Simultaneous determination of thirteen main components and identification of eight major metabolites in Xuebijing Injection by UPLC/Q-TOF

An ultra performance liquid chromatographic method was used for the simultaneous identification and quantification of thirteen main components in Xuebijing Injection, including uridine, gallic acid, guanosine, danshensu, protocatechualdehyde, oxypaeoniflorin, hydroxysafflor yellow A, paeoniflorin, ferulic acid, safflor yellow A, senkyunolide I, senkyunolide H and salvianolic acid B. The chromatographic separation was performed on an Acquity UPLC BEH C₁₈ column (1.7-μm, 2.1 × 100 mm, i.d.) with a gradient elution of acetonitrile and 0.2% acetic acid at a flow rate of 0.4 mL/min. The method was validated for linearity (r ² > 0.9990), intra- and inter-day precision (RSD < 1.94%), accuracy (91.8–99.7%), recovery (96.8–103.8%), limits of detection (0.16–8.0 ng), and limits of quantification (0.54–26.8 ng). At least eight metabolites in prototype were found in rat plasma and urine after intravenous injection of 4 mL/kg doses of Xuebijing Injection. The proposed method could be utilized to qualify and control Xuebijing Injection to ensure its safety and efficacy in application.     

High efficiency palladium catalysts supported on multi-wall carbon nanotubes synthesized with 1,3-bis(diphenylphosphino) propane for ethanol oxidation

In this paper, a facile and effective method is introduced to prepare palladium electrocatalysts for the oxidation of ethanol in alkaline media. According to the transmission electron microscopy measurement, the as-prepared Pd nanoparticles with the average particle size of 2.5 nm are evenly deposited on the surface of the multi-wall carbon nanotubes by using 1,3-bis(diphenylphosphino) propane as a special additive. Electrochemical measurements demonstrate that the as-prepared catalyst exhibits good electrocatalytic activity and stability for the electrooxidation of ethanol.     

Lipid profiling of human plasma from peritoneal dialysis patients using an improved 2D (NP/RP) LC-QToF MS method

An improved online two-dimensional liquid chromatography-quadrupole time-of-flight mass spectrometry (2D LC-QToF MS) system was developed for the lipid profiling of human plasma, in which different lipid classes were separated by the first dimensional normal-phase (NP) LC and different lipid molecular species were separated by the second dimensional reversed-phase (RP) LC. This 2D LC-QToF MS system was built based on a ten-port, two-position valve as the interface, the conditions of which had been optimized and discussed in detail. As two loops were used to trap and transfer the first dimensional elute to the second dimension separately, this new interface suppressed the sample band broadening in the first dimensional column, increased the recovery and repeatability of 2D LC interface, and offered the possibility for the realization of not-stop-flow NP/RP 2D LC system. Finally, 190 endogenous lipid species out of 10 lipid classes were determined within a single run from the plasma of peritoneal patients. This method was also applied to identify the difference in lipid profile between plasma from peritoneal dialysis patients with bad volume status and peritoneal dialysis patients with good volume status. The discovery of 30 potential biomarkers would be helpful to the malnutrition, inflammation, and atherosclerosis syndrome investigation.     

Determination of 48 fragrance allergens in toys using GC with ion trap MS/MS

This paper presents a method for the simultaneous determination of 48 fragrance allergens in four types of toys (plastic toys, play clays, plush toys, and paper toys) based on GC with ion trap MS/MS. Compared with single‐stage MS, MS/MS is superior in terms of the qualification and quantification of a large range of compounds in complicated matrices. Procedures for extraction and purification were optimized for each toy type. The method proved to be linear over a wide range of concentrations for all analytes with correlation coefficients between 0.9768 and 0.9999. Validation parameters, namely, LODs and LOQs, ranged from 0.005–5.0 and from 0.02–20 mg/kg, respectively. Average recoveries of target compounds (spiked at three concentration levels) were in the range of 79.5–109.1%. Intraday and interday repeatabilities of the proposed method varied from 0.7–10.5% and from 3.1–13.4%, respectively. The proposed method was used to monitor fragrance allergens in commercial toy products. Our findings indicate that this method is an accurate and effective technique for analyzing fragrance allergens in materials composed of complex components.     

Rapid determination of α‐tocopherol in cereal grains using dispersive liquid–liquid microextraction followed by HPLC

The traditional for the determination of α‐tocopherol in cereal grains includes saponification of a sample followed by liquid–liquid extraction, and it is time‐ and solvent consuming. In this study, a dispersive liquid–liquid microextraction (DLLME) method was developed to extract α‐tocopherol in situ from the saponified grain sample solution. The DLLME experimental parameters including the type and volume of extractants, the volume of dispersers, the addition of salt and the extraction/centrifuging time were examined and optimized. The recommended analytical procedure showed excellent precision (relative SDs of the α‐tocopherol amount of 3.1% over intraday and 7.2% over interday), high sensitivity (the detection limit of 1.9 ng/mL), and strong recovery values (88.9–102.5%). In addition, statistical analyses showed no significant difference between the detected amounts of α‐tocopherol found by the standardized method and this new procedure. The method was successfully applied to determining the amounts and distribution of α‐tocopherol in 14 cereal grain samples.     

DFT/TDDFT investigation on bis-cyclometalated alkynylgold(III) complex: Comparison of absorption and emission properties

absorption and phosphorescent mechanism of three Au(III) complexes, Au(2,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au25FPh], Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au35FPh], and Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(1H-indole)2 [Au35FID], are calculated and compared using density functional theory (DFT) and time-dependent DFT (TDDFT). The calculated results reveal that enlarging the center C^C^C ligand will result in the enhanced LMCT participation. This theoretical contribution allows design of new Au(Ⅲ) complexes with higher phosphorescence efficiency.     

Colorimetric and ratiometric fluorescent detection of sulfite in water via cationic surfactant-promoted addition of sulfite to α,β-unsaturated ketone

Three fluorescent probes were constructed by incorporating an α,β-unsaturated ketone to a coumarin fluorophore. The selective addition of sulfite to the alkene of TSP assisted by cetyltrimethyl ammonium bromide (CTAB) micelle can be visualized by dramatic color and ratiometric fluorescence changes. In CTAB–PBS system, the fluorescence intensity ratio at 465 nm and 592 nm (I₄₆₅/I₅₉₂) and the absorbance ratio at 390 nm and 470 nm (A₃₉₀/A₄₇₀) were linearly proportional to sulfite concentration in the range of 0.5–150 μM, and the detection limit was 0.2 μM. Good selectivity and competition of TSP1 towards sulfite over several anions and biological thiols were acquired. Probe TSP1 was used to detect sulfite in three realistic samples (mineral water, sugar and white wine) with good recovery.     

Automated high performance liquid chromatography with on-line reduction of disulfides and chemiluminescence detection for determination of thiols and disulfides in biological fluids

In general, the reduction of disulfide bonds with tris(2-carboxyethyl)phosphine (TCEP) is performed using off-line operation, which is not only time-consuming but also vulnerable to the spontaneous re-oxidation of thiols during sample preparation and subsequent analysis procedures. To the best of our knowledge, there has been not any case on the on-line reduction for biological disulfides coupled with high performance liquid chromatography (HPLC). In this study, these obstacles are overcome by packing Zn(II)-TCEP complexes into a home-made column. The as-synthesized Zn(II)-TCEP complexes enable efficient reduction of disulfide bonds at pH 3.0. This acidic pH value was compatible with that of the mobile phase for HPLC separation of thiols and disulfides. Therefore, using fluorosurfactant-prepared triangular gold nanoparticles as HPLC postcolumn specific chemiluminescence (CL) reagents for thiols, the feasibility of the established on-line reduction column has been confirmed for the direct identification of both thiols and disulfides by incorporating this reduction column into a single chromatographic separation. Detection limits for these analytes range from 8.3 to 25.4 nM and the linear range in a log–log plot can comprise three orders of magnitude. Finally, the utility of this automated on-line reduction of disulfides-HPLC-CL system has been demonstrated for the reliable determination of thiols and disulfides in human urine and plasma samples.     

Development of a Sensitive Method for the Determination of 4‐(Methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol in Human Urine Using Solid‐phase Extraction Combined with Ultrasound‐assisted Dispersive Liquid–liquid Microextraction and LC‐MS/MS Detection

An efficient and sensitive analytical method based on molecularly imprinted solid‐phase extraction (MISPE) and reverse‐phase ultrasound‐assisted dispersive liquid–liquid microextraction (USA‐DLLME) coupled with LC–MS/MS detection was developed and validated for the analysis of urinary 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol (NNAL), a tobacco‐specific nitrosamine metabolite. The extraction performances of NNAL on three different solid‐phase extraction (SPE) sorbents including the hydrophilic‐lipophilic balanced sorbent HLB, the mixed mode cationic MCX sorbent and the molecularly imprinted polymers (MIP) sorbent were evaluated. Experimental results showed that the analyte was well retained with the highest extraction recovery and the optimum purification effect on MIP. Under the optimized conditions of MIP and USA‐DLLME, an enrichment factor of 23 was obtained. Good linearity relationship was obtained in the range of 5‐1200 pg/mL with a correlation coefficient of 0.9953. The limit of detection (LOD) was 0.35 pg/mL. The recoveries at three spiked levels ranged between 88.5% and 93.7%. Intra‐ and inter‐day relative standard deviations varied from 3.6% to 7.4% and from 5.4% to 9.7%, respectively. The developed method combing the advantages of MISPE and DLLME significantly improves the purification and enrichment of the analyte and can be used as an effective approach for the determination of ultra‐trace NNAL in complex biological matrices.