinoxaline unit and a hydrogen atom of a helicene unit. The time‐resolved fluorescence spectra of single crystals clearly showed an excimerlike delocalized excited state owing to the short distance between neighboring [7]carbohelicene units.     

Stereoselective Syntheses of all the Possible Stereoisomers of Coronafacic Acid

An efficient and stereoselective syntheses of all the possible stereoisomers of coronafacic acid (CFA) has been developed. The stereochemistries of C3a and C7a were controlled in a diastereoselective Diels-Alder type cycloaddition using a chiral auxiliary. CFA and 6-epi-CFA were synthesized by hydrogenation of a common intermediate. During the synthesis of 6-epi-CFA, we established that its cis-fused configuration is important for the introduction of C4-C5 double bond by dehydration. This report is the first practical synthesis of both 6-epi-CFA, and its enantiomer.     

Homogeneous Oligomeric Ligands Prepared via Radical Polymerization that Recognize and Neutralize a Target Peptide

Abiotic ligands that bind to specific biomolecules have attracted attention as substitutes for biomolecular ligands, such as antibodies and aptamers. Radical polymerization enables the production of robust polymeric ligands from inexpensive functional monomers. However, little has been reported about the production of monodispersed polymeric ligands. Herein, we present homogeneous ligands prepared via radical polymerization that recognize epitope sequences on a target peptide and neutralize the toxicity of the peptide. Taking advantage of controlled radical polymerization and separation, a library of multifunctional oligomers with discrete numbers of functional groups was prepared. Affinity screening revealed that the sequence specificity of the oligomer ligands strongly depended on the number of functional groups. The process reported here will become a general step for the development of abiotic ligands that recognize specific peptide sequences.     

Front Cover: Enhancement of Chiroptical Responses of trans‐Bis[(β‐iminomethyl)naphthoxy]platinum(II) Complexes with Distorted Square Planar Coordination Geometry (ChemistryOpen 4/2022)

The Front Cover shows the comparison of circularly polarized luminescence (CPL) properties of square planar platinum(II) complexes with different coordination geometries. Computational studies have revealed that the distortion of the coordination geometry is key to enhancement of the chiroptical responses of these compounds. More information can be found in the Research Article by Masahiro Ikeshita et al.     

RPA calculations with Gaussian expansion method

The Gaussian expansion method (GEM) is applied to calculations of the nuclear excitations in the random-phase approximation (RPA). We adopt the mass-independent basis-set that is successful in the mean-field calculations. The RPA results obtained by the GEM are compared with those obtained by several other available methods in Ca isotopes, by using a density-dependent contact interaction along with the Woods–Saxon single-particle states. It is confirmed that energies, transition strengths and widths of their distribution are described by the GEM with good precision, for the 1⁻, 2⁺ and 3⁻ collective states. The GEM is then applied to the self-consistent RPA calculations with the finite-range Gogny D1S interaction. The spurious center-of-mass motion is well separated from the physical states in the E1 response, and the energy-weighted sum rules for the isoscalar transitions are fulfilled reasonably well. Properties of low-energy transitions in ⁶⁰Ca are investigated in some detail.     

Luminescence and conduction charge in thin-film electroluminescent devices

The luminescence and conduction currents of a doubly-insulated thin-film electroluminescent device were studied under various excitation conditions. The conduction current waveform was calculated numerically from the luminescence waveform. It was composed of two components: a fast transient component j_fc, which rises and decays rapidly when a pulse is applied, and a dc-like component j_dc, which maintains a constant level during the duration of pulse. The ratio of these components varied considerably with applied voltage. Both the slow response of luminescence to voltage change and the change in j_fc when the excitation conditions were changed from repetitive pulses to a single pulse suggest an accumulation of charges inside the electroluminescence layer. This accumulation causes a space charge effect which explains the dominance of j_fc in the high-brightness region. The fact that luminescence intensity in this region is not related to the amplitude of individual pulses, but rather to the average amplitude of the pulse train also indicates that the space-charge-induced internal electric field is the main factor in accelerating the carriers which excite the luminescence centers. It was found that the two conduction current components showed similar characteristics in singly-insulated devices.