Phenolic constituents of licorice. VIII. Structures of glicophenone and glicoisoflavanone, and effects of licorice phenolics on methicillin-resistant Staphylococcus aureus

Two new phenolic compounds, glicophenone (1) and glicoisoflavanone (2), were isolated from commercial licorice, and their structures were elucidated on the basis of spectroscopic data. Antibacterial assays of licorice phenolics for Staphylococcus aureus, including four strains of methicillin-resistant S. aureus (MRSA), and also for Escherichia coli K12 and Pseudomonas aeruginosa PAO1, were then examined. Two compounds among them, 8-(gamma,gamma-dimethylallyl)-wighteone (21) and 3'-(gamma,gamma-dimethylallyl)-kievitone (28), showed remarkable antibacterial effects [minimum inhibitory concentrations (MICs), 8 microg/ml on the MRSA strains and methicillin-sensitive S. aureus. Licochalcone A (14), gancaonin G (20), isoangustone A (24), glyasperins C (30) and D (31), glabridin, (32), licoricidin (33), glycycoumarin (34) and licocoumarone (40) showed antibacterial effects on the MRSA strains with MIC values of 16 microg/ml. Effects on the beta-lactam resistance of the MRSA strains were also examined, and licoricidin (33) noticeably decreased the resistance of the MRSA strains against oxacillin, as shown by the reduction in the MICs of oxacillin (lower than 1/128-1/1000 in the presence of 8 microg/ml of 33, and 1/8-1/32 in the presence of 4 microg/ml of 33). Mechanistic study suggested that 33 does not inhibit the formation of penicillin-binding protein 2' (PBP2'), but affects the enzymatic function of PBP2'.     

Biomimetic formation of gramicidin S by dimerization-cyclization of pentapeptide precursor on solid support

The biomimetic formation of gramicidin S, cyclo(-d-Phe-Pro-Val-Orn-Leu-)₂, by the dimerization and cyclization of pentapeptide precursor without the protection of δ-amino group of the Orn residue was examined on a solid support. The cyclization of H-d-Phe-Pro-Val-Orn-Leu-oxime on a resin with an oxime group of 0.62 mmol/g in 1,4-dioxane directly gave gramicidin S in a 50% yield. The dimerization-cyclization mode on the solid support was similar to that of the biosynthesis of gramicidin S on an enzyme.     

Polymer‐Assisted Solution‐Phase Synthesis and Neurite‐Outgrowth‐Promoting Activity of 15‐Deoxy‐Δ12,14‐PGJ2 Derivatives

An efficient solution‐phase synthesis of rac‐15‐deoxy‐Δ^12,14‐PGJ₂ (15dPGJ₂) derivatives that contain variable α and ω chains based on a polymer‐assisted strategy and their neurite‐outgrowth‐promoting activity are described. The strategy for the synthesis of PGJ₂ derivatives involves the use of a vinyl iodide bearing cyclopentenone as a key intermediate, which undergoes Suzuki–Miyaura coupling and subsequent Lewis acid catalyzed aldol condensation for incorporation of the ω and α chains, respectively. For easy access to the PGJ₂ derivatives, a polymer‐supported catalyst and scavengers were adapted for use in these four diverse steps, in which workup and purification can be performed by simple filtration of the solid‐supported reagents. By using this methodology, we succeeded in the synthesis of 16 PGJ₂ derivatives with four alkyl boranes and four aldehydes. The neurite‐outgrowth‐promoting activity of the 16 synthetic compounds in PC12 cells revealed that the side‐chains play a major role in modulating their biological activity. The carboxylic acid on the α chain improved the biological activity, although it was not absolutely required. Furthermore, a PGJ₂ derivative with a phenyl moiety on the ω chain was found to exhibit an activity comparable to that of natural 15dPGJ₂.     

A Puckered Singlet Cyclopentane‐1,3‐diyl: Detection of the Third Isomer in Homolysis

In the photochemical denitrogenation of 1,4‐diaryl‐2,3‐diazabicyclo[2.2.1]heptane ( AZ6 ) bearing sterically hindered substituents, a curious new absorption band at about 450 nm was observed under low‐temperature matrix conditions, together with the previously well‐characterized planar singlet diradical pl‐¹ DR6 with λ_max=≈580 nm. The 450 nm species was electron paramagnetic resonance (EPR)‐silent. Instead of generating the planar diradical pl‐¹ DR6 and the precursor azoalkane AZ6 upon warming, the ring‐closed bicyclo[2.1.0]pentane derivative SB6 , that is, the AZ6 denitrogenation product was identified. Based on product analysis, low‐temperature spectroscopic observations, high‐level quantum‐mechanical computations, viscosity effect, and laser‐flash photolysis, the puckered singlet diradicaloid puc‐¹ DR6 was assigned to the new 450 nm absorption. The latter was detected experimentally at the same time as the planar singlet diradical pl‐¹ DR6 . Sterically demanding substituents as well as viscosity impediments were essential for the detection of the experimentally hitherto unknown puckered singlet cyclopentane‐1,3‐diyl diradicaloid puc‐¹ DR6 , that is, the third isomer in homolysis. The present findings should stimulate future work on the mechanistically fascinating stereoselectivity documented in the formation of bicyclo[2.1.0]pentanes during the 2,3‐diazabicyclo[2.2.1]heptane denitrogenation.     

Interaction between the end groups and the main chain of conjugated polymers by time-resolved EPR and fluorescence spectroscopy

ABSTRACT

Interaction between a zinc porphyrin (ZnPor) as the end-group and poly(9,9-di-n-octylfluorene-2,7-vinylene) (PFV) as the main chain in a porphyrin end-modified fluorescent conjugated polymer, ZnPFV, was studied by time-resolved electron paramagnetic resonance (EPR) and fluorescence spectroscopy. While fluorescence from the PFV part of ZnPFV showed a spectral profile almost identical to that of a PFV oligomer without end-modification, the emission spectrum of the ZnPor part exhibited a much broader profile compared to that of the reference zinc porphyrin monomer. Based on the analysis of lifetimes and quantum yields, it was found that radiative rate constant of the ZnPor part was enhanced by nearly three times. The observed unusual enhancement in the radiative rate constant was rationalised in terms of a partial π-conjugation between the end group and the main chain, as a result of co-planarisation in fluid solution. On the other hand, the time-resolved EPR spectrum of ZnPFV at 100?K basically showed a similar spectral pattern to that of the reference zinc porphyrin, but with significant differences in zero-field spitting parameters and initial population ratios. The π-system of the excited triplet state is deduced to deviate from D_4h symmetry in the end zinc porphyrin groups. The obtained results show that interaction of the porphyrin end group with the main chain of the polymer significantly influences the excited singlet state properties of the porphyrin, while its triplet state properties were affected to a lesser extent.     

Comprehensive Metabolite Profiling in Genetic Resources of Garlic (Allium sativum L.) Collected from Different Geographical Regions

Garlic (Allium sativum) is the second most important Allium crop that has been used as a vegetable and condiment from ancient times due to its characteristic flavor and taste. Although garlic is a sterile plant that reproduces vegetatively through cloves, garlic shows high biodiversity, as well as phenotypic plasticity and environmental adaptation capacity. To determine the possible mechanism underlying this phenomenon and to provide new genetic materials for the development of a novel garlic cultivar with useful agronomic traits, the metabolic profiles in the leaf tissue of 30 garlic accessions collected from different geographical regions, with a special focus on the Asian region, were investigated using LC/MS. In addition, the total saponin and fructan contents in the roots and cloves of the investigated garlic accessions were also evaluated. Total saponin and fructan contents did not separate the garlic accessions based on their geographical origin, implying that saponin and fructan contents were clone-specific and agroclimatic changes have affected the quantitative and qualitative levels of saponins in garlic over a long history of cultivation. Principal component analysis (PCA) and dendrogram clustering of the LC/MS-based metabolite profiling showed two major clusters. Specifically, many Japanese and Central Asia accessions were grouped in cluster I and showed high accumulations of flavonol glucosides, alliin, and methiin. On the other hand, garlic accessions grouped in cluster II exhibited a high accumulation of anthocyanin glucosides and amino acids. Although most of the accessions were not separated based on country of origin, the Central Asia accessions were clustered in one group, implying that these accessions exhibited distinct metabolic profiles. The present study provides useful information that can be used for germplasm selection and the development of new garlic varieties with beneficial biotic and abiotic stress-adaptive traits.     

Dumbbell-Shaped 2,2’-Bipyridines: Controlled Metal Monochelation and Application to Ni-Catalyzed Cross-Couplings

2,2’-Bipyridine ligands (dsbpys) with dumbbell-like shapes and differently substituted triarylmethyl groups at the C5 and C5’ positions showed high ligand performance in the Ni-catalyzed cross-electrophile coupling and the Ni/photoredox-synergistically catalyzed decarboxylative coupling reactions. The superior ligand effects of dsbpys compared to the conventional bpy ligands were attributed to the monochelating nature of dsbpys.     

Thiol-terminated hydroxy-functional polymer as a transtab toward polymer latex particles

Hydroxy-functional macrodisulfides have been synthesized by atom transfer radical polymerization of 2-hydroxyethyl methacrylate or 2-hydroxypropyl methacrylate in 2-propanol. Mean degrees of polymerization of the polymer chains beside the disulfide were fixed at 30, 60, and 90; since ATRP has reasonably good living character, the molecular weight distribution is relatively narrow. Furthermore, the macrodisulfides were reduced to synthesize corresponding thiol-terminated polymers with relatively narrow molecular weight distributions. ¹H nuclear magnetic resonance and gel permeation chromatography were used to characterize the macrodisulfides and thiol-terminated polymers in terms of their chemical structure, molecular weight, and polydispersity, respectively. Dispersion polymerizations of styrene using the thiol-terminated hydroxy-functional polymers as a transtab (chain transfer agent + colloidal stabilizer) in ethanol resulted in colloidally stable submicrometer-sized polystyrene latex particles. Scanning electron microscopy, Fourier transform infrared spectroscopy, and elemental microanalysis were used to characterize the particles in terms of their morphologies, particle sizes and their distributions, and chemical compositions.