In Situ Monitoring of Generation and Precipitation of Ferric Hydroxide Sol with a Piezoelectric Quartz Crystal Impedance Analyzer

The piezoelectric quartz crystal (PQC) impedance technique was applied to monitor in situ generation and precipitation of the ferric hydroxide sol in aqueous solutions at 90 degrees C. Equivalent circuit parameters and resonant frequencies as well as the half-peak width of the electroacoustic conductance spectrum deltaf(G1/2) for the PQC resonance were obtained and analyzed. Three stages, sol generation and simultaneous adsorption, adsorption equilibrium, and precipitation of ferric hydroxide sol could be identified in the process of adding the ferric nitrate solution into the hot water. A scheme of two consecutive reactions occurring at the electrode/solution interface was used to analyze the adsorption kinetics of ferric hydroxide sol onto the Au electrode. In addition, the electrolyte-induced precipitation of the colloid was monitored and discussed. Temperature effect on the PQC resonance behavior in liquid was also investigated. Since the PQC impedance technique provides multidimensional piezoelectric information in situ, it is highly recommended for studying the process of sol-gel generation and precipitation. Copyright 2001 Academic Press.     

库仑滴定法测定有机硅样品中的氮含量

本文利用库仑滴定法研究了高分子和低分子硅氮化合物及含氮有机硅样品中氮含量的测定,并研究和讨论了影响测定结果准确性的因素。     

Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.     

Preparation of Small Particle Sized ZnAl-Hydrotalcite-Like Compounds by Ultrasonic Crystallization

Ultrasonic technology has been intensively studied recently due to its special features. In this paper, an ultrasonic crystallization method was introduced for the preparation of ZnAl-Hydrotalcite-Like compounds (ZnAl-HTLcs). Samples with high crystallinity, small particle size and narrow particle size distribution were obtained and fully characterized using conventional techniques of XRD, FT-IR and TGDTA. The results prove that both ultrasonic frequency and ultrasonic power have effects on the sizes of the product particles. By varying the ultrasonic power from 250 W to 88 W, with the ultrasonic frequency fixed at 59 kHz, the median particle size of the samples increased from 0.37 μm to 0.82 μm. By altering the hydrothermal treatment time from 1 h to 5 h at 110℃, the median particle size of ZnAl-HTLcs synthesized via ultrasonic crystallization increased from 0.88 μm to 1.11 μm.     

Exciton interactions in CdS nanocrystal aggregates in reverse micelle

Here we report the formation and spectroscopic properties of cadmium sulfide (CdS) nanocrystal systems: individual nanocrystal and CdS aggregates. The optical absorption and luminescence spectra of the aggregated CdS nanocrystals and individual nanocrystal show exciton aggregate and individual exciton characteristics. Although it is not Bose-Einstein condensation, such aggregated quantum dots (QDs) seem to supply us opportunity to study the interactions and condensation of excitons in multi-QDs system, not in the separated QDs system.     

Effect of drug-loading methods on drug load, encapsulation efficiency and release properties of alginate/poly-L-arginine/chitosan ternary complex microcapsules

The drug-loaded alginate/poly-L-arginine/chitosan ternary complex microcapsules were prepared by mixing method, absorption method and the combined method of mixing and absorption, respectively. The effect of drug-loading methods on drug load, the encapsulation efficiency and the release properties of the complex microcapsules were investigated. The results showed that the absorption process is a dominating factor to greatly increase the drug load of Hb into microcapsules. Upon loading Hb into microcapsules by combined method of mixing and absorption, the drug load (19.9%) is up to the maximum value, and the encapsulation efficiency is 93.8%. Moreover, the drug release is a zero-order kinetics process for the ternary complex microcapsules made by mixing. For the complex microcapsules made by absorption, the drug release is a first-order kinetics. However, for the complex microcapsules made by combining the mixing and the absorption, the drug release obeys a first-order kinetics during the first eighteen hours, changing afterwards to a zero-order kinetics process. Effect of drug-loading methods on drug load and encapsulation efficiency of alginate/poly-L-arginine/chitosan ternary complex microcapsules.     

CURING KINETICS AND PROPERTIES OF ACRYLIC RESIN CURED WITH AZIRIDINE CROSSLINKER

A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinkingproperties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in theemulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transitiontemperature (T_g) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kineticsstudied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low(65.1 kJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and canbe used at room temperature.     

立体化学刚性的七配位环戊二烯基三(二苄基二硫代氨基甲酸)钛、锆、铪配合物的合成和性质

二烷基二硫代氨基甲酸基作为良好的双齿配体较易与过渡金属生成高配位的配合物,含有环戊二烯基的高配位钛、锆、铪配合物的研究相继出现^[1-5],这类七配位、18-电子构型的配合物是立体化学刚性,具有独特的光谱性质和结构行为。选择钛、锆和铪二茂二氯化物与三当量的二苄基二硫代氨基甲酸钠反应合成了五种未见报道的七配位配合物,讨论了产物的光谱性质和配位结构。     

A new method for the quantitation of aflatoxin M1 in urine by high performance liquid chromatography and its application to the etiologic study of hepatoma

A high performance liquid chromatographic (HPLC) method for the analysis of aflatoxin M1 (AFM1) in urine is described. Urine samples were treated with saturated lead acetate and AFM1 was extracted with chloroform. After washing with water to remove impurities the compound was derivatized with trifluoroacetic acid and the AFM1 derivative was analyzed quantitatively by HPLC. The sample pretreatment is simple and more selective. A good line correlation between AFM1 peak height and its concentration was obtained when AFM1 content was in the range of 50-400 pg. The ratio of recovery was 87.42%. Sensitivity is 0.01 ppb. The method is applicable to trace analysis. Results in urine of residents who live in the high/low liver cancer incidence area in Fushui county were the same as that of previous epidemiological investigation.