Slow positron beam study of corrosion-related defects in pure iron

Corrosion-related defects of pure iron were investigated by measuring Doppler broadening energy spectra (DBES) of positron annihilation and positron annihilation lifetime (PAL). Defect profiles of the S-parameter from DBES as a function of positron incident energy up to 30 keV (i.e. ∼1 μm depth) were analyzed. The DBES data show that S-parameter increases as a function of positron incident energy (mean depth) after corrosion, and the increase in the S-parameter is larger near the surface than in the bulk due to corrosion. Furthermore, information on defect size from PAL data as a function of positron incident energy up to 10 keV (i.e. ∼0.2 μm depth) was analyzed. In the two-state trapping model, the lifetime τ₂ = 500 ps is ascribed to annihilation of positrons in voids with a size of the order of nanometer. τ₁, which decreases with depth from the surface to the bulk, is ascribed to the annihilation of positrons in dislocations and three-dimensional vacancy clusters. The corroded samples show a significant increase in τ₁ and the intensity I₂, and near the surface the corroded iron introduces both voids and large-size three-dimensional vacancy clusters. The size of vacancy clusters decreases with depth.     

Short-step synthesis of tamoxifen and its derivatives via the three-component coupling reaction and migration of the double bond

The anti-tumor agent, tamoxifen, is easily synthesized by the successive allylation of benzaldehyde and the Friedel-Crafts alkylation reaction of anisole with the intermediary homoallyl silyl ethers, followed by the migration of the double bond to form the desired tetra-substituted ethylenes. Several derivatives of tamoxifen are also produced according to a similar synthetic strategy.     

Quantum Hall effect in back-gated InAs/GaSb heterostructures under a tilted magnetic field

We investigate the quantum Hall effect (QHE) in the InAs/GaSb hybridized electron–hole system grown on a conductive InAs substrate which act as a back-gate. In these samples, the electron density is constant and the hole density is controlled by the gate-voltage. Under a magnetic field perpendicular to the sample plane, the QHE appears along integer Landau-level (LL) filling factors of the net-carriers, where the net-carrier density is the difference between the electron and hole densities. In addition, longitudinal resistance maxima corresponding to the crossing of the extended states of the original electron and hole LLs make the QHE regions along integer-ν_net discontinuous. Under tilted magnetic fields, these R_xx maxima disappear in the high magnetic field region. The results show that the in-plane magnetic field component enhances the electron–hole hybridization and the formation of minigaps at LL crossings.     

Quantitative assessment of solid oxide electrochemical doping

Quantitative analysis of metal cation doping by solid oxide electrochemical doping (SOED) has been performed under galvanostatic doping conditions. A M–β″-Al₂O₃ (M=Ag, Na) microelectrode (contact radius: about 10 μm) was used as cation source to attain a homogeneous solid–solid contact between the β″-Al₂O₃ and doping target. In Ag doping into alkali borate glass, the measured dopant amount closely matched the theoretical value. High Faraday efficiencies of above 90% were obtained. This suggests that the dopant amount can be precisely controlled on a micromole scale by the electric charge during electrolysis. On the other hand, current efficiencies of Na doping into Bi₂Sr₂CaCu₂O_y (BSCCO) ceramics depended on the applied constant current. Efficiencies of above 80% were achieved at a constant current of 10 μA (1.6 A cm⁻²). The relatively low efficiencies were explained by the saturation of BSCCO grain boundaries with Na. By contrast, excess Na was detected on the anodic surface of ceramics at a constant current of 100 μA (16 A cm⁻²). In the present study, we demonstrate that SOED enables micromole-scale control over dopant amount.     

Simultaneous imaging of the structure and fluorescence of a supramolecular nanostructure formed by the coupling of π‐conjugated polymer chains in the intermolecular interaction

We fabricated a micrometer‐long supramolecular chain in which π‐conjugated polyrotaxane was coupled. A new experimental setup was designed and constructed, and the simultaneous direct imaging of the structure and fluorescent function was achieved. Furthermore, we identified the formation of a polymer intertwined network and observed novel fluorescence due to a long‐range interaction via this intertwined network over a distance of 5 μm or more without quenching over 15 min in the near field. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 801–809, 2006     

Tristimulus colorimetry using a digital still camera and its application to determination of iron and residual chlorine in water samples.

Tristimulus colorimetry using a digital still camera (DSC) as a colorimeter has been developed. A photograph of a sample and standard solutions was taken simultaneously with the DSC, and it was transferred to a PC. On the PC, the colors of the sample and of the standard solutions were analyzed and L* (brightness), a* (red-green component), and b* (yellow-blue component) values were determined with laboratory-made software. A dedicated light-box containing white-color LEDs as light source was made of white acrylic to make constant exposure at each photograph. Various settings of the DSC, such as exposure mode, white balance, and so on, that affect analytical figures, were studied with determination of iron with 1,10-phenanthroline. This method was successfully applied to the determinations of iron in a river water sample and of residual chlorine in tap water samples with N,N-diethylphenylenediamine (DPD).     

Determination of hexabromocyclododecane diastereoisomers and tetrabromobisphenol A in water and sediment by liquid chromatography/mass spectrometry.

A method to determine alpha-, beta- and gamma-hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) in water and sediments was presented using solid phase extraction (SPE) and/or solvent extraction. Recoveries from sediments were approximately 100% for all the chemicals, while recoveries of alpha-, beta- and gamma-HBCDs from water were dependent on the extraction method. In the case of dichloromethane (CH2Cl2) extraction, recoveries of alpha-, beta- and gamma-HBCD from landfill leachates were 77%, 88% and 92%, respectively. Technical difficulties in HBCD measurement are discussed in terms of the physico-chemical properties of HBCD isomers. The method was applied to landfill samples and marine sediment.