Intense Upconversion Luminescence of Yb<Superscript>3+</Superscript>-Er<Superscript>3+</Superscript> in Li<Subscript>2</Subscript>O Content Tungsten-tellurite Glasses

The Er³⁺ -Yb³⁺ codoped in Li₂O content tungsten -tellurite (TWL) transparent glasses are synthesized and measured the absorption, Raman and upconversion luminescence (UPL) spectra. At room temperature intense green emission peak at 560 nm ( ⁴S_3/2→⁴I_15/2) and red emission peak at 670 nm ( ⁴F_9/2→⁴I_15/2) of Er³⁺ observed even at minimum 86 mW pumping power of infrared 980 nm excitation. For structure of the TWL glass, Raman spectrum result revealed that an important role of WO₃ in the formation of glass network linkage with Li₂O. Under this influence estimated lifetime of the ⁴I_11/2 of Er³⁺ was 1.89 μs and due to lower phonon energy of the glass produce strong upconversion signal. The effect of Er₂O₃ concentration on emission intensity result indicated that green emission intensity initially increase in compare to red emission. Under the 980 nm pump power variation measured the relatively increases the red emission to the green emission intensity and analyze the possible upconversion mechanism and process.     

Combustion Behaviour of Nitrocellulose and its Complexes with Copper Oxide. Hot stage microscopic studies

Complexes of nitrocellulose (NC – low and high nitrogen content) with copper oxide (CuO) have been synthesized and studied for morphological behaviour on heating from room temperature to 500°C with the help of hot stage microscopy (HSM). During decomposition, NC:CuO complexes show contraction of fibrous boundaries followed by mass movement of matrix, with the evolution of brown yellow colour gas at higher temperatures as compared to NC alone. This revised version was published online in July 2006 with corrections to the Cover Date.     

Manifestation of strong magneto-electric dipolar coupling in ferromagnetic nanoparticles−FLC composite: evaluation of time-dependent memory effect

Rod-shaped 5 wt.% copper-doped ZnO (ZnO:Cu²⁺) ferromagnetic nanoparticles (NPs), prepared by hydrothermal method, were dispersed in ferroelectric liquid crystal (FLC) named Felix 17/100. The effect of ferromagnetic NPs on the physical properties of FLC material (Felix 17/100) has been investigated by dielectric, electro-optical and polarising optical microscopic methods. A noteworthy time-dependent memory has been observed in the NPs-dispersed FLC composite attributed to the coupling of magnetic field associated to NPs with the director orientation of FLC. Improvement in spontaneous polarisation and dielectric susceptibility of FLC material has been ensued with the addition of ferromagnetic NPs. Faster electro-optic response, at lower applied voltage, has also been observed in NPs-dispersed FLC composite. These changes are accredited to the magneto-electric dipolar coupling existing due to the interactions between magnetic-dipole and electric-dipole moments of magnetic NPs and FLC material, respectively. The formation of periodic domains capable to show memory effect has been observed in composite. The observed time-dependent memory was confirmed by dielectric and electro-optical methods. FLC material enriched with the properties of ferromagnetic NPs can be utilised in advanced multifunctional optical devices, time-dependent memory-based security devices and computational purposes.     

Synthesis of zerovalent nanophase metal particles stabilized with poly(ethylene glycol)

Concurrent sonolysis of iron pentacarbonyl and poly(ethylene glycol)-400 (PEG-400) in hexadecane solvent proceeds via zero-order kinetics and results in Fe nanoparticles encapsulated in PEG-400 (Fe-PEG). The transmission electron microscopy images show Fe-PEG consisting of <3 nm Fe particles that are evenly dispersed in the PEG matrix. M?ssbauer and X-ray absorption fine structure/X-ray absorption near-edge structure data reveal an ordered PEG assembly that helps protect the zerovalent Fe core. The Fe nanoparticles in Fe-PEG are superparamagnetic with a magnetization value of 45 emu/g-Fe at 10 KOe. The rheology of the synthesized material shows an unusual increase in viscosity with temperature that is likely due to lower critical saturation temperature phase segregation over 40 degrees C. The low-temperature mobility of the PEG-400 moiety in Fe-PEG would allow facile ligation of the Fe0 core with biologically and chemically active groups.     

Cell Disruption Optimization and Covalent Immobilization of β-D-Galactosidase from <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> YW-1 for Lactose Hydrolysis in Milk

β-D-galactosidase (EC 3.2.1.23) from Kluyveromyces marxianus YW-1, an isolate from whey, has been studied in terms of cell disruption to liberate the useful enzyme. The enzyme produced in a bioreactor on a wheat bran medium has been successfully immobilized with a view to developing a commercially usable technology for lactose hydrolysis in the food industry. Three chemical and three physical methods of cell disruption were tested and a method of grinding with river sand was found to give highest enzyme activity (720 U). The enzyme was covalently immobilized on gelatin. Immobilized enzyme had optimum pH and temperature of 7.0 and 40 °C, respectively and was found to give 49% hydrolysis of lactose in milk after 4 h of incubation. The immobilized enzyme was used for eight hydrolysis batches without appreciable loss in activity. The retention of high catalytic activity compared with the losses experienced with several previously reported immobilized versions of the enzyme is significant. The method of immobilization is simple, effective, and can be used for the immobilization of other enzymes.     

Synthesis of lariat organochalcogenoethers based on azacalix[3]arenes for the potentiometric detection of [UO2] ions

The syntheses of organochalcogen-supported azacalix[3]arenes are described in a one-pot manner in satisfactory yields. A remarkably selective potentiometric response was accomplished for uranyl ions over a variety of other metal ions, including alkali (Na⁺, K⁺), alkaline-earth (Mg²⁺, Ca²⁺, Ba²⁺), transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Fe³⁺, Zn²⁺, Cd²⁺ and Pb²⁺) using an ion-selective electrode based on compound 3 incorporated into a polymeric (PVC) membrane.     

Reproducible SERRS from structured gold surfaces

Metallic substrates with ordered spherical cavities have been shown to be very effective for surface-enhanced Raman scattering (SERS) and can be fabricated reproducibly using electrodeposition. The sensitivity of detection is increased by several orders of magnitude by using surface-enhanced resonance Raman scattering (SERRS). In this report we demonstrate SERRS for the first time on electrodeposited gold films templated with colloidal spheres and demonstrate the reproducibility of the response. We also obtain a direct comparison between SERRS and SERS by choosing two dyes, Cy5 and Cy3, which are similar in structure but differ in their excitation maxima, such that one is resonant and the other non-resonant with our laser excitation. As expected, the resonant enhancement is found to be of the order of 10(3) over and above that for SERS. The net SERRS enhancements are shown to be of the order of 10(9). We also find that the resonant enhancement profile of the different peaks for the chromophore follows the plasmonic resonance absorption spectrum obtained for the structured surface.     

SERS at structured palladium and platinum surfaces

Palladium and platinum are important catalytic metals, and it would be highly advantageous to be able to use surface enhanced Raman spectroscopy (SERS) to study reactive species and intermediates on their surfaces. In this paper we describe the use of templated electrodeposition through colloidal templates to produce thin (<1 microm) films of palladium and platinum containing close packed hexagonal arrays of uniform sphere segment voids. We show that, even though these films are not rough, when the appropriate film thickness and sphere diameter are employed these surfaces give stable, reproducible surface enhancements for Raman scattering from molecules adsorbed at the metal surface. We report SERS spectra for benzenethiol adsorbed on the structured palladium and platinum surfaces of different thicknesses and void diameters and show that, for 633 nm radiation, enhancements of 1800 and 550 can be obtained for palladium and platinum, respectively.     

The versatility of salicylaldehyde thiosemicarbazone in the determination of copper in blood using adsorptive stripping voltammetry

The adsorptive cathodic stripping voltammetry technique (AdCSV) is used to determine copper(II) using salicylaldehyde thiosemicarbazone (N, S- donor) as a complexing agent on hanging mercury drop electrode at pH 9.3. Variable factors affecting the response, i.e. the concentration of ligand, pH, adsorption potential and adsorption time are assessed and optimized. The adsorbed complex of copper(II) and salicylaldehyde thiosemicarbazone gives a well defined cathodic stripping peak current at −0.35 V, which has been used for the determination of copper in the concentration range of 7.85 × 10⁻⁹ to 8.00 × 10⁻⁶ M with accumulation time of 360 s at −0.1 V versus Ag/AgCl. This technique has been applied for the determination of copper in various digested samples of whole blood at trace levels.