Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Site-directed 13C solid-state NMR studies on membrane proteins: strategy and goals toward revealing conformation and dynamics as illustrated for bacteriorhodopsin labeled with [1-13C]amino acid residues

We have so far demonstrated that well-resolved and site-specifically assigned (13)C peaks as recorded by site-directed NMR study on (13)C-labeled membrane proteins can serve as a convenient probe to reveal their local conformation and dynamics. We attempted here to clarify the extent to which (13)C NMR spectra of (13)C-labeled fully hydrated bacteriorhodopsin (bR) as a typical membrane protein are visible or well resolved in the presence of inherent fluctuation motions with frequency of 10(2)-10(8) Hz, especially at the membrane surfaces. Accordingly, we estimated the relative proportion of (13)C NMR signals from the surface areas with and without peak suppression by the accelerated transverse relaxation effect by surface-bound Mn(2+) ions, which could be effective for residues within 8.7 angstroms of the membrane surface. It turned out that the experimental findings are consistent with the predicted amount of amino acid residues under consideration located within 8.7 angstroms of the surface for [1-(13)C]Val- and Ile-labeled bR and also [3-(13)C]Ala-bR. In contrast, (13)C NMR peaks from such surfaces area are almost completely or partially suppressed for [1-(13)C]Gly-, Ala-, Leu-, Phe- and Trp-labeled bR, as a result of plausible interference of the fluctuation frequency with frequency of magic angle spinning (10(4) Hz). We further assigned several (13)C NMR signals of [1-(13)C] Val-, Trp- and Ile-labeled bR on the basis of a variety of site-directed mutants with reference to those of the wild type. Further, we recorded the (13)C NMR of bR in lipid bilayers to search for the optimal conditions to be able to obtain signals with the highest peak intensities and spectral resolution. Backbone dynamics turn out to be essential for recording (13)C NMR spectra so as to escape from motional frequencies of the order of 10(4)-10(5) Hz, either in the direction of accelerated fluctuation or slowed motions in the direction of forming the 2D array.     

Lewis acid-activated chiral leaving group: enantioselective electrophilic addition to prochiral olefins

A new strategy using a BINOL derivative as a chiral leaving group and Lewis acid has been developed for enantioselective alkylation of prochiral olefins. (R)-2,2'-Bis[2-(trimethylsilyl)ethoxymethyl]-1,1'-binaphthol is demonstrated to be an effective reagent for enantioselective hydroxymethylation of silyl enol ethers and trisubstituted alkenes. Electrophilic addition to prochiral olefins is accompanied by cleavage of an acetal that is dual activated by SnCl4 and the delta-effect of silicon through the S(N)2 substitution process. Enantioselective synthesis of cyclic terpenes is also described using this strategy.     

Structural analysis of amylose tris(3,5-dimethylphenylcarbamate) by NMR relevant to its chiral recognition mechanism in HPLC

The structural analysis of amylose tris(3,5-dimethylphenylcarbamate) (ADMPC) was performed by NMR spectroscopy using a sample with a lower degree of polymerization in order to understand the chiral recognition mechanism when it was used as a chiral stationary phase (CSP) in high-performance liquid chromatography (HPLC). ADMPC exhibited chiral discrimination for many enantiomers, including 1-(9-anthryl)-2,2,2-trifluoroethanol (1) and 1,1'-bi-2-naphthol (2) in both NMR and HPLC. A good agreement was observed between the HPLC and NMR results when chloroform was employed as the common solvent. The structure of ADMPC in solution was investigated by NMR using the 2D NOESY technique coupled with computer modeling, and a left-handed 4/3 helical structure was obtained as the most probable one. The binding geometry between ADMPC and the enantiomers of 1 was also investigated by (1)H NMR titration. On the basis of these results combined with molecular modeling, a rational model to explain the chiral discrimination mechanism of 1 on ADMPC was proposed.     

Regional distribution of manganese,iron, copper,and zinc in the rat brain during development

Manganese (Mn), iron (Fe), copper (Cu), and zinc (Zn) concentrations were determined in the brain regions of normal 1-, 3-, 5-, 7-, 14-, 21-, 42-, 77-, and 147-day-old Wistar rats using inductively coupled plasma mass spectrometry (ICP-MS), and their maps were illustrated in color to visually compare the distribution of the elements at various stages of the growth process. Sagittal slices (1-mm thickness) sectioned at the level of the substantia nigra were divided into 18 regions, and the small slice samples were digested in microwave-assisted closed vessels for ICP-MS measurement. Mn, Fe, Cu, and Zn concentrations increased region-specifically with age, and their distributional maps showed some characteristics. These findings are discussed in terms of needs for these trace elements in the normal brain. Among new findings about their brain distribution, it is especially noteworthy that higher concentrations of Mn, Fe, and Zn were observed in the substantia nigra compared with those in neighboring regions. The mapping method in this work is expected to open up possibilities for screening of the in vivo element–element interrelationships among these essential elements.     

An approach to analysis of pigment release from microcapsules with size distribution

We have studied the release curve for microcapsules with size distribution. On the basis of an analogy to the relaxation phenomena with multiple characteristic times, we propose a stretched exponential release curve for the system with size distribution and relate the release curve to the size distribution function of the microcapsule. This method was successfully applied to the transfer of azo-pigments from inner medium of dioctyl phthalate to dispersing medium of methanol through poly(ureaurethane) microcapsule membrane.     

Stereocontrolled approaches to 9(0)-methanoprostacyclin

A stable PGI₂ analog (methanoprostacyclin $\text{2}$) was synthesized starting from 5-norbornene-2,3-dicarboxylic anhydride.     

Effects of various triamines on cell-free polypeptide synthesis of Escherichia coli and on growth of its polyamine auxotrophs

The effects of various synthetic triamines having a general structure, H2N(CH2)xNH(CH2)yNH2, where x = 2-5 and y = 2-8 (abbreviated, x-y; with 3-4 being spermidine itself), on poly(U)-directed polypeptide synthesis of Escherichia coli and on growth of its polyamine-requiring mutants were examined in comparison with those of spermidine. Except for 2-2 and 2-3, all of the triamines stimulated more or less polypeptide synthesis at suboptimal Mg2+ concentrations, but the Mg2+ concentration required for the maximal stimulatory effect was different for each triamine. The degree of maximal stimulation caused by 3-3 (norspermidine), 4-4 (homospermidine), or 4-5 was nearly comparable with that by spermidine. The acetylspermidines were inactive, however, they inhibited the spermidine-stimulated polyphenylalanine synthesis. Many of the triamines examined reduced the ratio of leucine to phenylalanine incorporation into polypeptides during poly(U)-directed translation, and the degree of this effect did not necessarily correspond with that of the stimulatory effect. Moreover, 2-4, 2-5, 3-3 and 4-4 could stimulate the growth of a polyamine auxotroph of E. coli, MA 261, as effectively as did spermidine. However, 3-3 was the only triamine which could fully replaced spermidine in promoting growth of a mutant strain, KK 101, which is more dependent on polyamines than MA 261. Thus, these results demonstrated that some synthetic triamines were as active as spermidine in eliciting these effects, and also that there were some differences among these effects in the structural requirement for triamine.     

Synthesis of new colloidal formations during the strengthening of different activated hydrated metallurgical slags

This paper reports on a comparison of experimental researches on the hydration hardening of different types of dumped ferrous slag (DFS) (blast furnace, open hearth, electric steel and converter), non-activated and activated with small (2%) additions of Portland cement or lime. Activation was found to accelerate the strengthening processes in the early stages of hydration resulting from the growth of colloidal sol–gel new formations in a more alkaline environment. Over time, these formations became denser and transformed into stone-like amorphous materials with a uniaxial strength of up to 47.6 MPa at 1 year of age. All these types of slag can, therefore, be used in different applications, for example, like traditional binders, such as Portland cement, to different ceramic goods, new construction materials, etc. But till now the results of this research were used only for the preparing of binder materials for natural soils strengthening as road bases in Russia. Highways whose roadbeds were built with these DFS as binder materials have shown excellent performance indices in different parts of Russia, including Siberia and northern regions.