Chemical conversion of various celluloses to glucose and its derivatives in supercritical water

The supercritical water biomass conversion system was designed and developed in our laboratory. The reaction vessel with cellulose sample was treated with this system at supercritical state of water for a designated period (3–105s) under the conditions of a tin bath temperature of 500°C and pressure of 35MPa. The recovered products of hydrolysates were then analyzed by high performance liquid chromatography. The obtained results indicated that a high amount of glucose and levoglucosan can be achieved from both celluloses I and II for 5–10s supercritical treatment, while that from starch for 3–5s treatment. Although this difference could be due to a difference in the molecular structure between cellulose and starch, a difference between celluloses I and II was not significant. Instead, an accessibility of the water towards cellulose molecules seemed to be significant for their chemical conversion. With the longer treatment, amounts of these compounds observed were decreased due to decomposition. Therefore, it may be concluded that, compared with acid hydrolysis or enzymatic saccharification, cellulose may be hydrolyzed to glucose and its derivatives more or less to the same degree as in corn starch under supercritical state. This finding suggests that the supercritical treatment can overcome the difficulties in hydrolyzing cellulose to glucose, found in the acid hydrolysis or enzymatic saccharification techniques.     

A New Family of Indoaniline-Derived Calix[4]arenes: Synthesis and Optical Recognition Properties as a Chromogenic Receptor(1)

A new family of indoaniline-derived calix[4]arenes has been synthesized for the purpose of developing a new chromogenic receptor. A condensing reaction of calix[4]arene (1) with 4-(diethylamino)-2-methylaniline hydrochloride (2) in the presence of an oxidizing agent under alkaline conditions affords mono- (3), 1,2-bis- (4), 1,3-bis- (5), and tetrakisindoaniline-derived (6) calix[4]arenes after careful column chromatography. Compound 3 is crystallized from a CHCl(3)-MeOH solution, and the crystal structure was determined by X-ray analysis. The crystal is monoclinic, space group P2(1)/n, Z = 4, a = 19.507(6) ?, b = 18.591(6) ?, c = 8.524(2) ?, beta = 94.69(2) degrees. The final R value for 2406 reflections of F(o) > 3sigma(F(o)) is 0.085. A unique intramolecular hydrogen-bonding network involving the carbonyl oxygen of indoaniline for 3 implied that the quinone carbonyl group as an acceptor of the chromophore can easily be subjected to an electrostatic interaction in the lower rim. Indeed, 1,3-bis(indoaniline)-derived 2,4-bis((ethoxycarbonyl)methoxy)calix[4]arene 7, prepared by the reaction of 5 with ethyl bromoacetate in the presence of NaH, is capable of undergoing an efficient ion-dipole interaction between the binding cation and the two quinone carbonyl groups of the chromophores, so that a selective Ca(2+)-induced pronounced color change (wavelength change > 100 nm) occurs with an association constant on the order of 10(6) in 99% EtOH, making 7 of potential use as an optical sensor for Ca(2+) detection. The IR and NMR studies have indicated that Ca(2+) is encapsulated in the cavity made by the distally located OCH(2)CO(2) groups on the lower rim of the cone-shaped calix[4]arene segment. Interestingly, however, the shape of the cavity in which Ca(2+) has been encapsulated does not have a C(2) axis of symmetry, as inferred from the (1)H-(1)H COSY experiment. On the other hand, 1,2-bis(indoaniline)-derived analogue 8 shows no response with metal ions, which can be interpreted to mean the absence of a cavity for encapsulation on the lower rim.     

Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

A new oligosaccharide synthesis using special hydroxy protecting group

A new hydroxy protecting group for convenient preparation of oligosaccharide was developed using uni-chemo protection (UCP) concept. The UCP group was comprised of polymerized amino acid derivatives and protecting each hydroxyl groups by ester linkage. Depending on the polymerization degree, the hydroxyl groups were characterized and controlled. Using this protecting group, two kinds of sialyl-T analogues were successfully synthesized from same sugar parts merely by repeating Edman degradation and coupling.     

Hydrogen Effect on Coke Removal and Catalytic Performance in Pre-Carburization and Methane Dehydro-Aromatization Reaction on Mo/HZSM-5

1. Introduction As an effective utilization of methane, the methane dehydro-aromatization was focused in the last decade [1-28]. Over the Mo/HZSM-5 bi- functional catalyst at high reaction temperature, methane can be converted into light aromatics (ben- zene and naphthalene) and hydrogen. Mo active species can activate the C—H bond of methane; and HZSM-5 supplies the acid sites for the oligomeriza- tion and cyclization of hydrocarbons to form aromat- ics, and suppresses the deeper condens…     

Polymerization of methyl methacrylate initiated by tri-n-butylborane–organic halide systems

The polymerization of methyl methacrylate (MMA) initiated by tri-n-butylborane (TBB) was studied in the presence of various organic halides (R′X). It was found that R′X accelerated the polymerization of MMA. Aliphatic halides were more effective than aromatic halides. Cocatalytic effects of butyl halides decreased in the order: n -BuI > n -BuBr > n -BuCl; n -BuBr ? sec-BuBr > i-BuBr > tert-BuBr. In the polymerization of MMA by TBB- n -BuI, the initial rate of polymerization was found to be proportional to the concentration of MMA and to the square root of the concentration of TBB-n-BuI. The apparent activation energy was 5.3 kcal/mole. From this and other results, it was assumed that the polymerization of MMA by this initiator system proceeds by a radical mechanism via a weak complex between TBB and R′X; alkyl radicals are formed by the interaction of R′X with TBB. The TBB–R′X system can initiate the polymerization of MMA and AN, but is ineffective in the polymerization of styrene.     

SYNTHESIS OF ORGANOGERMANE OLIGOMERS VIA LIGAND SUBSTITUTION POLYMERIZATION FROM 1, 4-DIOXANE COMPLEX OF GERMANIUM DICHLORIDE

Some organogermanium oligomers with different side groups were synthesized via li-gand substitution polymerization from 1, 4-dioxane complex of germanium dichloride withdifferent organolithitum compounds. The oligomers were isolated through either precipi-tation from methanol or extraction using toluene with a yield of no less than 50%. Theweiglit average molecular weight (M_w) of the oligomers is ranging from 1.4×10~3 to 5.9×10~3depending on the type and alkyl length of the organolithium compounds used.