Visible light-responsive cell scaffolds with bilayer structures for single cell separation

Collagen is a major component of the extracellular matrix, and collagen gels have been used as cell scaffolds. We previously prepared gold nanoparticle (AuNP)-embedded collagen gels (AuCol) to serve as cell scaffolds that were sensitive to visible light. We performed single cell detachment from this cell scaffold using a microscope equipped with a laser irradiation system. In the present study, we adjusted hydrogel thickness and AuNP concentration in AuCol, with a goal of improving cell detachment efficiency. Thin hydrogels became blackened after the laser irradiation, and thick hydrogels with high AuNP concentrations were not permeable to the laser light. We, therefore, prepared bilayer gels, composed of AuCol as the upper layer and intact collagen gel (Col) as the bottom layer. These bilayer gels allowed more effective cell detachment, because they were thick and optically transparent. Our results indicated that an AuCol/Col ratio of 2 enabled the highest cell detachment efficiency. Essentially, no cell damage was observed in our system, suggesting that this is a cell-friendly single cell separation system.     

Reactions of Selenobenzophenones with Olefins

Reactions of selenobenzophenones with methyl propiolate afforded two types of cycloadducts regioselectively. The reaction with tetracyanoethylene gave selenophene derivatives. Mechanisms of these reactions were discussed.     

Preparation of dibromopyridines having -(CH2)m-SO3Na groups as monomers for new polypyridines

Dibromopyridines or dibromopyridone with -(CH₂)_m-SO₃Na group(s) has been prepared via the reactions of the corresponding dibromopyridines with -OH and -NH₂ groups with sultone. These compounds were converted into polymers with the -(CH₂)_m-SO₃H groups via organometallic polycondensation. The polymer showed proton conducting properties and high stability toward oxidation.     

Effect of Amines on the Selective Bromination of Some β-Substituted-2-Butenoic Esters

The effect of amines on the selective bromination of some β-substituted-2-butenoic esters is described. The bromination of methyl (Z)-4-t-butyldiphenylsilyloxy-3-methylbutenoate 2 in the presence of DIPEA (N, N-diisopropylethylamine) and the successive treatment of the obtained dibromide with potassium t-butoxide afford the desired Z bromide selectively. But the corresponding E bromide forms exclusively when 2, 6-di-t-butyl-4-methylpyridine is used in the bromination.     

Novel Chiral Bisformamide-Promoted Asymmetric Allylation of Benzaldehyde with Allyltrichlorosilane

Novel chiral bisformamides have been prepared from (R,R)-1,2-cyclohexanediamine and utilized as Lewis bases in the asymmetric allylation of benzaldehyde with allyltrichlorosilane. The reaction in the presence of Lewis base 1i gave an 83:17 enantiomeric ratio (R/S) of the products in 90% isolated yield.      

DNA aggregation and cleavage in CGE induced by high electric field in aqueous solution accompanying electrokinetic sample injection

The phenomenon of peak area decrease due to high injection voltage (V_inj, e.g. 10–30 kV, 200–600 V/cm in the 50 cm capillary) was found in the analysis of very dilute DNA fragments (<0.2 mg/L) by using high‐sensitive electrokinetic supercharging‐CGE. The possibility of DNA cleavage in aqueous solution was suggested, in addition to the aggregation phenomenon that is already known. The analysis of intentionally voltage‐affected fragments (at 200 V/cm) also showed decreased peak areas depending on the time of the voltage being applied. Computer simulation suggested that a high electric field (a few kV/cm or more) could be generated partly between the electrode and the capillary end during electrokinetic injection (EKI) process. After thorough experimental verification, it was found that the factors affecting the damage during EKI were the magnitude of electric field, the distance between tips of electrode and capillary (D_e/c), sample concentration and traveling time during EKI in sample vials. Furthermore, these factors are correlating with each other. A low conductivity of diluted sample would cause a high electric field (over a few hundred volts per centimeter), while the longer D_e/c results in a longer traveling time during EKI, which may cause a larger degree of damage (aggregation and cleavage) on the DNA fragments. As an important practical implication of this study, when the dilute DNA fragments (sub mg/L) are to be analyzed by CGE using EKI, injection voltage should be kept as low as possible.     

Complete Photochromic Structural Changes in Ruthenium(II)?Diimine Complexes,Based on Control of the Excited States by Metalation

The thermal and photochemical reactions of a newly synthesized complex, [Ru^II(TPA)(tpphz)]²⁺ ( 1 ; TPA=tris(2‐pyridylmethyl)amine, tpphz=tetrapyrido[3,2‐a:2′,3′‐c:3′′,2′′‐h: 2′′′,3′′′‐j]phenazine), and its derivatives have been investigated. Heating a solution of complex 1 (closed form) and its derivatives in MeCN caused the partial dissociation of one pyridylmethyl moiety of the TPA ligand and the resulting vacant site on the Ru^II center was occupied by a molecule of MeCN from the solvent to give a dissociated complex, [Ru^II(η³‐TPA)(tpphz)(MeCN)]²⁺ ( 1′ , open form), and its derivatives, respectively, in quantitative yields. The thermal dissociation reactions were investigated on the basis of kinetics analysis, which indicated that the reactions proceeded through a seven‐coordinate transition state. Although the backwards reaction was induced by photoirradiation of the MLCT absorption bands, the photoreaction of complex 1′ reached a photostationary state between complexes 1 and 1′ and, hence, the recovery of complex 1 from complex 1′ was 67 %. Upon protonation of complex 1 at the vacant site of the tpphz ligand, the efficiency of the photoinduced recovery of complex 1 +H⁺ from complex 1′ +H⁺ improved to 83 %. In contrast, dinuclear μ‐tpphz complexes 2 and 3 , which contained the Ru^II(TPA)(tpphz) unit and either a Ru^II(bpy)₂ or Pd^IICl₂ moiety on the other coordination edge of the tpphz ligand, exhibited 100 % photoconversion from their open forms into their closed forms ( 2′ → 2 and 3′ → 3 ). These results are the first examples of the complete photochromic structural change of a transition‐metal complex, as represented by complete interconversion between its open and closed forms. Scrutinization by performing optical and electrochemical measurements allowed us to propose a rationale for how metal coordination at the vacant site of the tpphz ligand improves the efficiency of photoconversion from the open form into the closed form. It is essential to lower the energy level of the triplet metal‐to‐ligand charge‐transfer excited state (³MLCT*) of the closed form relative to that of the triplet metal‐centered excited state (³MC*) by metal coordination. This energy‐level manipulation hinders the transition from the ³MLCT* state into the ³MC* state in the closed form to block the partial photodissociation of the TPA ligand.     

Hardness and slip systems of orthorhombic hen egg-white lysozyme crystals

Hardness and slip systems by an indentation method were investigated on different habit planes of orthorhombic hen egg-white lysozyme (O-HEWL) crystals containing water. A dependence of the hardness on the water-evaporation time exhibits three stages as incubation, transition and saturated ones, as tetragonal (T)-HEWL crystals reported previously. The hardness values of (1 1 0), (0 1 0) and (0 1 1) habit planes of O-HEWL in the incubation stage or wet condition exhibits 6, 8 and 10 MPa, respectively. The hardness depends on indented planes but it is independent of the air-humidity and crystal volumes. These values correspond to the intrinsic hardness for O-HEWL crystals containing water. In the incubation stage, the slip traces are clearly observed around the indentation mark and the corresponding six kinds of slip systems are identified to be {0 1 1}<1 0 0>, {1 1 0}<1 1 0>, {0 1 1}<0 1 1>, {1 1 0}<0 0 1>, {1 0 0}<0 0 1> and {0 1 0}<0 0 1>.     

Identification of Site-Specific Degradation in Bacterially Expressed Human Fibroblast Growth Factor 4 and Generation of an Aminoterminally Truncated,Stable Form

Fibroblast growth factor 4 (FGF4) is considered as a crucial gene for tumorigenesis in humans and the development of mammalian embryos. The secreted, mature form of human FGF4 is thought to be comprised of 175 amino acid residues (proline³² to leucine²⁰⁶, Pro³²-Leu²⁰⁶). Here, we found that bacterially expressed, 6× histidine (His)-tagged human FGF4 (Pro³²-Leu²⁰⁶) protein, referred to as HishFGF4, was unstable such as in phosphate-buffered saline. In these conditions, site-specific cleavage, including between Ser⁵⁴ and Leu⁵⁵, in HishFGF4 was identified. In order to generate stable human FGF4 derivatives, a 6× His-tagged human FGF4 (Leu⁵⁵-Leu²⁰⁶), termed HishFGF4L, was expressed in Escherichia coli. HishFGF4L could be purified from the supernatant of cell lysates by heparin column chromatography. In phosphate-buffered saline, HishFGF4L was considered as sufficiently stable. HishFGF4L exerted significant mitogenic activities in mouse embryonic fibroblast Balb/c 3T3 cells. In the presence of PD173074, an FGF receptor inhibitor, the growth-stimulating activity of HishFGF4L disappeared. Taken together, we suggest that HishFGF4L is capable of promoting cell growth via an authentic FGF signaling pathway. Our study provides a simple method for the production of a bioactive human FGF4 derivative in E. coli.