In situ measurement of crystallization of oxide thin films during irradiation with pulsed UV laser in chemical solution deposition process

The epitaxial and polycrystalline growth of lanthanum strontium manganite films on single crystalline strontium titanate and lanthanum aluminate substrates, respectively, under the irradiation with XeCl lasers in the excimer laser-assisted metal organic deposition (ELAMOD) process have been previously reported. In order to investigate the growth phenomena, we monitored the thermal radiation from the sample surfaces irradiated with a pulsed ultraviolet laser in situ with near-infrared sensors. The cooling of the lanthanum strontium manganite films on strontium titanate substrates was significantly slower than that of films on lanthanum aluminate substrates. A similar behavior was also observed by the numerical simulation study. This difference in the cooling decay curves may play an important role in the mode by which crystal growth occurs in the ELAMOD process.     

Synthesis of acetic acid from methanol alone by homogeneous metal complex catalyst. Part 4. In-situ formation of catalyst species and halogen effect in the RuCl3·3H2O–SnX2 (X=F, Cl, Br, I) composite system

Highly selective formation of methyl acetate has been found possible from methanol alone using the catalyst generated in situ from RuCl₃·3H₂O and SnCl₂ as well as SnX₂ (X=F, Br, I). The reaction did not occur in the absence of SnCl₂ added and the optimum [Sn]/[Ru] ratio appeared at about 16. The halogen effect showed the order of SnF₂>SnCl₂>SnBr₂>SnI₂, which indicates the importance of cationic character of Ru(II) center to facilitate its electrophilic interaction with β-hydrogen of Ru–OCH₃ intermediate in the rate-limiting dehydrogenation step.     

Visual Acuity Depends on Perceived Size

Increasing (or decreasing) the convergence angle can shrink (or expand) the perceived size of an object without changing its retinal size. The present report deals with the question of whether such a change in perceived size affects visual acuity. We investigated the effects of perceived size on the legibility of letters, using a telestereoscope which can control the observer’s convergence angle while keeping the size of the retinal image constant. We demonstrated that letters do become more legible (illegible) as perceived size expands (shrinks), although their retinal size stays constant. Then, we measured the ‘threshold’ size of the convergence angle, at which letters became legible from illegible, for several retinal sizes (0.1 to 0.2 deg) of letters. The result shows that the threshold decreases as the retinal size of letters decreases, so that the minimum retinal size of legible letters depends on the convergence angle. This implicates contributions from the size perception at higher levels of the visual system to the determination of visual acuity.     

Dependence of tracking error characteristics on objective lens shift for in-line-type differential push-pull methods using segmented gratings

In this paper, we present the validity of in-line-type differential push-pull methods using segmented gratings with respect to the radial shift of an objective lens by numerical calculation for the first time. In these differential push-pull methods, the segmented gratings for generating sub spots are divided into two to four regions each with a specific phase value and a width. Tracking error signals are calculated with respect to the objective lens shift under parameter conditions of the widths of the segmented regions. The obtained results show that the grating of the simpler configuration with two regions reveals good compatibility between DVD-R and DVD-RAM compared with those with three or four regions     

Electronic Spectra of N-(P-Methoxybenzylidene)-P-N-Butylaniline (MBBA)

The ultraviolet absorption spectra of MBBA in the metastable and stable solids, the nematic, and the isotropic liquid states have been measured. Furthermore the spectra of dilute solutions and the linear dichroism spectra of nematic single liquid crystal in a homogeneous orientation have also been observed.     

Facile Synthesis of Free‐Standing Polymer Brush Films Based on a Colorless Polydopamine Thin Layer

A free‐standing polymer brush film with tailored thicknesses based on a colorless polydopamine (PDA) thin layer is prepared and characterized. The surface‐initiated atom transfer radical polymerization (ATRP) of 2‐hydroxyethyl methacrylate (HEMA) is performed on a PDA layer with thickness of ca. 6 nm, which generated an optically transparent and colorless free‐standing PHEMA brush film (1.5 cm × 1.5 cm). Because the cross‐linked PDA layer is used as the base for the polymer brushes, the reported method does not require cross‐linking the polymer brushes. The free‐standing film thicknesses of ≈16–75 nm are controlled by simply changing the ATRP reaction time. The results show that the free‐standing PHEMA brush film transferred onto a plate exhibits a relatively smooth surface and is stable in any solvent.

     

Determination of structures of cobalt(II)-chloro complexes in hydrochloric acid solutions by X-ray absorption spectroscopy at 298 K

The anion exchange reaction is fundamental to the adsorption and desorption of a specific species from a solution phase to an extracting phase, and it is widely used for separation and waste fluid treatment in industrial fields. However, the details of the anion exchange reaction are poorly understood. Quantitative thermodynamic analysis needs a precise solution condition before and after the exchange reaction. Identification of species adsorbed on the anion exchanger is also necessary because there are multiple species in the solution phase in general. Cobalt is a base metal that is widely used in modern society. One of the authors determined the distribution of cobalt-chloro complexes in hydrochloric acid solutions. It is necessary to know what species are adsorbed on anion exchangers for the thermodynamic analysis of the anion exchange reaction. The comparison in structures between the species in the solution phase and adsorbed on anion exchangers reveals what species are adsorbed. Therefore, the determination of the structures of cobalt-chloro complexes in the solution phase is the next step for quantitative analysis. X-ray absorption spectroscopy (XAS) was used for the structure analysis. Factor analysis can decompose extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) spectra consisting of multiple species into individual spectra of single species using the distribution determined using UV-Vis absorption spectra. Fitting EXAFS theoretical models to the decomposed individual spectra determined the structures of three cobalt-chloro complexes: an octahedron of [Co^II(H₂O)₆]²⁺, a distorted octahedron of [Co^II(H₂O)₅Cl]⁺, and a tetrahedron of [Co^IICl₄]^2?. The XANES spectra showed us that the Cl ligand in [Co^II(H₂O)₅Cl]⁺ was attracted to the center atom of Co^II by an electrostatic force, and the bonding system between Cl ligands and Co^II in [Co^IICl₄]^2? involved covalency.