Preparation of dehydrated powder of hemoglobin vesicles

The carbonyl hemoglobin (CO-Hb), which was used to prevent denaturation (metHb) during the preparation of samples, was encapsulated into lipid vesicles constituted from unsaturated phospholipid, cholesterol and unsaturated fatty acid. Unsaturated components were polymerized by γ-irradiation to enhance the stability of bilayer membrane. An aqueous dispersion of resulting Hb vesicles was freeze-dried in the presence of saccharides (50–200 mM) to obtain a dehydrated powder of Hb vesicles. Change in the vesicle size, the leakage of encapsulated Hb and the oxidation of Hb to metHb were not observed. Therefore, the long-term storage of Hb vesicles can be realized as a dry powder.     

Determination of 4-alkylphenols by novel derivatization and gas chromatography-mass spectrometry

A simple and sensitive method for the determination of alkylphenols in water samples has been developed using gas chromatography-mass spectrometry. Alkylphenols were determined after the extractive derivatization with pentafluoropyridine. The derivatization of alkylphenols efficiently proceeded to give the corresponding 4-tetrafluoropyridyl derivatives under the biphasic reaction system. The derivatization conditions including the phase-transfer catalyst, the amount of pentafluoropyridine, the reaction time, the concentration of NaOH and organic solvent were optimized. On the mass spectra of these derivatives, intense specific ion peaks were observed: m/z 256 for 4-n-alkylphenols and m/z 284 for 4-tert.-alkylphenols. Calibration curves were linear in the range of 20-1000 ng/l (200-10,000 ng/l for nonylphenol), and the detection limits varied between 6.93 and 15.7 ng/l (85.2 ng/l for nonylphenol). The average recoveries of the alkylphenols in a fortified river water sample (100 ng/l except for nonylphenol: 1000 ng/l) ranged from 91.1 to 112%. The relative standard deviations were found to be between 5.6 and 16%. This method was successfully applied to the determination of alkylphenols in river water.     

Catalytic specificity exhibited by p-sulfonatocalix[n]arenes in the methanolysis of N-acetyl-l-amino acids

Specific acid catalysis of p-sulfonatocalix[n]arenes (n = 4, Calix-S4; n = 6, Calix-S6; n = 8, Calix-S8) was observed in the alcoholysis of N-acetyl-l-amino acids in methanol. The methanolysis rates of basic amino acid substrates (His, Lys, and Arg) were markedly enhanced in the presence of Calix-Sn, as compared with rates observed with p-hydroxybenzenesulfonic acid (pHBS), which is a noncyclic analogue of Calix-Sn. This catalytic effect of Calix-Sn was not observed for the methanolysis of Phe, Tyr, and Trp substrates. On the other hand, (1)H NMR experiments following the effect of Calix-Sn on N-acetyl-l-amino acid substrates in CD(3)OD showed that the spectrum of a mixture of the His substrate with Calix-Sn was significantly different from the combined spectra of the respective compounds. These changes in spectra support the formation of an inclusion complex of Calix-Sn with basic amino acids. Furthermore, it was obvious that methanolysis of the His substrate catalyzed by Calix-S4 and Calix-S6 obeyed Michaelis-Menten kinetics. These results indicate that the catalytic activity of Calix-Sn originates from its forming a complex with specific substrates (basic amino acids), similar to enzymatic reactions.     

Reactivities of Stable Rotamers: XLIV. Ring-Opening Reactions of 1-(9-Fluorenyl)-2-(2-methyl-2-oxiranyl)naphthalene Rotamers With Acids and the Structure of Oxiranes

X-ray crystallography of the ap-form of the 1-(9-fluorenyl)-2-(2-methyl-2-oxiranyl)naphthalene has revealed that the carbon atom of the oxirane which is connected to the naphthyl group in this compound is almost planar. The specific structural features of the epoxy ring in this compound are caused by sterical effects and by the presence of a -system in the immediate vicinity of the oxirane ring. Certain differences have been found also in reactivity of rotational isomers of 2-X-substituted 1-[1-(9-fluorenyl)-2-naphthyl]ethyl cations (X = O, S, Se). At X = O arose more deprotonation product from the -position of the oxygen than in reactions of sulfur and selenium-containing analogs. Reactions of epoxides with zinc chloride almost exclusively gave the corresponding aldehydes.     

A GaCl3-catalyzed [4+1] cycloaddition of alpha,beta-unsaturated carbonyl compounds and isocyanides leading to unsaturated gamma-lactone derivatives

A GaCl3-catalyzed reaction of alpha,beta-unsaturated ketones with isocyanides leading to the formation of unsaturated lactone derivatives is described. This is the first example of the catalytic [4+1] cycloaddition of alpha,beta-unsaturated ketones and isocyanides. GaCl3 is an excellent catalyst due to its lower oxophilicity, which is desirable for all of the key steps, such as E/Z isomerization, cyclization, and deattachment from the products.     

Preparation of polymers with substituted allyl end group using dimer of α-methylvinyl monomer as addition fragmentation chain transfer agent at high temperatures

The dimerization of methyl methacrylate, ethyl methacrylate, methacrylonitrile, and α-methylstyrene to 2-substituted-1-allylic compounds [CH₂?C(X)CH₂C(CH₃)₂X] (X = COOR, C₆H₅, or CN), and methyl α-ethylacrylate to a 3-substituted-2-allylic compound [CH₃CH?C(COOCH₃)CH₂C(CH₃)(C₂H₅) COOCH₃] was carried out by catalytic chain transfer using benzylbis (dimethylglyoximato) (pyridine) cobalt (III). These dimers were then used as addition-fragmentation chain transfer agents in the polymerizations of methyl methacrylate and styrene at 80⁰C or above. Cross-dimers from methacrylic ester-α-methylstyrene and methacrylonitrile-α-methylstyrene mixtures were similarly prepared. Except for those from methyl α-ethylacrylate and methacrylonitrile, all the dimers participated in the addition-fragmentation and the copolymerization to different extents. The dimer of methyl α-ethylacrylate was actually inactive during the styrene and methyl methacrylate polymerizations. The methacrylonitrile dimer was primarily incorporated in the polymer chain through copolymerization. Among the dimer and the cross-dimers from α-methylstyrene with the other monomers, those bearing the α-methylstyrene moiety in the α-substituent [CH₂?C(X)CH₂C(CH₃)₂C₆H₅, X?COOCH₃, COOC₂H₅, and CN] are noted as highly reactive chain transfer agents. © 1994 John Wiley & Sons, Inc.     

Structure and crystallization of sub-elementary fibrils of bacterial cellulose isolated by using a fluorescent brightening agent

The structure and crystallization of carefully isolated sub-elementary fibrils (SEFs) of bacterial cellulose have been investigated using TEM, WAXD, and high-resolution solid-state ¹³C NMR. The addition of a suitable amount of fluorescent brightener (FB) to the incubation medium of Acetobacter xylinum effectively suppressed the aggregation of the SEFs into the microfibrils, as previously reported. However, this study confirmed for the first time that serious structural change in the SEFs occurs during the removal of excess FB by washing with buffer solutions having pH values higher than 6 or with the alkaline aqueous solution that was frequently used in previous studies. In contrast, the isolation of unmodified SEFs was successfully performed by utilizing a washing protocol employing pH 7 citrate–phosphate buffer solution containing 1% sodium dodecyl sulfate. High-resolution solid-state ¹³C NMR and WAXD measurements revealed that the SEFs thus isolated are in the noncrystalline state in which the pyranose rings of the almost parallel cellulose chains appear to be stacked on each other. The respective CH₂OH groups of the SEFs adopt the gt conformation instead of the tg conformation found in cellulose I _α and I _β crystals, and undergo significantly enhanced molecular motion in the absence of intermolecular hydrogen bonding associated with these groups. The main chains are also subject to rapid motional fluctuations while maintaining the parallel orientation of the respective chains, indicating that the SEFs have a liquid crystal-like structure with high molecular mobility. Moreover, the SEFs crystallize into cellulose I _β when the FB molecules that may adhere to the surface of the SEFs are removed by extraction with boiling 70 v/v% ethanol and 0.1N NaOH aqueous solution. On the basis of these results, the crystallization of the SEFs into the I _α and I _β forms is discussed, including the possible formation of the crystalline-noncrystalline periodic structure in native cellulose.     

Cubic phases of 4′-n-alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC-n)

The structure of the thermotropic cubic phases of 4′- ⁿ -alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC- ⁿ , where ⁿ indicates the number of carbon atoms in the alkoxy group) was studied by X-ray diffraction. For the homologues with ⁿ = 15, 16, 17, and 18, the cubic phase was of an ^Ia 3 ^d type, whereas the homologues with ⁿ = 19, 20, and 21 exhibited an ^Im 3 ^m cubic structure; for these seven homologues the same type of cubic structure was observed both on heating and cooling. Further lengthening of the alkoxy chain to ⁿ = 22 and 26, however, gave two types of cubic structure in the cubic phase region on heating, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d symmetry in the high temperature region. On cooling, the two homologues exhibited the ^Ia 3 ^d cubic structure only. This is the first example in the cubic phase region of a series of homologues containing two types of structure, dependent on temperature and ⁿ . Such a complicated phase diagram in the cubic region is clearly understood qualitatively in terms of Gibbs free energy-temperature diagrams. The dependence of structural parameters such as the cubic lattice constant on the alkoxy chain length ⁿ are also presented and discussed.