新型仿生蜂窝结构的设计与耐撞性能分析

受自然界毛竹微观结构的启发,在传统圆管与六边形管的基础上引入内管及双菱形肋骨,通过拓扑衍生方法设计了两种新型仿生蜂窝结构。在此基础上利用有限元软件ABAQUS对新型仿生蜂窝的耐撞性进行数值模拟,研究了蜂窝单胞构型、蜂窝壁厚、双菱形肋骨夹角对仿生蜂窝耐撞性能的影响。此外,基于超折叠单元理论,建立了仿生蜂窝结构的理论分析模型。结果表明:仿生蜂窝的面外压缩耐撞性能优于传统圆形蜂窝和传统六边形蜂窝。新型仿生六边形蜂窝的比吸能相比传统六边形蜂窝提高51.18%,压缩力效率提高53.14%。仿生蜂窝结构的平均压缩力理论预测结果与数值模拟结果吻合,两者间的误差均在10%以内。单胞构型为六边形的仿生蜂窝的耐撞性能优于圆形仿生蜂窝。适当增加仿生蜂窝壁厚或增大双菱形肋骨夹角,均有利于提高结构的耐撞性能。     

Thin-Film Morphologies of Random Copolymers as Functions of Thermal History

Series polymers of butyl methacrylate with various contents of 3-(trimethoxysilyl)propyl methacrylate (MSMA) that introduces crosslinking networks among the macromolecules upon hydrolysis and self-condensation have been synthesized by free radical polymerization, and the influence of crosslinking density on the film properties has been examined. The polymer solutions were spin-cast over a layer of polystyrene brush to yield homogeneous polymer films. When the films of about 30 nm thick were exposed to moisture and then heated at 60 degrees C for hydrolysis and self-condensation of MSMA groups, the initially flat surfaces became slightly coarser but without apparent dewetting. Further annealing at 140 degrees C resulted in dewetting of the thin films, whose morphologies in thermodynamic equilibrium were related to the chemical compositions of the polymers. The polymers having higher contents of MSMA exhibited significantly reduced dewetting at the high temperature, due to the higher density of crosslinking networks that restricted the molecular mobility. In contrast to the thin films of about 30 nm thick, thicker films (about 100 nm) showed only a slight dewetting, even non-dewetting at the elevated temperature. Copyright 2001 Academic Press.     

无规聚丙烯裂化反应的动力学——端部剥离式呈零级反应的探讨

本文从裂化无规聚丙烯制取丙烯低聚物的实验入手,通过对不同裂化反应程度的试料与产物的碘值、粘度、分子量分布等的组成特性变化规律的考查,提出单分子的端部剥离式反应模型,推导了零级反应速度的计算公式:dm_p/dt=k₀m₀;同时也给出了最后进行单分子的一级反应速度的计算公式:dm_p/dt=k₁m(k₁=2k₀)。     

Two-dimensional heterostructures built from ultrathin CeO2 nanosheet surface-coordinated and confined metal–organic frameworks with enhanced stability and catalytic performance

Two-dimensional (2D) metal–organic framework (MOF) based heterostructures will be greatly advantageous to enhance catalytic performance because they increase the contact surface and charge transfer. Herein, a novel 2D heterostructure named CeO₂@NiFe-MOFs, in which monolayer NiFe-MOFs is coordinated with ceria (CeO₂) to improve catalytic and stability performance, is successfully constructed by the strategy of in situ growth on the surface of ultrathin CeO₂ nanosheets being functionalized with monolayer carboxylic acid groups. The 2D heterostructure possesses a sandwich structure, where monolayer NiFe-MOFs are coordinated to both the top and bottom surface of CeO₂ nanosheets via joining carboxylic acid groups. In particular, CeO₂ with robust coordination plays a significant role in the anchoring of carboxylic acid groups and binding strength of heterostructures. The 2D CeO₂@NiFe-MOF heterostructure with a joint effect of metal–ligand coordination not only presents good structural stability but also significantly enhances the oxygen evolution reaction (OER) efficiencies in comparison to bare NiFe-MOFs, achieving a current density of 20 mA cm⁻² at a low overpotential of 248 mV as well as durability for at least 40 h. Meanwhile, the electronics, optics, band gap energy and local strains of CeO₂ decorated with 2D NiFe-MOFs are different to the properties of bare CeO₂. Our study on the construction of an ultrathin CeO₂ surface-coordinated and confined MOF layer may pave a new way for novel 2D MOF composites/heterostructures or multi-functional 2D CeO₂ materials to be used in energy conversion or other fields.

A synthetic strategy to prepare 2D heterostructures from ultrathin CeO₂ surface-coordinated metal–organic framework was proposed, proving multiple effects of metal-coordinated interactions in 2D heterostructures.     

NiB和NiP超细非晶合金的退火晶化行为及催化性能

 采用X射线吸收精细结构（XAFS）,X射线衍射（XRD）和差热分析（DTA）等方法研究了以化学还原法制备的NiB和NiP超细非晶态合金催化剂在退火过程中的结构变化．XRD结果表明,在300℃下退火时,NiB超细非晶态合金晶化生成纳米晶Ni3B亚稳物相,NiP超细非晶态合金则主要晶化生成金属Ni和部分晶态Ni3P的混合物相;在500℃退火且近于完全晶化的条件下,大部分超细非晶态合金都晶化为金属Ni．XAFS结果定量地说明,对于NiB和NiP初始样品,第一近邻Ni－Ni配位的平均键长Rj分别为0.274和0.271nm,其结构无序度σS很大,分别为0.033和0.028nm,其热无序度σT分别为0.0069和0.0060nm．300℃退火后,晶化生成的Ni3B的Ni－Ni配位的σS降低到初始样品的33％,仅为0.011nm．500℃退火后,NiB样品的结构参数与金属Ni基本一致,但NiP样品的Ni－Ni配位的σS还远大于σT,仍为0.0125nm,表明NiB和NiP超细非晶态合金的退火晶化行为有很大的差别．纳米晶Ni3B催化苯加氢反应的转化率比超细Ni－B非晶态合金或多晶金属Ni更高,表明纳米晶Ni3B中的Ni与B原子组成了苯加氢催化反应的活性中心．     

火焰原子吸收光谱法测定液氨中的铁

应用火焰原子吸收光谱法对液氨中的铁含量进行测定。分析了测定条件。方法简便、快速。测定铁的线性范围为0-8．00mg／L,相关系数为0．9999。应用于样品测定,测定结果的相对标准偏差小于2％,加标回收率为97．4％-106．1％。     

高架路匝道附近的交叉口交通流分析

考虑高架路匝道附近的交叉口交通流问题．所采用的模型是经修正的一维管流交通流模型,在运动方程中引入了弛豫项．基于该模型,对上海市内环线的武宁路匝道附近的交通流进行了案例分析,着重对主干道上的右转车辆干扰效应进行了数值模拟,所得结果与实测数据相当符合．分析表明,右转车辆对主干道的“挤压”效应是引起某些交叉口交通拥塞的重要原因,而设置在繁华路口的高架路匝道加剧了这种拥塞状况。     

The effects of heteroaryl ring on the photochromism of diarylethenes with a naphthalene moiety

Three new asymmetrical naphthalene-containing diarylethenes with different heteroaryl groups have been synthesized to investigate the heteroaryl effects on their properties. The three diarylethenes exhibited distinctive photochromism with good thermal stability, which may be attributed to the different heteroaryl effects. Their cycloreversion quantum yields increased in the order of 2-methylbenzofuran < 2-methylbenzothiophene < 1,2-dimethylindole, while the cyclization quantum yields exhibited a reverse trend. Compared to indole and benzothiophene, the benzofuran moiety could effectively shift the absorption maximum to a shorter wavelength and notably enhance the cyclization quantum yield and fluorescence quantum yield of the diarylethene. The results indicated that the category of heteroaryl groups played a vital role during the process of photoisomerization of naphthalene-containing diarylethene derivatives.     

Particle filter based visual tracking with multi-cue adaptive fusion

To improve the robustness of visual tracking in complex environments such as: cluttered backgrounds, partial occlusions, similar distraction and pose variations, a novel tracking method based on adaptive fusion and particle filter is proposed in this paper. In this method, the image color and shape cues are adaptively fused to represent the target observation; fuzzy logic is applied to dynamically adjust each cue weight according to its associated reliability in the past frame; particle filter is adopted to deal with non-linear and non-Gaussian problems in visual tracking. The method is demonstrated to be robust to illumination changes, pose variations, partial occlusions, cluttered backgrounds and camera motion for a test image sequence.     

Track before detect for point targets with particle filter in infrared image sequences

The problem of detecting and tracking point targets in a sequence of infrared images with very low signalto-noise ratio (SNR) is investigated in this paper. A track before detect algorithm for infrared (IR) point target is developed based on particle filter. The particle filter is used to estimate the state of the target in track stage. The unnormalized weights of the output of the filter are used to approximately construct the likelihood ratio for hypothesis test in detection stage. Experiment results with the real image sequences that SNR is about 2.0 show that the proposed algorithm can successfully detect and track point target.