Site-controlled application of electric potential on a conducting polymer "canvas"

A novel patterning method for conducting polymer films was successfully demonstrated using the concept of bipolar electrochemistry. The local application of an anodic potential to poly(3-methylthiophene) (PMT) and poly(3,4-ethylenedioxythiophene) (PEDOT) on a bipolar electrode (BPE) realized local electrochemical doping and reaction depending on the supporting salt used. The potential applied on the BPE was measured and corresponded well to the patterns. The array-type driving electrode system was able to draw complex patterns in a site-controlled manner.     

A portable total reflection X-ray fluorescence spectrometer with a diamond-like carbon coated X-ray reflector

A diamond-like carbon (DLC) coated quartz glass sample holder is used in a portable total reflection X-ray fluorescence (TXRF) spectrometer. A spot area of a water sample on the DLC sample holder becomes smaller than that on a quartz glass sample holder usually used in TXRF analysis because DLC is more hydrophobic. Therefore, the use of the DLC sample holder enhances fluorescent X-rays reaching a detector compared with the use of a quartz glass sample holder, leading to improvement in detection sensitivity. A detection limit of 28 pg is achieved for Cr in a river water sample when using the DLC sample holder.     

Neutron electric dipole moment measurement with a buffer gas comagnetometer

A neutron EDM measurement with a comagnetometer is discussed. For magnetometry, polarized xenon atoms are injected into a cylindrical cell where a cylindrically symmetric magnetic field and an electric field are applied for the EDM measurement. The geometric phase effect (GPE), which originates from particle motion in a magnetic field gradient, is analyzed in terms of the Dyson series. The motion of the xenon atom is largely suppressed because of a small mean free path. The field gradient is controlled by means of NMR measurements, where the false effect of Earth?s rotation is removed. As a result, the GPE is reduced below 10⁻²⁸e cm${10}^{-28}e\text{cm}$.     

Spallation ultracold neutron source of superfluid helium below 1 K

For the production of high-density ultracold neutrons (UCNs), we placed 0.8 K superfluid helium in a cold neutron moderator. We resolved previous heat-load problems in the spallation neutron source that were particularly serious below 1 K. With a proton-beam power of 400 MeV×1 μA, a UCN production rate of 4 UCN cm(-3) s(-1) at the maximum UCN energy of E(c)=210 neV and a storage lifetime of 81 s were obtained. A cryogenic test showed that the production rate can be increased by a factor of 10 with the same storage lifetime by increasing the proton-beam power as well as (3)He pumping speed.     

Fluorescence imaging of potassium ions in living cells using a fluorescent probe based on a thrombin binding aptamer-peptide conjugate

When a biotinylated FRET probe based on a peptide-thrombin binding aptamer conjugate was introduced together with streptavidin and biotinylated nuclear export signal peptide into HeLa cells, the resulting ternary complex enabled visualization of K(+) concentration changes in the cell.     

Oxidative Polymerization of Silylthioketene Dimer

Summary: The first π‐conjugated poly(thioketene dimer) was synthesized via the homopolymerization of a silylthioketene dimer by a chemical oxidation‐reduction process. The polymerization of trimethylsilylthioketene dimer in the presence of FeCl₃ (in CHCl₃ at 70 °C for 24 h) gave the corresponding doped poly(thioketene dimer). After treatment of the doped polymer with an aqueous solution of ammonia, the neutral poly(thioketene dimer) was obtained with an incidental desilylation. The polymer obtained was soluble in DMF and DMSO. From gel permeation chromatographic analysis (DMF, polystyrene standards), the number‐average molecular weight of the polymer was found to be 7 460. The polymer showed low oxidation potentials derived from the thioketene dimer unit. An effective extension of the π‐conjugation was observed in the polymer.

Synthesis of π‐conjugated poly(thioketene dimer).     

Rational Design of [13C,D14]Tert‐butylbenzene as a Scaffold Structure for Designing Long‐lived Hyperpolarized 13C Probes

Dynamic nuclear polarization (DNP) is a technique to polarize the nuclear spin population. As a result of the hyperpolarization, the NMR sensitivity of the nuclei in molecules can be dramatically enhanced. Recent application of the hyperpolarization technique has led to advances in biochemical and molecular studies. A major problem is the short lifetime of the polarized nuclear spin state. Generally, in solution, the polarized nuclear spin state decays to a thermal spin equilibrium, resulting in loss of the enhanced NMR signal. This decay is correlated directly with the spin‐lattice relaxation time T₁. Here we report [¹³C,D₁₄]tert‐butylbenzene as a new scaffold structure for designing hyperpolarized ¹³C probes. Thanks to the minimized spin‐lattice relaxation (T₁) pathways, its water‐soluble derivative showed a remarkably long ¹³C T₁ value and long retention of the hyperpolarized spin state.     

Microscopic structures of adsorbed cationic porphyrins on clay surfaces: molecular alignment in artificial light-harvesting systems

The intercalation behavior of cationic porphyrin derivatives within the interlayer spaces of nano-layered clay minerals has been investigated. The porphyrins were successfully intercalated by the newly adopted method of repeated freeze-thaw cycles. The absorption spectra of the porphyrins were compared in the solution phase, adsorbed onto the exfoliated clay nano-sheets, intercalated within the interlayer spaces of clay sheets dispersed in water and intercalated in dry films. Substantial red shifts of the λ_max values in the absorption spectra of the porphyrins were observed on the exfoliated clay sheets, and further red shifts were induced within the interlayer space. The dry films of the intercalated samples exhibited the largest red shifts. X-ray diffraction studies revealed that the clearance space between the layers in these intercalated hybrid compounds is only large enough for the porphyrins to be rigidly packed parallel to the clay layer. For the exfoliated clay nano-sheets, theoretical calculations were carried out on the correlation between the dihedral angle of the meso-substituted pyridiniumyl plane vs. the porphyrin ring and the λ_max of the porphyrin Soret band. An extrapolation of the experimental λ_max value to the correlation curve, afforded the dihedral angle to be 61.6°. The microscopic structure of the adsorbed state of the cationic porphyrins on the exfoliated clay nano-sheets was, thus, proposed to involve an orientation parallel to the clay surface, with a distance of 0.15 nm from the surface, which implies the expulsion of the solvent water molecules.     

Preparation of 6-O-(4-alkoxytrityl)celluloses and their properties

Cellulose was reacted with a series of 4-alkoxytrityl chlorides (C(n)TCl, n: number of carbon atoms in a saturated alkyl chain) under homogeneous reaction conditions in LiCl-N,N-dimethyl acetoamide to give a series of 6-O-(4-alkoxytrityl)celluloses (C(n)TC) with a high degree of substitution (DS), from 0.94 to 0.99, and with high regioselectivity at the 6-O position. Solubility of the C(n)TC in nonpolar solvents depended on the alkyl chain length: as the alkyl chain lengthens, cellulose derivatives become more hydrophobic and are readily soluble in nonpolar solvents, but not in polar solvents. Acetates of the C(4)-C(18)TC (C(4)-C(18)TCAc) showed anisotropic structures over melting temperatures (T(m)) examined under a polarized optical microscope (POM). Over isotropization temperatures (T(i)), flow birefringence were detected for C(12)-C(18)TCAc. The T(m) and T(i) decreased linearly with an increasing number of carbon atoms in the alkyl substituent. Wide-angle X-ray scattering (WAXS) studies of C(n)TC indicated that the fully extended side chains were perpendicular to the polymer backbone and interdigitated. These C(n)TC with the improved solubility may be used as starting materials for further derivatization focused on the secondary hydroxyl groups at the C-2 and C-3 positions.