Dioxo-molybdenum(VI) and mono-oxo-molybdenum(IV) complexes supported by new aliphatic dithiolene ligands: new models with weakened Mo=O bond characters for the arsenite oxidase active site

The cis-dioxo-molybdenum(VI) complexes, [MoO2(L(H))2]2- (1b), [MoO2(L(S))(2)]2- (2b), and [MoO2(L(O))2]2- (3b) (L(H) = cyclohexene-1,2-dithiolate, L(S) = 2,3-dihydro-2H-thiopyran-4,5-dithiolate, and L(O) = 2,3-dihydro-2H-pyran-4,5-dithiolate), with new aliphatic dithiolene ligands were prepared and investigated by infrared (IR) and UV-vis spectroscopic and electrochemical methods. The mono-oxo-molybdenum(IV) complexes, [MoO(L(H))2]2- (1a), [MoO(L(S))2]2- (2a), and [MoO(L(O))2]2- (3a), were further characterized by X-ray crystal structural determinations. The IR and resonance Raman spectroscopic studies suggested that these cis-dioxo molybdenum(VI) complexes (1b-3b) had weaker Mo=O bonds than the common Mo(VI)O2 complexes. Complexes 1b-3b also exhibited strong absorption bands in the visible regions assigned as charge-transfer bands from the dithiolene ligands to the cis-MoO2 cores. Because the oxygen atoms of the cis-Mo(VI)O2 cores are relatively nucleophilic, these complexes were unstable in protic solvents and protonation might occur to produce Mo(VI)O(OH), as observed with the oxidized state of arsenite oxidase.     

Dual-Phase structure of polymer electrolytes comprised of NBR/SBR latex films swollen with lithium salt solution

Dual-phase polymer electrolytes (DPE) that have high ionic conductivity (> 10^?3 S/cm) and good mechanical strength were prepared by mixing NBR and SBR latices and casting films. The latex films absorbed large quantities of lithium salt solution (e.g., 1M lithium perchlorate in γ-butyrolactone) to obtain DPE films but did not dissolve with swelling. The NBR phase is polar and was impregnated selectively with the polar lithium salt solution, whereas the SBR phase is nonpolar and formed a mechanically-supportive matrix. Transmission electron microscopic (TEM), electron energy loss spectral (EELS), and energy-dispersive x-ray (EDX) analyses showed microscopically the dual-phase structure. Evidence for swelling by lithium salt solution was found only in the NBR phase and not in the SBR phase by EDX microanalysis. Ionic conductivity as a function of NBR content or swelling degree showed clearly that a percolation threshold for ionic conductivity exists. © 1994 John Wiley & Sons, Inc.     

Xenophilic complexes bearing a Tp(R) Ligand, [Tp(R)M--M'Ln] [Tp(R) = Tp(iPr2), Tp(#) (Tp(Me2,4-Br)); M=Ni, Co, Fe, Mn; M'Ln = Co(CO)4, Co(CO)3(PPh3), RuCp(CO)2]: the two metal centers are held together not by covalent interaction but by electrostatic attraction

A series of dinuclear complexes, [Tp(R)M--M'L(n)] [Tp(iPr(2) )M--Co(CO)(4) (1; M=Ni, Co, Fe, Mn); Tp(#)M--Co(CO)(4) (1'; M=Ni, Co); Tp(#)Ni--RuCp(CO)(2) (3')] (Tp(iPr(2) )=hydrotris(3,5-diisopropylpyrazolyl)borato; Tp(#) (Tp(Me(2),4-Br))=hydrotris(3,5-dimethyl-4-bromopyrazolyl)borato), has been prepared by treatment of the cationic complexes [Tp(iPr(2) )M(NCMe)(3)]PF(6) or the halo complexes [Tp(#)M--X] with the appropriate metalates. Spectroscopic and crystallographic characterization of 1-3' reveals that the tetrahedral, high-spin Tp(R)M fragment and the coordinatively saturated carbonyl-metal fragment (M'L(n)) are connected only by a metal-metal interaction and, thus, the dinuclear complexes belong to a unique class of xenophilic complexes. The metal-metal interaction in the xenophilic complexes is polarized, as revealed by their nu(CO) vibrations and structural features, which fall between those of reference complexes: covalently bonded species [R--M'L(n)] and ionic species [M'L(n)](-). Unrestricted DFT calculations for the model complexes [Tp(H(2) )Ni--Co(CO)(4)], [Tp(H(2) )Ni--Co(CO)(3)(PH(3))], and [Tp(H(2) )Ni--RuCp(CO)(2)] prove that the two metal centers are held together not by covalent interactions, but by electrostatic attractions. In other words, the obtained xenophilic complexes can be regarded as carbonylmetalates, in which the cationic counterpart interacts with the metal center rather than the oxygen atom of the carbonyl ligand. The xenophilic complexes show divergent reactivity dependent on the properties of donor molecules. Hard (N and O donors) and soft donors (P and C donors) attack the Tp(R)M part and the ML(n) moiety, respectively. The selectivity has been interpreted in terms of the hard-soft theory, and the reactions of the high-spin species 1-3' with singlet donor molecules should involve a spin-crossover process.     

Theoretical calculation of structures and proton transfer in hydrated ammonia-hydrogen chloride clusters

Ab initio molecular orbital calculations have been performed to investigate the structures and quantum effects of the proton motion in NH(3):HCl:(H(2)O)(n) (n = 0-3) clusters using a MP2/aug-cc-pVDZ level of theory. Three new stable structures and one transition-state structure are investigated for these clusters. The detailed analyses of the intermolecular interactions suggest that three-body interactions play an important role to determine the relative stability in each size of cluster. The quantum effects of the proton motion result in frequency shifts for proton-stretching modes. Our one-dimensional and two-dimensional models fairly closely reproduce the experimental proton-stretching vibrational frequency of the NH(3):HCl cluster. The most stable isomer for n = 1 has a proton-transfer structure, which is weakened by the quantum effects of the proton motion.     

Polymerization of cyclic imino ethers: From its discovery to the present state of the art

Topics concerning the cationic ring‐opening polymerization of cyclic imino ethers and functional material production based on the resulting polymers are reviewed. Cyclic imino ethers are readily subjected to isomerization polymerization via cationic initiators. Mechanistic studies have provided a new concept, electrophilic polymerization. Double isomerization polymerization and no‐catalyst alternating copolymerization are interesting examples that show characteristics of the ring opening of cyclic imino ethers. The living polymerization of these monomers affords precisely controlled polymeric materials. Through the use of the unique properties of the product polymers, various functional polymeric materials, such as polymeric nonionic surfactants, compatibilizers, hydrogels, stabilizers for dispersion polymerization, biocatalyst modifiers, and supramolecular assemblies, have been developed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 192–209, 2002     

Trapping effect of eugenol on hydroxyl radicals induced by L-DOPA in vitro

Many researchers have stated that eugenol might inhibit lipid peroxidation at the stage of initiation, propagation, or both, and many attempts have been made to elucidate the mechanism of its antioxidant activity. Nevertheless, details of its mechanism are still obscure. This study was carried out to investigate the trapping effect of eugenol on hydroxyl radical generated from L-3,4-dihydroxyphenylalanine (DOPA) in MiliQ water and the generation mechanism of the hydroxyl radical by this system which uses no metallic factor. This was studied by adding L-DOPA and 5,5-dimethyl-1-pyrroline N-oxide (DMPO) to phosphate buffered saline (PBS) or MiliQ water, and the generation of hydroxyl radical was detected on an ESR spectrum. By this method, the effect of antioxidants was detected as a modification of ESR spectra. We found that the eugenol trapped hydroxyl radicals directly, because it had no iron chelating action, did not trap L-DOPA semiquinone radical and inhibited hydroxyl radicals with or without iron ion.     

Heterotopic assemblage of two different disk-shaped ligands through trinuclear silver(I) complexation: ligand exchange-driven molecular motion

The sandwich-shaped heterotopic trinuclear Ag+ complex Ag(3)1.2 was exclusively formed from two different tris(thiazolyl) and hexa(thiazolyl) disk-shaped ligands, 1 and 2, with the aid of three Ag+ ions. The variable-temperature 1H NMR study on its complexation behavior revealed that metal-ligand exchanges between the two neighboring thiazolyl nitrogen donors of 2 take place at the three Ag+ centers in concert. DeltaH++ and DeltaS++ for the exchange process were calculated to be 50.5 kJ mol(-1) and -26.7 J mol(-1) K(-1), respectively, and its energy barrier at 298 K was estimated to be 58.5 kJ mol(-1). Each concerted metal-ligand exchange leads to an intramolecular 60 degrees-rotational motion ((P) <==>(M) conversion) between the two disk-shaped ligands.     

Mössbauer study of new vanadate glass with large charge-discharge capacity

Charge-discharge capacity and cyclicity of lithium ion battery (LIB) was evaluated in which 15Li₂O·10Fe₂O₃·xSnO₂·5P₂O₅·(70–x)V₂O₅ glass (x?=?0 and 20 in mol%, abbreviated as xLFSPV) was used as a cathode. A local structure of xLFSPV glass before and after charging was investigated by ⁵⁷Fe- and ¹¹⁹Sn-Mössbauer spectroscopies. ⁵⁷Fe-Mössbauer spectrum of xLFSPV glass with ‘x’ of 20 was composed of a doublet with isomer shift (δ) of 0.35_±0.02 mm s^???1 and quadrupole splitting (Δ) of 0.88_±0.03 mm s^???1 due to distorted Fe^IIIO₄ tetrahedra. ¹¹⁹Sn-Mössbauer spectrum of this glass consisted of a doublet with δ of 0.08_±0.01 and Δ of 0.52_±0.01 mms^???1 due to distorted Sn^VIO₆ octahedra. After discharging the battery from 4.5 to 1.0 V, larger δ of 0.40_±0.03 mm s^???1 and Δ of 0.94_±0.04 mm s^???1 were obtained, indicating that both iconicity of Fe-O bonds and local distortion of Fe^IIIO₄ tetrahedra were increased. On the contrary, identical δ of 0.09_±0.01 mm s^???1 and Δ of 0.50_±0.01 mm s^???1 were observed in the ¹¹⁹Sn-Mössbauer spectrum of 20LFSPV glass after the discharge, indicating that chemical environment of Sn^IVO₆ octahedra was not affected after the discharge. Charge-discharge curve of LIB containing 20LFSPV glass as a cathode active material recorded under the current density of 8.3 mA g^???1 (0.011 mA cm^???2) between 1.0 and 4.5 V showed a large initial charge capacity of 431.1 mAh g^???1 and discharge capacity of 382.3 mAh g^???1, respectively. These results indicate that 20LFSPV glass could be a new cathode active material for LIB.     

Single Nucleotide Polymorphism Typing with a Surface Plasmon Resonance-Based Sensor Using Hybridization Enhancement Blockers

We constructed a simple method for discrimination of single nucleotide polymorphism (SNP) with a surface plasmon resonance (SPR)-based sensor by determining the binding volume (BV) between a target SNP allele and a probe complementary to the target. In the method, a novel additive termed “blocker,” which is a short single-stranded DNA complementary to the target, was used. The blocker enhanced the BV of the target only to the full-match probe 10-fold or more, so the SNP alleles could be discriminated readily. The effect of the blocker concentration was also examined. The BV to only a full-match probe increased with increasing the blocker concentration and reached a plateau at the concentration of 300–500 nM. To assess the effectiveness of this method, the SNP associated with progressive rod-cone degeneration in dog was determined. The results of genotyping with the method were in good agreement with those obtained by direct sequencing.     

Mechanically strengthened new Hagi porcelain developed by controlling the chemical environment of iron

In order to enhance the mechanical strength of Hagi Porcelain (Hagiyaki), one of the oldest and famous potteries in Japan, new preparation condition was examined. Tempered Hagi porcelain, denominated as ‘Hagi Porcelain B’, was prepared with the Porcelain clay originating from Daido district, Yamaguchi Prefecture, Japan. Structural change of ‘Hagi Porcelain B’ was investigated by means of ⁵⁷Fe-Mössbauer spectroscopy, X-ray diffractometry (XRD) and three-point bending test. Mechanical strength of the ‘original Hagi Porcelain B’ was estimated to be 43.1 MPa by means of the three-point bending test, while much larger value of 104.5 MPa could be achieved when tempered by a chemical modification. Mössbauer spectrum of the ‘original Hagi porcelain B’ was composed of a paramagnetic doublet and a magnetic sextet due to Fe(III) of γ-Fe₂O₃(maghemite), while only one paramagnetic doublet due to to octahedral Fe(II)O₆ was observed for the ‘tempered Hagi Porcelain B’ with isomer shift and quadrupole splitting values of 1.13 and 2.15 mm s^?1, respectively. It is considered that the absence of magnetic phase causes an increase of the mechanical strength because the maghemite phase has a defect spinel structure. These results indicate that mechanical strength of the ‘Hagi porcelain B’ could be enhanced by controlling the sintering condition.