低温高密核物质测量谱仪时间投影室的集团重建

低温高密核物质测量谱仪(CEE)是研究高重子数密度区核物质性质的重离子碰撞实验谱仪。使用了先进的 SAMPA 电子学读出芯片的时间投影室(TPC)是 CEE 最核心的探测器。在集团重建的过程中,同一排读出板的信号被首先重建成 2 维集团,然后根据 2 维集团的 ADC 加权平均位置重建击中点。当信号 ADC 随漂移时间变化呈峰-谷-峰结构时,一个集团可能被重建成两个或更多击中点,从而提高双径迹分辨能力。使用模拟信号的测试显示,该重建算法在$x/ y$方向可以达到0.100/0.043 cm的位置分辨能力和1.1/2.8 cm的双径迹分辨能力。     

基于原子操纵技术的人工量子结构研究

扫描隧道显微镜原子操纵技术是指利用扫描探针在特定材料表面以晶格为步长搬运单个原子或分子的技术.它是纳米尺度量子物理与器件研究领域一种独特而有力的研究手段.利用这种手段,人们能够以原子或分子为单元构筑某些常规生长或微加工方法难以制备的人工量子结构,通过对格点原子、晶格尺寸、对称性、周期性的高度控制,实现对局域电子态、自旋序、以及能带拓扑特性等量子效应的设计与调控.原子操纵技术与超快测量及自动控制技术的结合,使得人们能够进一步研究原子级精准的量子器件,因而该技术成为探索未来器件新机理、新工艺的重要工具.本文首先简介原子操纵方法的发展过程和技术要点,然后分别介绍人工电子晶格、半导体表面人工量子点、磁性人工量子结构、人工结构中的信息存储与逻辑运算、单原子精度原型器件等方面的最新研究进展,以及单原子刻蚀和自动原子操纵等方面的技术进展,最后总结并展望原子操纵技术的应用前景和发展趋势.     

Layer-by-layer assembly of multilayer optical lattices: A theoretical proposal

The European Physical Journal D - This paper describes the verification and validation (V&V) framework developed for the stochastic Particle-in-Cell, Direct Simulation Monte Carlo code...     

Two Families of Entanglement-Assisted Quantum MDS Codes from Cyclic Codes

International Journal of Theoretical Physics - With entanglement-assisted (EA) formalism, arbitrary classical linear codes are allowed to transform into EAQECCs by using pre-shared entanglement...     

Normal Mode Splitting in a Cavity Optomechanical System with a Cubic Anharmonic Oscillator

The strong coupling between a macroscopic mechanical oscillator and a cavity field is essential for many quantum phenomena in a cavity optomechanical system. In this work, we discuss the normal mode splitting in a cavity optomechanical system with a cubic nonlinear movable mirror. We study how the mechanical nonlinearity affects the normal-mode splitting behavior of the movable mirror and the output field. We find that the mechanical nonlinearity can increase the peak separation in the spectra of the movable mirror and the output field. We also find that the heights and linewidths of the two peaks are very sensitive to the mechanical nonlinearity.

     

Bidirectional Controlled Quantum Teleportation of Three-Qubit State by a New Entangled Eleven-Qubit State

In this paper, an improved controlled bidirectional quantum teleportation protocol of the special three-qubit state is proposed. In a little bit more detail, under the control of the third supervisor Charlie, Alice wants to send one special three-qubit entangled state to Bob, and at the meantime, Bob also wants to transmit another special three-qubit entangled state to Alice. In other words, both Alice and Bob can be the sender and receiver simultaneously. To achieve this aim, a specific eleven-qubit entangled state is shared among Alice, Bob and Charlie in advance acting as the quantum channel. Then, Alice and Bob first implement the GHZ-state measurement and Bell-state measurement respectively, and following Charlie’s single-qubit measurement. Finally, upon the foregoing measurement results, Alice and Bob can respectively implement the specific unitary operators on their local particles to recover the initial state transmitted by the other.

     

55 fs,510 mW掺铒光纤飞秒激光器

实验搭建了基于分离脉冲放大及光纤非线性压缩的掺铒光纤激光系统.通过三块长度倍增的YVO4晶体进行偏振复用,实现了八脉冲的分离与合成.探究了不同脉冲宽度的注入条件下分离脉冲主放大器的合成效率.将放大后的脉冲耦合入一段单模保偏光纤中进行非线性压缩,通过控制主放大器的抽运光功率和压缩器的光纤长度,对非线性压缩过程进行优化,获得了重复频率为80.4 MHz、平均功率为510 mW、脉冲宽度为55 fs的超短脉冲.最后,采用MgO∶PPLN晶体进行光学倍频处理,在中心波长783.4 nm处获得了平均功率为146 mW、脉冲宽度为75 fs的倍频光,相应的倍频效率为31％.     

环形磁场金属等离子体源冷却流场的数值模拟与优化

环形磁场金属等离子体源作为一种全新的等离子体源结构,可用于产生高度离化、无大颗粒、高密度的离子束流,但传统流道结构不能保证其高效、均匀散热,大功率工作时可能引起密封胶圈的烧蚀失效,需对其冷却流场进行优化设计.利用Solidworks Flow Simulation软件对等离子体源冷却流道进行模拟,分析出入水孔分布角度、孔数、孔径以及入水孔高度对冷却效果的影响规律,并对流道结构参数进行优化.结果表明,增大水孔的周向分布范围,有利于提高散热的均匀性;入水孔设置在结构上层有利于减少冷却水的温度分层现象,使铜套和密封胶圈都处于较好的冷却状态;适当减小孔径有利于增大冷却水射流速度,增大湍流程度强化传热,提高换热效率.优化后的流场结构可以提高冷却水的利用率,在相同流量条件下获得更好的冷却效果,改善等离子体源的放电稳定性,为环形磁场金属等离子体源的冷却结构设计提供理论依据.     

Tb3+掺杂锂铝硅酸盐玻璃的光致发光和辐照致发光

采用熔融-淬冷法制备了Tb3+掺杂锂铝硅酸盐闪烁玻璃,用紫外激发光谱、发射光谱及荧光寿命表征了光致发光性能,用X射线和阴极射线激发测试了辐射致发光性能。研究结果表明：低Tb3+掺杂浓度时,随着其浓度增大,Tb3+间的交叉弛豫增加导致了5D₃→7F_j跃迁的能量逐渐向5D₄→7F_j迁移转变,5D₃激发态的荧光寿命和发射强度均明显下降,5D₄-7F_j发射强度逐渐增大。较高Tb3+浓度时,其浓度继续增加会提升非辐射比例,是荧光寿命降低和荧光猝灭的最主要原因。比较光致发光和辐照致发光性能,发现随着激发源的能量上升,会增加激发态5D₃能级向5D₄能级的能量转移,同时,由于玻璃的密度低会导致辐照致发光效率随激发源的能量上升而下降。     

Syntheses,Structures, and Photophysical Properties of Two Coordination Polymers Based on 2,3‐Dioxo‐1,2,3,4‐tetrahydroquinoxaline‐6‐carboxylic Acid

Two complexes based on the ligand 1,4‐dihydro‐2,3‐quinoxalinedione, namely [Mn(H₂L)₂(H₂O)₂]_n ( 1 ) and {[Zn₂(H₂L)₂(tz)₂] · 5H₂O}_n ( 2 ) (H₃L = 2,3‐dioxo‐1,2,3,4‐tetrahydroquinoxaline‐6‐carboxylic acid, Htz = 1,2,4‐triazole) were hydrothermally synthesized and characterized by elemental analyses, IR spectroscopy, as well as single‐crystal and powder X‐ray diffraction. Complex 1 exhibited a 1D comb‐like chain formed by H₂L^– anions linking Mn^II ions, whereas complex 2 was a 2D layer‐like structure with square‐shaped windows and outstretched arms built by combination of H₂L^– and tz^– ligands with Zn^II ions. The adjacent chains or layers connected with each other by intermolecular hydrogen bonding and π–π stacking to further extend to a 3D supermolecular framework. In addition, the thermal stabilities, luminescence properties, and optical energy gap of 1 and 2 were investigated in detail.