Estimation of electrophoretic mobilities of red blood cells in 1-G and microgravity using a miniature capillary electrophoresis unit

Electrophoretic mobilities of red blood cells (RBCs) were measured in microgravity using a home-made capillary electrophoresis unit, which consisted of two small reservoirs of 0.6 mL and a fused-silica capillary tubing with 2 cm in length and 50 num in inner diameter. Migration of RBCs was observed by a microscope at 1000 times magnification and recorded on a videotape. The experiments were performed during stays in microgravity (about 0.01 G), which lasted 20 s and were attained by parabolic flights of an aircraft. On average, the electrophoretic mobilities of RBCs determined in microgravity were about 30% higher than those measured at 1-G condition irrespectively whether the cells were suspended in saline or serum during measurements. This difference might be explained as being mainly due to the cell floating in microgravity. Morphological changes of RBCs may contribute partly to the difference, while the variation in viscosity of the medium under microgravity could play only a minor role.     

Asymmetric hydrogenation of chiral pyruvamides

Asymmetric catalytic hydrogenations of three kinds of chiral pyruvamides were carried out using palladium on charcoal as a catalyst to give lactamides with diastereomeric ratios ranging from 76:24 to 98:2.     

Adsorption of humic acid on goethite: isotherms, charge adjustments, and potential profiles

The adsorption of natural organic matter (NOM) on mineral (hydr)oxide plays an important role in the evaluation of the speciation of toxic metal ions in the environment. Because both NOM and mineral oxide have variable charges that adjust upon adsorption, a good understanding of proton binding is required before the binding of metal ions can be understood. In this study, the adsorption of purified Aldrich humic acid (PAHA) on goethite was examined as a function of the environmental conditions (pH, salt concentration, and free concentration of PAHA) together with the proton adsorption to PAHA, goethite, and their mixtures. The induced charges on both components were separated on the basis of the difference between the charge/pH curves of the mixture and those of the single components. The electrostatic potential profile across the adsorbed layer was obtained as a numerical solution of the Poisson-Boltzmann equation using the charge density of the adsorbed PAHA and the goethite surface. From the quantitative evaluation of the induced charge on both components, it is revealed that the degree of the charge adjustment is related to the electrostatic affinity between the PAHA segments and the goethite surface, the electrostatic repulsion between the PAHA segments, and the electrostatic shielding by salt ions. Considering the charge distribution of the adsorbed PAHA at the goethite surface, it is concluded that the change of the charge adjustment is sensitive to that of the conformation of the adsorbed PAHA. From the detailed inspection of the assumptions made and the comparison with the reported theoretical calculations, the obtained potential profiles are considered to broadly reflect the true potential profiles. Because a charge adjustment is not frequently considered in detail in relation to the NOM adsorption on metal (hydr)oxides, the obtained results can form the basis for the further development of modeling of the adsorption of NOM on (hydr)oxide surfaces.     

Study of flow rate in pressurized gradient capillary electrochromatography using splitter and separation of peptides using an Amide stationary phase

A pressurized gradient capillary electrochromatograph using a splitter was constructed. The variation in flow rate during gradient elution was investigated and separations of peptides using an Amide stationary phase were demonstrated. The flow rate, which is one of the important factors to control chromatographic behavior, was increased during the gradient elution, and the mismatching of mobile phase between the column and the resistance tubing derived three variation patterns in the flow rate. The electrophoretic migration in electrochromatography could enhance in separation of peptides. The separated peak number of tryptic digest of bovine serum albumin was increased from 30 to 40 by the application of +5 kV.     

Processing and characterization of Pb(Mg,Nb)O3-PbTiO3 thin films from metal alkoxide-derived gels

The sol-gel processing is one of promising methods to fabricate well-derived integrated thin films at relatively low temperature. Ferroelectric niobates films do afford the possibilities for adding the values by the hybridization with semiconductor and/or electro-optic systems. The molecular level designing of the precursor solution was stressed as well as the control of key processing factors. The advantages of this sol-gel have been extended to prepare the ferroelectric Pb(Mg, Nb)O₃-PbTiO₃ solid solution films integrated on Si wafers. The crystallization of the films with desired crystal structure could be promoted by the controlled partial hydrolysis of designed alkoxide solution in the intermediate state and the pre-heated treatment of alkoxide-derived films in flow of water vapor and oxygen gas mixture.     

A Dodecalanthanide Wheel Supported by p‐tert‐Butylsulfonylcalix[4]arene

A dodecaholmium wheel of [Ho₁₂(L)₆(mal)₄(AcO)₄(H₂O)₁₄] ( 1 ; mal=malonate) was synthesized by using p‐tert‐butylsulfonylcalix[4]arene (H₄L) as a cluster‐forming ligand. The wheel consists of three fragments of mononuclear A^3? ([Ho(L)(mal)(H₂O)]^3?), trinuclear B^3? ([Ho(H₂O)₂(mal)(Ho(L)(AcO))₂]^3?), and C³⁺ ([Ho(H₂O)₂]³⁺), and an alternate arrangement of these fragments (A^3?? C³⁺? B^3?? C³⁺? A^3?? C³⁺? B^3?? C³⁺? ) results in a wheel structure. The longest and shortest diameters of the core were estimated to be 17.7562(16) and 13.6810(13) Å, respectively, and the saddle‐shaped molecule possesses a pocketlike cavity inside.     

Skeletal diversity by allylation/RCM on Ugi four-component coupling reaction products

Here, we report a diversity-oriented synthetic approach toward skeletally diverse, cyclized peptidomimetics with diverse appendages. Starting from α-(N-acylamino)amides with various appendages, 12 to 16-membered lactams with defined olefin geometry were synthesized by a common synthetic sequence. We also synthesized the macrocycle in a liquid phase directed toward a construction of the peptidomimetics library.     

1-D cobalt(II) spin transition compound with strong interchain interaction: [Co(pyterpy)Cl(2)].X

Cobalt(II) compounds [Co(pyterpy)Cl(2)].MeOH (1.(MeOH)) and [Co(pyterpy)Cl(2)].2H(2)O (1.(2H(2)O)) were synthesized. The compound 1.(MeOH) forms the quasi 3-D networks by making pi-pi stacking between the 1-D chains. The methanol molecules from 1.(MeOH) can be removed by heating, and substituted by absorption of water molecules. The MeOH molecules in 1.(MeOH) are removed by heating at 410 K, and they are substituted by water molecules to form 1.(2H(2)O). 1.(2H(2)O) exhibits a S = (3)/(2) (HS) left arrow over right arrow S = (1)/(2) (LS) spin transition with a thermal hysteresis. We have succeeded in constructing a guest dependent 1-D spin-crossover cobalt(II) compound.     

Total Synthesis of Sialylated Glycans Related to Avian and Human Influenza Virus Infection

Human and avian influenza type A viruses bind sialylated pentasaccharides. Herein, the total synthesis of four of these glycans is reported. Efficient sialylations relied on two N‐Troc‐protected (Troc=2,2,2‐trichloroethoxycarbonyl) sialic acid building blocks. The first, a thiophenyl glycoside, readily produced the sialyl‐α(2‐6)galactose disaccharide. Combination of the second building block, a novel glycosyl phosphite, and a benzylidene‐protected galactoside produced the best results for the formation of the sialyl‐α(2‐3)galactose. Two common trisaccharides were assembled by the introduction of glucose, galactose, and glucosamine building blocks followed by selective deprotection. Two sets of pentasaccharides were obtained by the union of two sialylgalactose N‐phenyl trifluoroacetimidate building blocks with the two trisaccharides above. Global deprotection furnished the desired pentasaccharides. The products of these total syntheses are currently employed on the surface of carbohydrate microarrays to detect and type different strains of the influenza virus.     

Structural assignment of isomeric 2-aminopyridine-derivatized oligosaccharides using negative-ion MSn spectral matching

To investigate the possibility of structural assignment based on negative-ion MS2 spectral matching, three isomeric pairs of 2-aminopyridine (PA)-derivatized non-fucosylated, fucosylated, and sialylated oligosaccharides (complex type N-glycans) were analyzed using high-performance liquid chromatography/ion trap mass spectrometry (HPLC/ITMS) with a sonic-spray ionization (SSI) source. In the SSI negative-ion mode the deprotonated molecule [M-2H]2- becomes prominent. Negative-ion MS2 spectra derived from such ions contain many fragment types (B and Y, C and Z, A, and D) and therefore are more informative than the positive-ion MS2 spectra derived from [M+H+Na]2+ ions, which usually consist mainly of B and Y fragment ions. In particular the internal ions (D- and E-type ions) provided useful information about the alpha1-6 branching patterns and the bisecting GlcNAc residue. Spectral matching based on the correlation coefficients between negative-ion MS2 spectra was performed in a manner similar to the positive-ion MS2 spectral matching previously reported. It was demonstrated that negative-ion MS2 spectral matching is as useful and applicable to the structural assignment of relatively large non-fucosylated, fucosylated, and sialylated PA-oligosaccharide isomers as its positive-ion counterpart.