A High Yield Method of Extracting Alkaloid from Aconitum coreanum by Pulsed Electric Field

A high yield method to extract alkaloids from Aconitum coreanum using pulsed electric field (PEF) was developed, and the optimized extraction method compared to the other four extraction methods, consisting of cold maceration extraction, percolation extraction, heat reflux extraction (HRE), and ultrasonic-assisted extraction (UE). The experimental factors of the extraction methods such as electric field intensity, pulse frequency and solid-to-solvent ratio were evaluated. The content of Guanfu base A (GFA) was quantified by liquid chromatography coupled with electrospray ionization tandem mass spectrometry. The results indicated that the highest yield of GFA was 3.94 mg g^?1 by PEF with conditions of 20 kV cm^?1 electric field intensity, 8 pulse, 1:12 solid-to-solvent ratio, and 90 % ethanol–water solution. Meanwhile, the extraction time of PEF was <1 min, which is much less than the HRE of 10 h and even the newly used technique UE of 40 min. Moreover, the results of PEF extraction method showed obvious advantages, with the highest efficiency (120 L h^?1), the shortest extraction time (0.5–1 min), and the lowest energy costs, which could be applied in the industrial production of alkaloids from A. coreanum. Therefore, the application of the PEF extraction method is a promising and constructive method for extraction of GFA.     

Stereospecific radical polymerization of optically active (S)-N-(2-hydroxy-1-phenylethyl) methacrylamide catalyzed by Lewis acids

The effects of Lewis acids, namely, rare earth metal trifluoromethanesulfonates, on the radical polymerization of (S)-N-(2-hydroxy-1-phenylethyl) methacrylamide were examined under various conditions. In the absence of Lewis acids, syndiotactic-rich polymers (r = 84%) were obtained, whereas in the presence of a catalytic amount of Lewis acids, the polymerization proceeded in an isotactic-specific manner (m up to 64%). Polymerization solvents strongly influenced the effect of the Lewis acids. The polymerization in n-butyl alcohol showed the highest isotactic selectivity, whereas the polymerization in DMSO showed no isotacticity-enhancing effect. Further increases in the Lewis acid concentration and the polymerization temperature did not produce clear effects on the tacticity of the polymers. The interaction between the monomer and Lewis acids was investigated, and the plausible mechanism of stereocontrol in the radical polymerization of (S)-HPEMA was analyzed based on the Lewis acid-monomer interaction.     

Liquid crystalline behaviour of hydrazide derivatives containing alkoxyazobenzene

Two series of dissymmetric hydrazide derivatives containing alkoxyazobenzene with nitro terminal group and octyloxy terminal group, N-4-alkoxyphenyl-N′-4-((4-nitrophenyl)azophenyl) benzohydrazide (Bn-NO₂, n indicates the number of carbon atoms) and N-4-octyloxyphenyl-N′-4-((4-octyloxyphenyl)azophenyl) benzohydrazide (B8-B8), were designed and synthesised, and their liquid crystalline properties were investigated by means of differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. It was found that B8-B8 with octyloxy terminal chains displayed monolayer smectic C phase, whereas Bn-NO₂ with nitro terminal group displayed SmA_d phase, and intermolecular hydrogen bonding was confirmed as the driving force. In addition, the effect of hydrogen bonding, dipole–dipole interactions and steric hindrance effect on the liquid crystalline structures were also discussed.     

Synthesis and characterisation of 3-armed dendritic molecules with triphenylbenzene or triphenyltriazine as core and triphenylene derivative as shells

Two series 3-armed dendritic molecules with their 1,3,5-tris(4-methyloxyphenyl) benzene or 2,4,6-tris(4- hydroxylphenyl)-1,3,5-s-triazine core and triphenylene derivative shells connected by soft hydrocarbon chains have been synthesised and fully characterised. Whether liquid crystal (LC) or photoluminescence materials have been tuned by changing the length of the soft chain and they have been studied by POM, DSC, XRD, UV-Vis and PL. The results show that all the new dendritic compounds display UV to blue fluorescence in solvents such as DCM, THF and acetone. The TC3 compound bearing 1,3,5-tris(4-hydroxylphenyl) benzene core exhibits LC property with rectangular columnar phase (Col_r) on cooling.     

Determination of zinc in marine/lacustrine sediments by graphite furnace atomic absorption spectrometry using Pd/Mg chemical modifier and slurry sampling

Effectiveness of Pd/Mg chemical modifier for the accurate direct determination of zinc in marine/lacustrine sediments by graphite furnace atomic absorption spectrometry (GF-AAS) using slurry samples was evaluated. A calibration curve prepared by aqueous zinc standard solution with addition of Pd/Mg chemical modifier is used to determine the zinc concentration in the sediment. The accuracy of the proposed method was confirmed using Certified Reference Materials, NMIJ CRM 7303-a (lacustrine sediment) from National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology, Japan, and MESS-3 (marine sediment) and PACS-2 (marine sediment) from National Research Council, Canada. The analytical results obtained by employing Pd/Mg modifier are in good agreement with the certified values of all the reference sediment materials. Although for NRC MESS-3 an accurate determination of zinc is achieved even without the chemical modifier, the use of Pd/Mg chemical modifier is recommended as it leads to establishment of a reliable and accurate direct analytical method. One quantitative analysis takes less than 15 minutes after we obtain dried sediment samples, which is several tens of times faster than conventional analytical methods using acid digested sample solutions. The detection limits are 0.13?µg?g^?1 (213.9?nm) and 16?µg?g^?1 (307.6?nm), respectively, in sediment samples, when 40?mg of dried powdered samples are suspended in 20?mL of 0.1?mol?L^?1 nitric acid and a 10?µl portion of the slurry sample is measured. The precision of the proposed method is 8–15% (RSD).     

Facile synthesis of gemini surface-active ATRP initiator and its use in soap-free AGET ATRP mini-emulsion polymerisation

A novel cationic gemini surfactant has been readily synthesised in 70 % total yield. The functional gemini surfactant can act both as an emulsifier and an atom transfer radical polymerisation (ATRP) initiator in mini-emulsion polymerisation of methyl methacrylate (MMA), in which no other emulsifier was required. 1-(Dimethylamino)dodecane (N,N-dimethyldodecylamine, DMDA) was found to be a good ligand in the activator generated by electron transfer (AGET) ATRP reaction. Kinetic studies indicated that the polymerisation featured controlled/living radical polymerisation.     

Excellent degradation performance of azo dye by metallic glass/titanium dioxide composite powders

The metallic glass/titanium dioxide powders (MG/TiO₂) with enhanced photocatalytic oxidation activity were synthesized, which exhibit a higher efficiency in decolorizing methylene blue solutions (MB). Compared with the pure TiO₂ and crystalline alloy/TiO₂ (CA/TiO₂) under the same circumstances, its degradation rate was 60 % and 30 % higher, respectively. Furthermore, compared with the CA/TiO₂, the MG/TiO₂ photocatalytic rate was three times faster when decolorizing MB. Considering the excellent intrinsic high-performance photocatalytic degradation under visible light irradiation, these novel powders were proven to have potential applications in water purification industry.     

Amicoumacins from the marine-derived bacterium Bacillus sp. with the inhibition of NO production

Chemical examination of the fermentation broth of the marine-derived bacterium Bacillus sp. resulted in the isolation of seven new amicoumacin-type isocoumarin derivatives, namely bacillcoumacins A–G (1–7), together with four known analogues. Their structures were elucidated on the basis of extensive spectroscopic analysis, while the absolute configurations of the new compounds were determined by CD, Mosher’s method, and chemical conversion. Compounds 7 and 9 showed inhibitory effects against the NO production induced by lipopolysaccharide (LPS) in mouse macrophage RAW 264.7 cells.     

Crystal Structures and Photoluminescence Properties of Zinc(II) and Cadmium(II) Coordination Polymers with “Y”‐Shaped Ligands

Three Zn^II and Cd^II complexes with Y‐shaped dicarboxylate ligands, namely [Zn(L₁)(2,2′‐bpy)₂(H₂O)] · 2H₂O ( 1 ), [Zn(L₁)(bpp)(H₂O)] ( 2 ), and [Cd(L₁)(H₂O)] · H₂O ( 3 ) [H₂L₁ = N‐phenyliminodiacetic acid, 2,2′‐bpy = 2,2′‐bipyridine, bpp = 1,3‐bis(4‐pyridyl)propane] were synthesized and characterized by elemental analysis, IR spectroscopy single‐crystal X‐ray diffraction, and thermogravimetric analyses. Compound 1 shows an hydrogen‐bonded 2D network, whereas compound 2 is an infinite 1D wavy chain structure, though O–H ··· O hydrogen‐bonded to form a 2D network. Compound 3 displays a 2D uninodal 3‐connected Shubnikov plane net with the point symbol of (4.8²). Moreover, the solid‐state such as thermal stabilities and fluorescence properties of 1 – 3 were also investigated.     

Electrophile-driven copper-catalyzed one-pot synthesis of 3-halogen quinoline derivatives

A convenient and regioselective one-pot synthesis of 3-chloride or 3-bromide quinoline derivatives was achieved through a Grignard addition reaction by alkynyl Grignard regent to o-trifluoroacetyl aniline and a Cu(II)-catalyzed cyclization–halogenation tandem reaction with aqueous HCl or HBr as electrophilic reagent.