Leakage of immobilized IgG from therapeutic immunoadsorbents

In developing therapeutic immunoadsorbents (IAs), antibodies (IgG molecules) covalently immobilized on porous carriers, a leak of IgG was determined both in the storage test with buffers at 25 and 4 degrees C and in contact with plasma at room temperature (RT). The amount of antibody released from therapeutic IAs must be minimized to avoid side effects during treatment. The amount of IgG released was a. Dependent on the amount of IgG immobilized b. Much greater with CNBr-activated Sepharose 4B, or Formyl-Cellulofine as a support material than with aminopropyl CPG (controlled pore glass) c. Found to yield again during another storage in buffers after the IAs were washed and their buffers replaced with fresh ones and d. Decreased after the IAs were treated with glutaraldehyde (GA) solutions. Whereas treating the IAs with GA solutions significantly reduced the amount of IgG released, it caused some deterioration of the adsorption characteristics of the IAs. An irradiation dose of 2.5 Mrad as a crosslinking procedure also reduced the amount of IgG released; its effect was comparable to that of 0.025% GA, the lowest concentration used.     

The study of sensitivity and resolution of microautoradiography using Auger electrons

By using low energy beta emitter to microautoradiography, it is expected that high resolution microautoradiogram can be made. In this report, the authors pay attention to the use of monochromatic and low energy electron on the metallic samples, and used⁵¹Cr that emits Auger electrons with the energy of 4.5keV and⁶⁵Zn that emits Auger electrons with energy of 7keV in the study of the resolution of Auger electron microautoradiograph. From the results of the study, it was clearly confirmed that the resolution of the microautoradiograph using⁵¹Cr was better than 0.5 m and the resolution using⁶⁵Zn was better than 1 m.In order to make high resolution microautoradiograph, it is essentially important to know the sensitivity of the nuclear emulsion to the low energy electrons in advance, for securing the reasonable exposure to the nuclear emulsion. In this regard, the investigation on the sensitivities of those emulsions to the Auger electrons with the energy of 5.4keV from⁵⁵Fe and 7keV from⁶⁵Zn was made using Ilford and Fuji nuclear emulsions.     

Moment theory for the analytical determination of rate constants for solute permeation at the interface of spherical molecular aggregates

Moment equations were developed on the basis of the Einstein equation for diffusion and the random walk model to analytically determine the rate constant for the interfacial solute permeation from a bulk solvent into molecular aggregates (k_in) and the inverse rate constant from the molecular aggregates to the bulk solvent (k_out). The moment equations were in good agreement with those derived in a different manner. To demonstrate their effectiveness in one concrete example, the moment equations were used to analytically determine the values of k_in and k_out of three electrically neutral solutes, i.e. resorcinol, phenol, and nitrobenzene, from the first absolute (μ_1A) and second central (μ_2C) moments of their elution peaks, as measured by electrokinetic chromatography (EKC), in which the sodium dodecyl sulfate (SDS) micelles were used as a pseudostationary phase. The values of k_in and k_out should be determined with no chemical modifications and no physical action with the molecular aggregates because they are dynamic systems formed through weak interactions between the components. The moment analysis of the elution peak profiles measured by EKC is effective to unambiguously determine k_in, k_out, and the partition equilibrium constant (k_in/k_out) under appropriate experimental conditions.     

Crystal field calculation of g values and zero-field splitting for high spin ferric complexes of rhombic character

For high spin ferric ions in rhombic symmetry, we have used a crystal field model to relate term splittings of the ⁴ T ₁, ² T ₂ and ⁴ T ₂ excited states to zerofield split energies and g values of the ⁶ A ₁ term. In this model five crystal field parameters were used, namely, one cubic parameter, two tetragonal parameters and second and fourth order rhombic parameters. In tetragonal symmetry with only three crystal field parameters, a simpler model including only the ⁴ T ₁ and ² T ₂ excited states is adequate to relate term energies to g values and zero-field split energies. However, we have demonstrated the importance of the ⁴ T ₂ state in rhombic crystalline fields. No higher lying terms other than ⁴ T ₂ can influence the ⁴ T ₁ term directly through the tetragonal or rhombic crystal field, Furthermore, we show that the fourth order rhombic crystal field parameter is a key parameter because the rhombic splitting of the dominant low lying ⁴ T ₁ term of high spin ferric complexes depends to first order on the fourth order crystal field potential. We have performed a computer diagonalization of the spin-orbit, electrostatic and crystal field perturbation matrix, and calculated g values and zero-field splittings in seventeen high spin ferric mixed crystalline species of varying rhombicities and for metmyoglobin and cytochrome P-450. The high spin and spin-mixed regions are developed completely to yield the crystal field term energies, zero-field splittings and basis functions together with g values.     

Synthesis and redox behavior of ruthenocene-terminated oligoenes: characteristic and stable two-electron redox system and lower potential shift of the two-electron oxidation wave with elongating conjugation

Ruthenocene-terminated butadienes and hexatrienes were prepared by the Wittig reaction of 3-ruthenocenyl-2-propenals with ruthenocenylmethylphosphonium salts and the Mukaiyama coupling of the propenals, respectively. Cyclic voltammetry of these complexes indicated that they were involved in a stable two-electron redox process. The oxidation potentials for ruthenocene-terminated oligoenes shifted progressively to lower potential with the increasing CH==CH units as follows: Rc--Rc (0.32 V)>RcCH==CHRc (+0.09 V)>Rc(CH==CH)(2)Rc (-0.06 V)>Rc(CH==CH)(3)Rc (-0.07 V), (Rc=ruthenocene). The tendency is in remarkable contrast to that in the successive one-electron redox process. These complexes were chemically oxidized to give stable crystalline solids, whose structures were confirmed by NMR spectroscopy and X-ray analysis to be oligoene analogues of a bis(fulvene) complex, for example, [(eta(5)-C(5)Me(5))Ru[mu(2)-eta(6):eta(6)-C(5)H(4)CH(CH==CH)(n)CHC(5)H(4)]Ru(eta(5)-C(5)Me(5))](2+) (n=1 or 2). The DFT calculation of the two-electron-oxidized species reproduced well the fulvene-complex structure for the ruthenocene moieties. Since both the neutral and oxidized species are stable and chemically reversible, this redox system may be serviceable as a two-electron version of the ferrocene one-electron redox system.     

Vinyl polymerization initiated by the (dimethylaniline-n-oxide)/(phenacyl bromide) system

Binary systems consisting of dimethylaniline-N-oxide (DMOA) and some α-halo-carbonyl compounds, such as phenacyl halide and α-halo-acetic acid ester, were found to induce radical polymerization of vinyl monomers. Bromo-derivatives showed higher initiating activities than chloroderivatives. The polymerization of methyl methacrylate (MMA) with DMAO and phenacyl bromide (PBr) was investigated kinetically. The polymerization rate (R_p) was expressed as follows; $\text{R}{}_{\mathrm{<mtext>p</mtext>}}\text{=}\text{k[DMAO]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{[}\text{PBr}\text{]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{[}\text{MMA}\text{]}$.The overall activation energy of the polymerization was calculated to be 42.7 kJ mol^?1. No noticeable chain-transfer from the polymer radical to DMAO or PBr was observed. The benzoyl radical was trapped by 2-nitroso-2-methylpropane, a spin trapping reagent, in the reaction of DMAO and PBr. The u.v. spectrum of poly (MMA) obtained suggests that the polymer contains end-groups similar to acetophenone and DMA. From the results, an initiation mechanism for the polymerization has been proposed and discussed.     

Electrical conductivity of Th3P4-type EnLn2S4

Electrical conductivity measurements of Th₃P₄-type EuLn₂S₄ (Ln = LaGd) compounds have been made as functions of temperature and sulfur vapor pressure. These compounds are all p-type semiconductors, and their conductivities at room temperature have almost the same values for the specimens from EuLa₂S₄ to EuNd₂S₄ but increase on going from EnNd₂S₄ to EuGd₂S₄. In addition, the conductivity of EuGd₂S₄ is sensitive to sulfur vapor pressure and obeys the relationship . The mechanism of electrical transport in these compounds is discussed.     

Chain‐transfer reaction in the radical polymerization of di‐n‐butyl itaconate at high temperatures

Radical polymerizations of di‐n‐butyl itaconate were investigated. Unexpected resonances (C resonances) were observed in ¹³C NMR spectra of C?O of poly(di‐n‐butyl itaconate)s [poly(DBI)s] obtained at temperatures higher than 60 °C, although two kinds of carbonyl groups showed splittings due to triad tacticities in the spectra of polymers obtained at lower temperatures. The poly(DBI)s formed by the different kinds of initiators or formed in the presence of chain‐transfer agents showed hardly any changes in the intensities of the C resonances; this indicated that the C resonances were not due to the structures formed through initiating and terminating reactions. The poly(DBI)s obtained at different yields showed only a slight increase in the intensities of the C resonances with the yield, which suggested that the C resonances were not attributable to the intermolecular chain‐transfer reaction to the monomer and/or polymer. However, the intensities of the C resonances significantly increased with a decreasing feed monomer concentration; this suggested that intramolecular chain‐transfer reactions took place at high temperatures. Furthermore, a Cu complex‐catalyzed atom transfer radical polymerization mechanism was revealed to be effective for suppressing the intramolecular chain‐transfer reaction at 60 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2415–2426, 2002     

An allyltitanium derived from acrolein 1,2-dicyclohexylethylene acetal and (eta(2)-propene)Ti(O-i-Pr)(2) as a chiral propionaldehyde homoenolate equivalent that reacts with imines with excellent stereoselectivity. An efficient and practical access to optically active gamma-amino carbonyl compounds

A chiral allyltitanium compound 2, prepared in situ by the reaction of optically active acrolein 1,2-dicyclohexylethylene acetal (3) with (eta(2)-propene)Ti(O-i-Pr)(2) (1), reacts with a variety of acyclic and cyclic imines 4 in a regiospecific way to afford alpha-addition products 5 as a mixture of the E- and Z-isomers in good combined yield, where the former is predominant in a ratio of 92:8 to >95:5. The mixture of (E)- and (Z)-5 and pure (E)-5 which could be isolated in several cases were respectively converted to the corresponding beta-amino ester 6 to confirm the absolute configuration and enantiomeric purity. The ee of the newly formed asymmetric center of 5 is more than 78% for the mixture of (E)- and (Z)-5 and more than 96% for pure (E)-5. By taking advantage of the versatility of the vinyl ether moiety in 5, optically active gamma-amino aldehydes 8, gamma-amino aldehyde acetals 7 and 10, gamma-amino acids 9, beta-amino esters 6, and pyrrolidinoisoquinolines 12 were readily prepared. In the reaction of 2 with optically active alpha-silyloxyimine 4n, remarkable double stereodifferentiation was observed; thus, the reaction of 2 derived from (S,S)- or (R,R)-3 provided syn- and anti-5n in a ratio of 55:45 or 0:100, respectively. Meanwhile, the stereochemistry of the product in the reaction of 2 with beta-silyloxyimine 4o was controlled mainly by 2. Thus, the reaction of beta-silyloxyimine 14 with 2 derived from 1 and (R,R)-3 afforded gamma-silyloxyimine 15 with 92% diastereoselectivity, from which 4-amino-6-hydroxypentadecanal dimethyl acetal (13), a key intermediate for the synthesis of batzelladine D, was synthesized.     

Sterilization of health care products by 5 MeV bremsstrahlung (X ray)

Radiation sensitivities of . pumilus and spores were examined to bremsstrahlung of 5 MeV EB and Cobalt -60 γ rays in order to confirm the effects of radiation and dose rate. Biological indicators (SPORTROL, NAmSA, USA) were irradiated with the X ray in the dose rate range of 4.7–47kGy/h. D-value of spores was 1.4–1.5 kGy, and that of was 1.1–1.3 kGy. The D-values of and have very small dose rate dependences to X ray, and the D-values are similar to those of γ ray. Dose distribution by X-ray and γ irradiation was measured for cartons containing 32 unit dialyzers. The D_max./D_min. of the X-ray irradiation (1.2) was smaller than that of γ ray (1.3).