Evaluation of interactions between metal ions and nonionic surfactants in high-concentration HCl using low-pressure high-performance liquid chromatography with low-flow-resistance polystyrene-based monolithic column

A method for evaluating the interactions between metal ions and nonionic surfactants in aqueous solutions containing high-concentration HCl, using gas pressure-driven low-pressure high-performance liquid chromatography (LP-HPLC) as a highly acid-resistant HPLC system, was developed. To construct the LP-HPLC for this purpose, poly(styrene-co-divinylbenzene)-based low-flow-resistance monolithic columns tolerant to highly acidic conditions were prepared using low-conversion thermal polymerization. Thermal polymerization at 65 °C for 1.5 h (monomer conversions, 33 % for styrene and 59 % for divinylbenzene) allowed preparation of a column with both high separation efficiency (around 60,000 plates m^?1 for alkylbenzenes) and a quite low back pressure of 0.14 MPa at a linear flow rate of 1 mm s^?1 (2.8?×?10^?13 m² in permeability). The base column prepared under the above conditions was coated with a nonionic surfactant, polyoxyethylene nonylphenyl ether (PONPE, average oxyethylene unit numbers (n)?=?3, 7.5, 15, and 20), and used for evaluation of the interactions between PONPEs and metal ions in 6 M HCl. The interactions between PONPEs and Au(III), Ga(III), Fe(III), Zn(II), and Cu(II) were successfully evaluated using both breakthrough and chromatographic methods. Furthermore, a study of the effect of the polyoxyethylene (POE) chain length revealed that the use of PONPE with the longer POE moiety enhanced the magnitude of the interaction together with the increase in the amount of oxyethylene (OE) units coated on the monolith. Moreover, the interactions of metal ions with a single OE unit were almost constant in the range of n?=?7.5–20, whereas the suppression of the interaction between Au(III) with the shortest PONPE chain (n?=?3) was also observed.

Unique inclusion behaviour of 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetraaminothiacalix[4]-arene towards small organic molecules

Tetraaminothiacalixarene 3, bearing four amino groups instead of the hydroxy groups of p-tert-butylthiacalix[4]arene 2, exhibits inclusion properties different from those of compound 2 towards small organic molecules upon crystallisation from neat solvents or guest solutions. X-ray crystallographic analyses reveal that nitromethane and acetonitrile are included into the cone-shaped cavity of compound 3, as is often seen in inclusion crystals of compound 2, whereas dichloromethane occupies a space between two distal benzene rings of compound 3, adopting a 1,3-alternate conformation. Acetic acid, which forms a dimer, fills a pore surrounded by four host molecules with a pinched cone conformation. Furthermore, guest-free crystals of compound 3 with a 1,3-alternate conformation absorb acetonitrile to give inclusion crystals with the same crystal structure as that obtained by the crystallisation. Thus, compound 3 flexibly changes its conformation according to the structures of guest compounds.     

Relief inventory modelling with stochastic lead-time and demand

The irregular demand and communication network disruption that are characteristics of situations demanding humanitarian logistics, particularly after large-scale earthquakes, present a unique challenge for relief inventory modelling. However, there are few quantitative inventory models in humanitarian logistics, and assumptions inherent in commercial logistics naturally have little applicability to humanitarian logistics. This paper develops a humanitarian disaster relief inventory model that assumes a uniformly distributed function in both lead-time and demand parameters, which is appropriate considering the limited historical data on relief operation. Furthermore, this paper presents different combinations of lead-time and demand scenarios to demonstrate the variability of the model. This is followed by the discussion of a case study wherein the decision variables are evaluated and sensitivity analysis is performed. The results reveal the presence of a unique reorder level in the inventory wherever the order quantity is insensitive to some lead-time demand values, providing valuable direction for humanitarian relief planning efforts and future research.     

Induction of pluripotency by defined factors

The “reversion of cell fate from differentiated states back into totipotent or pluripotent states” has been an interest of many scientists for a long time. With the help of knowledge accumulated by those scientists, we succeeded in converting somatic cells to a pluripotent cell lineage by the forced expression of defined factors. These established induced pluripotent stem (iPS) cells have similar features to embryonic stem (ES) cells, including pluripotency and immortality. The iPS cell technology provides unprecedented opportunities for regenerative medicine and drug discovery.     

Binding of Scandium Ions to Metalloporphyrin–Flavin Complexes for Long‐Lived Charge Separation

A porphyrin–flavin‐linked dyad and its zinc and palladium complexes (MPor?Fl: 2 ?M, M=2 H, Zn, and Pd) were newly synthesized and the X‐ray crystal structure of 2 ?Pd was determined. The photodynamics of 2 ?M were examined by femto‐ and nanosecond laser flash photolysis measurements. Photoinduced electron transfer (ET) in 2 ?H₂ occurred from the singlet excited state of the porphyrin moiety (H₂Por) to the flavin (Fl) moiety to produce the singlet charge‐separated (CS) state ¹(H₂Por^.+?Fl^.?), which decayed through back ET (BET) to form ³[H₂Por]*?Fl with rate constants of 1.2×10¹⁰ and 1.2×10⁹ s^?1, respectively. Similarly, photoinduced ET in 2 ?Pd afforded the singlet CS state, which decayed through BET to form ³[PdPor]*?Fl with rate constants of 2.1×10¹¹ and 6.0×10¹⁰ s^?1, respectively. The rate constant of photoinduced ET and BET of 2 ?M were related to the ET and BET driving forces by using the Marcus theory of ET. One and two Sc³⁺ ions bind to the flavin moiety to form the Fl?Sc³⁺ and Fl?(Sc³⁺)₂ complexes with binding constants of K₁=2.2×10⁵ M ^?1 and K₂=1.8×10³ M ^?1, respectively. Other metal ions, such as Y³⁺, Zn²⁺, and Mg²⁺, form only 1:1 complexes with flavin. In contrast to 2 ?M and the 1:1 complexes with metal ions, which afforded the short‐lived singlet CS state, photoinduced ET in 2 ?Pd???Sc³⁺ complexes afforded the triplet CS state (³[PdPor^.+?Fl^.??(Sc³⁺)₂]), which exhibited a remarkably long lifetime of τ=110 ms (k_BET=9.1 s^?1).     

Hydrazide and hydrazine reagents as reactive matrices for MALDI‐MS to detect gaseous aldehydes

The reagents 19 hydrazide and 14 hydrazine were examined to function as reactive matrices for matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) to detect gaseous aldehydes. Among them, two hydrazide (2‐hydroxybenzohydrazide and 3‐hydroxy‐2‐naphthoic acid hydrazide) and two hydrazine reagents [2‐hydrazinoquinoline and 2,4‐dinitrophenylhydrazine (DNPH)] were found to react efficiently with carbonyl groups of gaseous aldehydes (formaldehyde, acetaldehyde and propionaldehyde); these are the main factors for sick building syndrome and operate as reactive matrices for MALDI‐MS. Results from accurate mass measurements by JMS‐S3000 Spiral‐TOF suggested that protonated ion peaks corresponding to [M + H]⁺ from the resulting derivatives were observed in all cases with the gaseous aldehydes in an incubation, time‐dependent manner. The two hydrazide and two hydrazine reagents all possessed absorbances at 337 nm (wavelength of MALDI nitrogen laser), with, significant electrical conductivity of the matrix crystal and functional groups, such as hydroxy group and amino group, being important for desorption/ionization efficiency in MALDI‐MS. To our knowledge, this is the first report that gaseous molecules could be derivatized and detected directly in a single step by MALDI‐MS using novel reactive matrices that were derivatizing agents with the ability to enhance desorption/ionization efficiency. Copyright © 2014 John Wiley & Sons, Ltd.     

Selective Aerobic Oxidation of Primary Alcohols to Aldehydes over Nb2O5 Photocatalyst with Visible Light

Primary alcohols are selectively converted into aldehydes by using a Nb₂O₅ photocatalyst under visible‐light irradiation. A strong interaction between the alcohol and Nb₂O₅ generates a donor level within the forbidden band of Nb₂O₅, which provides a visible‐light‐harvesting ability. Over oxidation of aldehydes into carboxylic acids does not proceed under visible‐light irradiation.     

Analyte zone sharpening in pressurized capillary electrochromatography based on electrophoretic migration under a heterogeneous field

Significant peak width reductions, or peak height enhancements, of angiotensins were observed when a high voltage was applied to hydrophilic interaction pressurized capillary electrochromatography using gradient elution with mobile phases containing perchloric acid. The investigation using a contactless conductivity detector revealed that perchloric acid was adsorbed on the surface of the stationary phase, when the acetonitrile content in the mobile phase was high, and released from the stationary phase by increasing the water content during a gradient procedure. The released perchloric acid formed a highly concentrated zone moving from the column inlet to the outlet. The electrochromatographic behavior of the analytes, primarily electrophoretic migration, was changed in this zone. As a consequence of the significant variation in migration velocity of the analytes, the sample band width was reduced similar fashion to on‐capillary concentration in capillary electrophoresis. Using this result, the reduction of band width and enhancement in separation efficiency was demonstrated in reversed‐phase pressurized electrochromatography, in which the conductivity of the mobile phase was significantly altered using a step gradient. The resolution between benzoic acid and 1‐naphthalene sulfonic acid was successfully improved from 2.7 to 4.3 by using the band width reduction method based on field‐amplified stacking.     

Target-specific chemical acylation of lectins by ligand-tethered DMAP catalysts

Because sugar-binding proteins, so-called lectins, play important roles in many biological phenomena, the lectin-selective labeling should be useful for investigating biological processes involving lectins as well as providing molecular tools for analysis of saccharides and these derivatives. We describe herein a new strategy for lectin-selective labeling based on an acyl transfer reaction directed by ligand-tethered DMAP (4-dimethylaminopyridine). DMAP is an effective acyl transfer catalyst, which can activate an acyl ester for its transfer to a nucleophilic residue. To direct the acyl transfer reaction to a lectin of interest, we attached the DMAP to a saccharide ligand specific for the target lectin. It was clearly demonstrated by biochemical analyses that the target-selective labeling of Congerin II, an animal lectin having selective affinity for Lactose/LacNAc (N-acetyllactosamine), was achieved in the presence of Lac-tethered DMAPs and acyl donors containing probes such as fluorescent molecules or biotin. Conventional peptide mapping experiments using HPLC and tandem mass-mass analysis revealed that the acyl transfer reaction site-specifically occurred at Tyr 51 of Cong II. This strategy was successfully extended to other lectins by changing the ligand part of the ligand-tethered DMAP. We also demonstrated that this labeling method is applicable not only to purified lectin in test tubes, but also to crude mixtures such as E. coli lysates or homogenized animal tissue samples expressing Congerin.     

Electronic structure of Co(III) doped bromo-bridged Ni complexes, [Ni1-xCox(chxn)2Br]Br2

This article describes the electronic structure of the Co(III) doped Br bridged Ni(III) complexes, [Ni(1-x)Cox(chxn)2Br]Br2 (x = 0.01, 0.02, 0.05, and 0.11) by using a optical spectroscopy, scanning tunneling microscopy (STM), and electron spin resonance spectroscopy. In the optical reflectivity spectrum, the new band was formed at about 0.5 eV, which is reasonably recognized as the d(z2) band of doped Co(III) ions. In the STM images of [Ni(1-x)Cox(chxn)2Br]Br2, the bright spots attributable to the tunnel current from the Fermi level of the STM tip to the conduction band of the sample were observed. In addition, some brighter spots were also observed. Because the number of the brighter spots is in good agreement with that of doped Co species, the brighter spots can be assigned to doped Co(III) sites. These are reasonably explained by the tunnel current from the Fermi level of the tip to the d(z2) band of Co(III). The Curie spin concentration was gradually increased with increasing Co(III) ions, which is explained by the scissions of the S = 1/2 1D antiferromagnetic chains.