Dynamic moderation of an electric field using a SiO2 switching layer in TaOx ‐based ReRAM

ReRAMs using oxygen vacancy drift in their resistive switching are promising candidates as next generation memory devices. One remaining issue is degradation of the on/off ratio down to 10² or less with an increased number of switching cycles. Such degradation is caused by a local hard breakdown in a set process due to a very high electric field formed just before the completion of a conductive filament formation. We found that introducing an ultra‐thin SiO₂ layer prevents the hard breakdown by dynamical moderation of the electric field formed in the TaO_x matrix, resulting in repeated switching while retaining a higher on/off ratio of about 10⁵. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Bulk crystal growth of congruent MgO-doped LiNbO3 crystal with stoichiometric structure and its second-harmonic-generation properties

A new LiNbO₃ bulk crystal has been grown by doping with MgO (cs-MgO:LN; Li₂O:Nb₂O₅:MgO=45.30:50.00:4.70, (Li_0.906Mg_0.047V^Li_0.047)NbO₃), which successfully has the congruent point coinciding with the stoichiometric point. Its second-harmonic-generation (SHG) properties were evaluated. It was found that cs-MgO:LN has a much more homogeneous composition leading to uniform in-plane distribution of the non-critical phase-matching wavelength than the conventional LiNbO₃ crystals such as congruent LiNbO₃ (c-LN), stoichiometric LiNbO₃ (s-LN), and MgO-doped congruent LiNbO₃ (5MgO:LN). This homogeneity arose from the observation that none of the solute components including ionic species were segregated at the interface during growth. The SHG conversion efficiency of cs-MgO:LN is comparable to those of s-LN and 5MgO:LN.     

Iridium‐Catalyzed Coupling Reaction of Primary Alcohols with 2‐Alkynes Leading to Hydroacylation Products

A novel iridium‐catalyzed intermolecular coupling reaction of primary alcohols or aldehydes with 2‐alkynes was successfully achieved with high regioselectivity to give hydroacylation products such as α,β‐unsaturated ketones in good yields. The mechanistic investigation of the reaction strongly indicated that the coupling proceeds through the initial formation of homoallylic alcohols followed by dehydrogenation to β,γ‐unsatutated ketones and then isomerisation, which leads to the hydroacylation products.     

Control of dominant conduction orbitals by peripheral substituents in paddle-wheel diruthenium alkynyl molecular junctions

Control of charge carriers that transport through the molecular junctions is essential for thermoelectric materials. In general, the charge carrier depends on the dominant conduction orbitals and is dominantly determined by the terminal anchor groups. The present study discloses the synthesis, physical properties in solution, and single-molecule conductance of paddle-wheel diruthenium complexes 1R having diarylformamidinato supporting ligands (DArF: p-R-C₆H₄-NCHN-C₆H₄-R-p) and two axial thioanisylethynyl conducting anchor groups, revealing unique substituent effects with respect to the conduction orbitals. The complexes 1R with a few different aryl substituents (R = OMe, H, Cl, and CF₃) were fully characterized by spectroscopic and crystallographic analyses. The single-molecule conductance determined by the scanning tunneling microscope break junction (STM-BJ) technique was in the 10⁻⁵ to 10⁻⁴G₀ region, and the order of conductance was 1OMe > 1CF3 ≫ 1H ∼ 1Cl, which was not consistent with the Hammett substituent constants σ of R. Cyclic voltammetry revealed the narrow HOMO–LUMO gaps of 1R originating from the diruthenium motif, as further supported by the DFT study. The DFT-NEGF analysis of this unique result revealed that the dominant conductance routes changed from HOMO conductance (for 1OMe) to LUMO conductance (for 1CF3). The drastic change in the conductance properties originates from the intrinsic narrow HOMO–LUMO gaps.

Dominant conduction orbitals of paddle-wheel organodiruthenium complexes can be facilely controlled by the substituents embedded in the amidinato ligands.     

Research on the vesicle-micelle transition by 1H NMR relaxation measurement

We have investigated how the dynamics of surfactant molecules changes with the vesicle-micelle transition by (1)H NMR relaxation studies on the sodium decyl sulfate (SDeS)-decyltrimethylammonium bromide (DeTAB)-deuterium oxide system. The study has been planned with reference to the phase diagram of the SDeS-DeTAB-water system deduced from thermodynamic analysis of the surface tension data. The spin-lattice relaxation time (T(1)) and the spin-spin relaxation time (T(2)) are measured at 90 and 400 MHz at various total molalities, m, and compositions, X(2), of the surfactants. The data were analyzed according to the "two-step" model developed by Wennerstr?m et al. and molecular dynamics of the surfactant is discussed from the viewpoint of correlation time tau(f) associated with the local fast motion of the surfactant molecule, correlation time tau(s) associated with the slow overall motions of the aggregate and surfactant molecules within it, and local order parameter S. We find tau(s) of vesicles is an order of magnitude larger than that of micelles signifying that the tumbling of vesicle particles and surfactant diffusion over the vesicle are much slower than those for micelle. Tau(f) and S for vesicles are also larger than those for micelles. Molecular environments of the surfactant are also discussed from the dependence of the chemical shifts on m at constant X(2) or from that on X(2) at constant m. When the chemical shifts in vesicle and micelle are compared at constant m, the chemical shifts in vesicle are displaced to a lower magnetic field than those in micelle, which implies that the surfactant molecules are arranged more closely to each other in the vesicle than in the micelle.     

Stereoselective synthesis of a fragment of mycobacterial arabinan

Strategies for the stereoselective synthesis of mycobacterial arabinan were explored. Arabinofuranosyl donors with various protective groups were screened in terms of suitability for beta-(1,2-cis)-selective glycosylation. The protective group was found to affect the stereoselectivity of arabinofuranosylation. Beta-selectivity was drastically enhanced by using donors protected with 3,5-TIDPS, possibly due to conformational constraints on the furanose ring. Synthesis of heptaarabinofuranoside was then performed to demonstrate the practicality of this methodology. [reaction: see text].     

Photoelectrochemical oxidation of methanol on oxide nanosheets

Photoelectrochemical oxidation of alcohol on various nanosheet electrodes such as Nb6O17, Ca2Nb3O10, Ti(0.91)O2, Ti4O9, and MnO2 system host layers were measured to evaluate the photocatalysis of water photolysis with alcohol as a sacrificial agent. The nanosheet electrodes were prepared by the layer-by-layer (LBL) method, using electrostatic principles. The highest photooxidation current density was observed in methanol solution for Nb6O17 and Ca2Nb3O10 nanosheets, while the density was lower for Ti(0.91)O2, Ti4O9, and MnO2 nanosheets in decreasing order. The rank in the photocurrent density was in agreement with that in the photocatalytic activity, which means that the degree of photooxidation of the alcohol determines the activity of the alcohol in the water photolysis process. The photocurrent was independent of the number of nanosheet layers on the electrode, indicating that only the mono-nanosheet layer attached directly on a substrate acts as a photoelectrocatalyst and that the interlayer space is not important. Consequently, higher photooxidation current on the Nb6O17 mono-nanosheet layer means that the charge separation of electron and hole under illumination is very large and that the hole-capturing process by CH3OH is very quick compared with the surface recombination on the Nb6O17 nanosheet. The adsorption of a transition metal cation on the nanosheet acted as the surface recombination center, because the photocurrent decreased after the adsorption. The photocatalytic mechanism has been discussed in detail in terms of various photoelectrochemical behaviors.     

Designed ferromagnetic, ferroelectric Bi(2)NiMnO(6)

A newly designed ferromagnetic, ferroelectric compound, Bi(2)NiMnO(6), was prepared by high-pressure synthesis at 6 GPa. The crystal structure, as determined by synchrotron X-ray powder diffraction, is a heavily distorted double perovskite with Ni(2+) and Mn(4+) ions ordered in a rock-salt configuration. The presence of 6s(2) lone pairs of Bi(3+) ions and the covalent Bi-O bonds give ferroelectric properties with T(CE) of 485 K, while -Ni(2+)-O-Mn(4+)-O-Ni(2+)- magnetic paths lead to a ferromagnetism with T(CM) of 140 K. This simple material design to distribute two magnetic elements with and without e(g) electrons on B sites of Bi- and Pb-based perovkites can be applied to other Bi(2)M(2+)M'(4+)O(6) and Pb(2)M(3+)M'(5+)O(6) systems to search for newer ferromagnetic ferroelectrics.     

Reaction of pyrazine-2,3-dicarbonitrile and 1,3-dimethyllumazine with the phthalimidoalkyl radical

A phthalimidoalkyl radical reacts with pyrazine-2,3-dicarbonitrile ( 1 ) to give mono- and diphthalimido-alkylpyrazine-2,3-dicarbonitriles 4 and 5 . A similar reaction with 1,3-dimethyllumazine ( 2 ) gave only monophthalimidoalkyl-1,3-dimethyllumazines 6 or 7 . Hydrazine degradation of 7-(3′-phthalimido)propyl-1,3-dimethyllumazine ( 6c ) gave a 7-(3′-amino)propyl derivative 8 but 7-phthalimidomethyl-1,3-dimethyllumazine ( 6a ) gave only 1,3-dimethyllumazine ( 2 ). Thus the phthalimidomethyl group can be used as a protection group of the pteridine nucleus.     

Speciation of selenium in selenium-enriched shiitake mushroom, Lentinula edodes

The major selenium compound in an aqueous extract of the most popular mushroom in Eastern Asian countries, shiitake (Lentinula edodes), fortified with selenium (Se) was identified by means of hyphenated techniques, i.e. HPLC-inductively coupled argon plasma mass spectrometry and HPLC-electrospray ionization mass spectrometry (HPLC–ICP MS and HPLC–ESI MS). Sixty-eight per cent of the total Se in the selenized shiitake was extracted with water, and 49.8% of the Se in the water extract was eluted in the high molecular mass fraction (>40,000 kDa) before incubation at 37 °C. After incubation, 40.6% of the Se in the water extract was eluted in a lower molecular mass fraction and the Se eluted in the high molecular mass fraction had decreased to 14.0%, suggesting that the major selenium compound in the water extract was initially in a form bound to macromolecule(s) and was then enzymatically liberated from the macromolecule(s). The retention time of the liberated selenium compound in HPLC–ICP MS matched that of selenomethionine (SeMet), and the masses of molecular and fragment ions detected by HPLC–ESI MS also suggested that the selenium compound was SeMet. The selenized shiitake accumulated Se as SeMet, and SeMet might be bound to the water extractable high molecular mass protein(s).Electronic Supplementary Material Supplementary material is available for this article at