Immunochemical determination of dioxins in sediment and serum samples

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are considered highly toxic contaminants and the environmental and biological monitoring of these compounds is of great concern. Immunoassays may be used as screening methods to satisfy the growing demand for rapid and low cost analysis. In this work, we describe the application of an immunoassay that uses 2,3,7-trichloro-8-methyldibenzo-p-dioxin (TMDD) as a surrogate standard for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to sediment and human serum samples. Sample extraction and preparation methods were developed with the aim to establish the simplest, cost-effective and efficient removal of the matrix interferences in the enzyme-linked immunosorbent assay (ELISA). The overall method for sediments is based on a hexane extraction; clean up by a multilayered silica gel column and an activated carbon column; an organic solvent exchange with DMSO–Triton X-100 and ELISA measurement. The gas chromatography–high resolution mass spectrometry (GC–HRMS) validation studies (n = 13) revealed that the method is suitable for the toxic equivalents (TEQ) screening of dioxin in sediments with a method detection limit of about 100 pg g⁻¹ dry sediment with a precision of 13–33% R.S.D. The analysis of a large number of samples originating from different sources would be required to establish more precisely the screening level, as well as the number of false positives and negatives of dioxin TEQ by the immunoassay for sediments. The immunoassay method for sediment analysis offers improvement in speed, sample throughput, and cost in comparison to GC–HRMS. Dioxins were determined in serum samples after a simple liquid–liquid extraction and solvent exchange into DMSO–Triton X-100 without further dilution. The current method (approximate method LOQ of 200 pg ml⁻¹ serum) is not sufficiently sensitive for the determination of dioxins in serum to measure acceptable exposure limit.     

Synthesis and Characterization of Ge(II), Sn(II), and Pb(II) Monoamides with -NH2 Ligands

The synthesis and characterization of the first divalent germanium, tin, and lead monoamide derivatives of the parent amide group -NH(2) are presented. They have the general formula (ArMNH(2))(2) (M = Ge, Ar = Ar'(C(6)H(3)-2,6-Pr(i)(2)) or Ar* (C(6)H(3)-2,6(C(6)H(2)-2,4,6-Pr(i)(3))); M = Sn, Ar = Ar*; M = Pb, Ar = Ar*). For germanium and tin, they were obtained by reacting the corresponding terphenyl halides of the group 14 elements with liquid ammonia in diethyl ether. The lead amide derivative (Ar*PbNH(2))(2) was synthesized by reaction of LiNH(2) with Ar*PbBr in diethyl ether. The compounds were characterized by IR and multinuclear NMR spectroscopies and by X-ray crystallography in the case of the (Ar'GeNH(2))(2) or (Ar*SnNH(2))(2) derivatives. They possess dimeric structures with two -NH(2) groups bridging the germanium and tin centers. For lead, the reaction with ammonia led to isolation of a stable ammine complex of formula Ar*PbBr(NH(3)) which was characterized by IR and NMR spectroscopies and by X-ray crystallography. It is the first structural characterization of a divalent lead ammine complex.     

Development of a sensitive enzyme immunoassay for the detection of phenyl-β-d-thioglucuronide in human urine

Immunoassays for the measurement of glucuronides in human urine can be a helpful tool for the assessment of human exposure to toxic chemicals. Therefore an enzyme immunoassay (EIA) for the specific detection of phenyl-β-d-thioglucuronide was developed. The immunoconjugate was formed by coupling p-aminophenyl-β-d-thioglucuronide to the carrier protein thyroglobulin leaving an exposed glucuronic acid. The hapten-protein conjugate was adsorbed to gold colloids in order to enhance the immunogenic effect. Rabbits were injected with the immunogold conjugates to raise polyclonal antibodies. The resulting competitive assay showed an inhibition by phenyl-β-d-thioglucuronide at sample concentrations of 23.0 ± 1.3 ng/mL (50% B/B₀) and a high cross-reactivity to p-aminophenyl-β-D-thioglucuronide (120%). Little cross-reactivities (< 2%) were observed for potential urinary cross reactants. In addition human urine samples were incubated with β-glucuronidase in order to investigate the EIA for specific matrix effects. An integration of high-performance liquid chromatography (HPLC) and EIA was developed in an attempt to decrease the matrix effects and increase the sensitivity of the overall method. The hyphenated technique HPLC-EIA may be used to monitor human exposure to toxic thiophenol which is excreted by mammals as urinary phenyl thioglucuronide.     

The beryllium dimer potential

The convergence of ab initio calculations of the beryllium dimer potential is examined with several basis sets orders of perturbation theory. When the atomic pair natural orbital basis set calculations are extrapolated to the complete basis set and full CI limits, the calculated parameters: R_e=2.447 Å, D_e=827 cm⁻¹, ν₀₁=212.7 cm⁻¹, ν₁₂=167.2 cm⁻¹, ν₂₃=121.5 cm⁻¹ and ν₃₄=77.7 cm⁻¹ are in good agreement with the experimental parameters: R_e=2.45 Å, D_e=839±10 cm⁻¹, ν₀₁=223.2 cm⁻¹, ν₁₂=169.7 cm⁻¹, ν₂₃=122.5 cm⁻¹, and ν₃₄=79 cm⁻¹.     

Polymeric thiols as enzyme activators of serum creatine phosphokinase

Several hydrophilic polymeric thiols were prepared from aminoactivated polymeric supports by reaction with N-acetylhomocysteinethiolactone. Supports include agaroses, cellulose, Glycophase™ controlled-pore glass, and Matrex™ acrylic beads. Thiol content in these polymers was 3–72 μmol SH/g dry polymer. Several were effective solid-phase activators of the sulfhydryl-dependent enzyme creatine phosphokinase at concentrations comparable to that of monomeric thiol required for enzyme activation. The kinetic activation curves for the polymeric and the monomeric (thioglucose) activators were similar, suggesting unhindered interaction of the enzyme with the polymeric activator.     

GC–MS analysis of phenolic compounds in fuels after conversion to trifluoroacetate esters

The GC–MS characteristics of trifluoroacetate esters of phenolic compounds are discussed. Linear temperature programmed retention indices and total ion current MS response factors of over 120 phenolic esters are reported. The main GC advantages from analysis of trifluoroacetate esters as compared to plain phenols are enhanced volatility and improved resolution. For example, the elution temperature of a given phenol is typically 50 °C greater than that of the corresponding trifluoroacetate ester. Also, while retention of compounds with two trifluoroacetate groups is only moderately greater than mono esters, underivatized dihydroxy compounds are very difficult to elute from any GC column. Complete resolution of isomeric C₀-, C₁- and C₂-alkylphenol esters is readily achieved on conventional fused silica GC columns; resolution of the corresponding underivatized compounds requires specialized GC columns with low temperature limits. In general, mass spectra of trifluoroacetate esters are more characteristic of a given structure than those of the corresponding phenols and may be more rigorously interpreted towards structural elucidation. A table in the report summarizes some of the more important spectral features used in compound identification. Example applications in analysis of coal-, shale- and petroleum-derived materials are presented. Selected ion monitoring is used to determine individual phenolic components in whole distillates; reconstructed ion chromatograms are used to illustrate distributions of selected species as a function of fuel storage and thermal stress.     

Electron Spectroscopy - A Potentially Useful Tool for Environmental Studies

The technique of electron spectroscopy (ESCA) is reviewed. Those aspects are discussed which seem to be of greatest potential interest to workers in environmental studies. Basic theory of the photoelectron ejection process is considered along with the Auger effect. Factors affecting the calculation of electron binding energies are discussed. Instrumentation utilizing both magnetic and electrostatic monochromators is discussed in some detail.

The nature of ESCA data is considered, along with an extensive tabulation of chemical shifts observed for 15 elements. Application of ESCA to surface studies is reviewed, using examples like effect of layers of material on electron intensities, investigations of zeolites and some elementary catalysis studies. A review of the quantitative aspects of ESCA considers the determination of arsenic in soils and the measurement of mixed oxide ratios.     

Advances towards Cell-Specific Gene Transfection: A Small-Molecule Approach Allows Order-of-Magnitude Selectivity

A transfection vector that can home in on tumors is reported. Whereas previous vectors that allow moderately cell selective gene transfection used larger systems, this small-molecule approach paved the way for precise structure-activity relationship optimization. For this, biotin, which mediates cell selectivity, was combined with the potent DNA-binding motif tetralysine-guanidinocarbonypyrrol via a hydrophilic linker, thus enabling SAR-based optimization. The new vector mediated biotin receptor (BR)-selective transfection of cell lines with different BR expression levels. Computer-based analyses of microscopy images revealed a preference of one order of magnitude for the BR-positive cell lines over the BR-negative controls.     

Use of chromatographic pre-concentration for routine uranium bioassay analysis by ICP-MS

Routine monitoring of urine is an effective way to detect occupational intake of radioactive material. Historically, determinations of uranium isotopic ratios have been performed by radiochemical separation followed by alpha spectrometry. With recent advancements in technology, inductively coupled plasma-mass spectrometry (ICP-MS) has become widely available for the determination of trace metals as well as radioactive nuclides with long half-lives, such as ²³⁸U in urine. Furthermore, ICP-MS measurements of ²³⁸U do not require radiochemical separation since the number of atoms in the sample is determined instead of the number of alpha particles emitted. However, this method does not provide good sensitivity for the determination of ²³⁵U due to its shorter half-life. An improved procedure using pre-concentration of uranium and determination by ICP-MS decreases the detection limit by a factor of ten or greater with only slight increase in total analysis time. The method also has the capability of accurately determining the isotopic ratio of the sample, which is very important in cases where enriched or depleted uranium is involved.     

Structural and electronic properties of amorphous bismuth calcium borate from first-principle calculations

Structural Chemistry - We investigatethe electronic and structural properties of two new amorphous materials, Bi6Ca2O28B12 and Bi6Ca2 O28B11:Tm, using density functional theory with a short-range...